From: Chris Morgan <macroalpha82@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, daniel@ffwll.ch, airlied@gmail.com,
sam@ravnborg.org, thierry.reding@gmail.com,
maccraft123mc@gmail.com, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V3 0/3] drm/panel: Add NewVision NV3051D Panels
Date: Mon, 26 Sep 2022 14:14:25 -0500 [thread overview]
Message-ID: <20220926191428.4801-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
Add the NewVision NV3051D panel as found on the Anbernic RG353P and
RG353V. The underlying LCD panel itself is unknown (the NV3051D is
the controller), so the device name is used for the panel with a
fallback to the driver IC.
Changes from V2:
- Ensured dt_binding_check and dtbs_check successfully passed.
- Corrected some minor formatting issues in documentation.
- Added another mode per userspace request for 100hz. I was unable
to find a supported 50hz mode that would also work, so for now
only 60hz, 100hz, and 120hz are supported.
Changes from V1:
- Changed compatible string to the driver IC.
- Updated documentation to use new compatible string with board
name.
- Refactored somewhat to make it easier to support other LCD panels
with this kernel module.
- Added support for 60hz mode. Adjusted pixel clock to ensure proper
60hz and 120hz (previously was running at 124hz).
- Added vendor prefix for NewVision. Anbernic vendor prefix added in
https://lore.kernel.org/linux-devicetree/20220906210324.28986-2-macroalpha82@gmail.com
Chris Morgan (3):
dt-bindings: vendor-prefixes: add NewVision vendor prefix
dt-bindings: display: panel: Add NewVision NV3051D bindings
drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel
.../display/panel/newvision,nv3051d.yaml | 63 +++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-newvision-nv3051d.c | 525 ++++++++++++++++++
5 files changed, 600 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3051d.c
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
Chris Morgan <macromorgan@hotmail.com>,
robh+dt@kernel.org, thierry.reding@gmail.com, sam@ravnborg.org,
maccraft123mc@gmail.com
Subject: [PATCH V3 0/3] drm/panel: Add NewVision NV3051D Panels
Date: Mon, 26 Sep 2022 14:14:25 -0500 [thread overview]
Message-ID: <20220926191428.4801-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
Add the NewVision NV3051D panel as found on the Anbernic RG353P and
RG353V. The underlying LCD panel itself is unknown (the NV3051D is
the controller), so the device name is used for the panel with a
fallback to the driver IC.
Changes from V2:
- Ensured dt_binding_check and dtbs_check successfully passed.
- Corrected some minor formatting issues in documentation.
- Added another mode per userspace request for 100hz. I was unable
to find a supported 50hz mode that would also work, so for now
only 60hz, 100hz, and 120hz are supported.
Changes from V1:
- Changed compatible string to the driver IC.
- Updated documentation to use new compatible string with board
name.
- Refactored somewhat to make it easier to support other LCD panels
with this kernel module.
- Added support for 60hz mode. Adjusted pixel clock to ensure proper
60hz and 120hz (previously was running at 124hz).
- Added vendor prefix for NewVision. Anbernic vendor prefix added in
https://lore.kernel.org/linux-devicetree/20220906210324.28986-2-macroalpha82@gmail.com
Chris Morgan (3):
dt-bindings: vendor-prefixes: add NewVision vendor prefix
dt-bindings: display: panel: Add NewVision NV3051D bindings
drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel
.../display/panel/newvision,nv3051d.yaml | 63 +++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-