All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pankaj Raghav <p.raghav@samsung.com>
To: snitzer@kernel.org, axboe@kernel.dk, agk@redhat.com, hch@lst.de,
	damien.lemoal@opensource.wdc.com
Cc: jaegeuk@kernel.org, gost.dev@samsung.com, bvanassche@acm.org,
	linux-kernel@vger.kernel.org, hare@suse.de,
	matias.bjorling@wdc.com, Johannes.Thumshirn@wdc.com,
	linux-block@vger.kernel.org, linux-nvme@lists.infradead.org,
	pankydev8@gmail.com, dm-devel@redhat.com,
	Pankaj Raghav <p.raghav@samsung.com>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Chaitanya Kulkarni <kch@nvidia.com>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH v15 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes
Date: Fri, 23 Sep 2022 19:36:11 +0200	[thread overview]
Message-ID: <20220923173618.6899-7-p.raghav@samsung.com> (raw)
In-Reply-To: <20220923173618.6899-1-p.raghav@samsung.com>

Convert the power-of-2(po2) based calculation with zone size to be generic
in null_zone_no with optimization for po2 zone sizes.

The nr_zones calculation in null_init_zoned_dev has been replaced with a
division without special handling for po2 zone sizes as this function is
called only during the initialization and will not be invoked in the hot
path.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
---
 drivers/block/null_blk/main.c     |  5 ++---
 drivers/block/null_blk/null_blk.h |  1 +
 drivers/block/null_blk/zoned.c    | 18 +++++++++++-------
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 1f154f92f4c2..3b24125d8594 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1976,9 +1976,8 @@ static int null_validate_conf(struct nullb_device *dev)
 	if (dev->queue_mode == NULL_Q_BIO)
 		dev->mbps = 0;
 
-	if (dev->zoned &&
-	    (!dev->zone_size || !is_power_of_2(dev->zone_size))) {
-		pr_err("zone_size must be power-of-two\n");
+	if (dev->zoned && !dev->zone_size) {
+		pr_err("Invalid zero zone size\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 94ff68052b1e..f63b6bed1bb3 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -83,6 +83,7 @@ struct nullb_device {
 	unsigned int imp_close_zone_no;
 	struct nullb_zone *zones;
 	sector_t zone_size_sects;
+	unsigned int zone_size_sects_shift;
 	bool need_zone_res_mgmt;
 	spinlock_t zone_res_lock;
 
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 55a69e48ef8b..015f6823706c 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -16,7 +16,10 @@ static inline sector_t mb_to_sects(unsigned long mb)
 
 static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
 {
-	return sect >> ilog2(dev->zone_size_sects);
+	if (dev->zone_size_sects_shift)
+		return sect >> dev->zone_size_sects_shift;
+
+	return div64_u64(sect, dev->zone_size_sects);
 }
 
 static inline void null_lock_zone_res(struct nullb_device *dev)
@@ -65,10 +68,6 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	sector_t sector = 0;
 	unsigned int i;
 
-	if (!is_power_of_2(dev->zone_size)) {
-		pr_err("zone_size must be power-of-two\n");
-		return -EINVAL;
-	}
 	if (dev->zone_size > dev->size) {
 		pr_err("Zone size larger than device capacity\n");
 		return -EINVAL;
@@ -86,9 +85,14 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	zone_capacity_sects = mb_to_sects(dev->zone_capacity);
 	dev_capacity_sects = mb_to_sects(dev->size);
 	dev->zone_size_sects = mb_to_sects(dev->zone_size);
-	dev->nr_zones = round_up(dev_capacity_sects, dev->zone_size_sects)
-		>> ilog2(dev->zone_size_sects);
 
+	if (is_power_of_2(dev->zone_size_sects))
+		dev->zone_size_sects_shift = ilog2(dev->zone_size_sects);
+	else
+		dev->zone_size_sects_shift = 0;
+
+	dev->nr_zones =	DIV_ROUND_UP_SECTOR_T(dev_capacity_sects,
+					      dev->zone_size_sects);
 	dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct nullb_zone),
 				    GFP_KERNEL | __GFP_ZERO);
 	if (!dev->zones)
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Pankaj Raghav <p.raghav@samsung.com>
To: snitzer@kernel.org, axboe@kernel.dk, agk@redhat.com, hch@lst.de,
	damien.lemoal@opensource.wdc.com
Cc: Pankaj Raghav <p.raghav@samsung.com>,
	Chaitanya Kulkarni <kch@nvidia.com>,
	bvanassche@acm.org, pankydev8@gmail.com, gost.dev@samsung.com,
	linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org,
	linux-block@vger.kernel.org, dm-devel@redhat.com,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>,
	jaegeuk@kernel.org, matias.bjorling@wdc.com,
	Luis Chamberlain <mcgrof@kernel.org>
Subject: [dm-devel] [PATCH v15 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes
Date: Fri, 23 Sep 2022 19:36:11 +0200	[thread overview]
Message-ID: <20220923173618.6899-7-p.raghav@samsung.com> (raw)
In-Reply-To: <20220923173618.6899-1-p.raghav@samsung.com>

Convert the power-of-2(po2) based calculation with zone size to be generic
in null_zone_no with optimization for po2 zone sizes.

The nr_zones calculation in null_init_zoned_dev has been replaced with a
division without special handling for po2 zone sizes as this function is
called only during the initialization and will not be invoked in the hot
path.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
---
 drivers/block/null_blk/main.c     |  5 ++---
 drivers/block/null_blk/null_blk.h |  1 +
 drivers/block/null_blk/zoned.c    | 18 +++++++++++-------
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 1f154f92f4c2..3b24125d8594 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1976,9 +1976,8 @@ static int null_validate_conf(struct nullb_device *dev)
 	if (dev->queue_mode == NULL_Q_BIO)
 		dev->mbps = 0;
 
-	if (dev->zoned &&
-	    (!dev->zone_size || !is_power_of_2(dev->zone_size))) {
-		pr_err("zone_size must be power-of-two\n");
+	if (dev->zoned && !dev->zone_size) {
+		pr_err("Invalid zero zone size\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 94ff68052b1e..f63b6bed1bb3 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -83,6 +83,7 @@ struct nullb_device {
 	unsigned int imp_close_zone_no;
 	struct nullb_zone *zones;
 	sector_t zone_size_sects;
+	unsigned int zone_size_sects_shift;
 	bool need_zone_res_mgmt;
 	spinlock_t zone_res_lock;
 
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 55a69e48ef8b..015f6823706c 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -16,7 +16,10 @@ static inline sector_t mb_to_sects(unsigned long mb)
 
 static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
 {
-	return sect >> ilog2(dev->zone_size_sects);
+	if (dev->zone_size_sects_shift)
+		return sect >> dev->zone_size_sects_shift;
+
+	return div64_u64(sect, dev->zone_size_sects);
 }
 
 static inline void null_lock_zone_res(struct nullb_device *dev)
@@ -65,10 +68,6 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	sector_t sector = 0;
 	unsigned int i;
 
-	if (!is_power_of_2(dev->zone_size)) {
-		pr_err("zone_size must be power-of-two\n");
-		return -EINVAL;
-	}
 	if (dev->zone_size > dev->size) {
 		pr_err("Zone size larger than device capacity\n");
 		return -EINVAL;
@@ -86,9 +85,14 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	zone_capacity_sects = mb_to_sects(dev->zone_capacity);
 	dev_capacity_sects = mb_to_sects(dev->size);
 	dev->zone_size_sects = mb_to_sects(dev->zone_size);
-	dev->nr_zones = round_up(dev_capacity_sects, dev->zone_size_sects)
-		>> ilog2(dev->zone_size_sects);
 
+	if (is_power_of_2(dev->zone_size_sects))
+		dev->zone_size_sects_shift = ilog2(dev->zone_size_sects);
+	else
+		dev->zone_size_sects_shift = 0;
+
+	dev->nr_zones =	DIV_ROUND_UP_SECTOR_T(dev_capacity_sects,
+					      dev->zone_size_sects);
 	dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct nullb_zone),
 				    GFP_KERNEL | __GFP_ZERO);
 	if (!dev->zones)
-- 
2.25.1

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel


  parent reply	other threads:[~2022-09-23 17:36 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20220923173619eucas1p13e645adbe1c8eb62fb48b52c0248ed65@eucas1p1.samsung.com>
2022-09-23 17:36 ` [PATCH v15 00/13] support zoned block devices with non-power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36   ` [dm-devel] " Pankaj Raghav
     [not found]   ` <CGME20220923173620eucas1p2ba21805261fe5ad86c38c0f52daeaa3a@eucas1p2.samsung.com>
2022-09-23 17:36     ` [PATCH v15 01/13] block: make bdev_nr_zones and disk_zone_no generic for npo2 zone size Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] " Pankaj Raghav
     [not found]   ` <CGME20220923173621eucas1p11d1d89e187b39e057c7dfb58756c6a2e@eucas1p1.samsung.com>
2022-09-23 17:36     ` [PATCH v15 02/13] block: rearrange bdev_{is_zoned,zone_sectors,get_queue} helper in blkdev.h Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] [PATCH v15 02/13] block: rearrange bdev_{is_zoned, zone_sectors, get_queue} " Pankaj Raghav
     [not found]   ` <CGME20220923173623eucas1p2aeb5444a1005282b630706d60e18a5ba@eucas1p2.samsung.com>
2022-09-23 17:36     ` [PATCH v15 03/13] block: allow blk-zoned devices to have non-power-of-2 zone size Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] " Pankaj Raghav
     [not found]   ` <CGME20220923173624eucas1p19e66d02c7f4dfd2da262b783ef440156@eucas1p1.samsung.com>
2022-09-23 17:36     ` [PATCH v15 04/13] nvmet: Allow ZNS target to support non-power_of_2 zone sizes Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] " Pankaj Raghav
     [not found]   ` <CGME20220923173625eucas1p147864849427469a90bf5c3ce547105c2@eucas1p1.samsung.com>
2022-09-23 17:36     ` [PATCH v15 05/13] nvme: zns: Allow ZNS drives that have non-power_of_2 zone size Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] " Pankaj Raghav
     [not found]   ` <CGME20220923173626eucas1p2e06c400ad3c18fe8f33c0b4ab1a25bf0@eucas1p2.samsung.com>
2022-09-23 17:36     ` Pankaj Raghav [this message]
2022-09-23 17:36       ` [dm-devel] [PATCH v15 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes Pankaj Raghav
     [not found]   ` <CGME20220923173627eucas1p2f134d9cb331e4a8f0fca8431eeb0f0b0@eucas1p2.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 07/13] zonefs: allow non power of 2 zoned devices Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
2022-09-28 18:10       ` Bart Van Assche
2022-09-28 18:10         ` [dm-devel] " Bart Van Assche
     [not found]   ` <CGME20220923173628eucas1p1837557826439e7cd6690b46628290037@eucas1p1.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 08/13] dm-zoned: ensure only power of 2 zone sizes are allowed Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
     [not found]   ` <CGME20220923173629eucas1p27c1ebffb55c2f1a52fad913840b16d02@eucas1p2.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 09/13] dm-zone: use generic helpers to calculate offset from zone start Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
     [not found]   ` <CGME20220923173630eucas1p2bae6918f0c165051464e62c5172a80e0@eucas1p2.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 10/13] dm-table: allow zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
     [not found]   ` <CGME20220923173631eucas1p23cceb8438d6b8b9c3460192c0ad2472d@eucas1p2.samsung.com>
2022-09-23 17:36     ` [PATCH v15 11/13] dm: call dm_zone_endio after the target endio callback for zoned devices Pankaj Raghav
2022-09-23 17:36       ` [dm-devel] " Pankaj Raghav
2022-09-28 18:13       ` Bart Van Assche
2022-09-28 18:13         ` [dm-devel] " Bart Van Assche
     [not found]   ` <CGME20220923173632eucas1p1a4b8cba427f5caf649009073233f8c76@eucas1p1.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 12/13] dm: introduce DM_EMULATED_ZONES target feature flag Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
     [not found]   ` <CGME20220923173634eucas1p18fccee11155c670354da389b4d2f4c60@eucas1p1.samsung.com>
2022-09-23 17:36     ` [dm-devel] [PATCH v15 13/13] dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36       ` Pankaj Raghav
2022-09-27 16:07       ` Pankaj Raghav
2022-09-27 16:07         ` [dm-devel] " Pankaj Raghav
2022-09-28 14:22       ` Mike Snitzer
2022-09-28 14:22         ` [dm-devel] " Mike Snitzer
2022-09-29  6:31   ` [PATCH v15 00/13] support zoned block devices with non-power-of-2 " Pankaj Raghav
2022-09-29  6:31     ` [dm-devel] " Pankaj Raghav
2022-09-30 15:13     ` Jens Axboe
2022-09-30 15:13       ` [dm-devel] " Jens Axboe
2022-09-30 19:38       ` Bart Van Assche
2022-09-30 19:38         ` [dm-devel] " Bart Van Assche
2022-09-30 21:24         ` Jens Axboe
2022-09-30 21:24           ` [dm-devel] " Jens Axboe
2022-10-24 19:02           ` Bart Van Assche
2022-10-24 19:02             ` [dm-devel] " Bart Van Assche
2022-10-01  0:45         ` Damien Le Moal
2022-10-01  0:45           ` [dm-devel] " Damien Le Moal
2022-10-01  2:14           ` Bart Van Assche
2022-10-01  2:14             ` [dm-devel] " Bart Van Assche
2023-01-04  5:29   ` Can Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220923173618.6899-7-p.raghav@samsung.com \
    --to=p.raghav@samsung.com \
    --cc=Johannes.Thumshirn@wdc.com \
    --cc=agk@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=dm-devel@redhat.com \
    --cc=gost.dev@samsung.com \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=jaegeuk@kernel.org \
    --cc=kch@nvidia.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=matias.bjorling@wdc.com \
    --cc=mcgrof@kernel.org \
    --cc=pankydev8@gmail.com \
    --cc=snitzer@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.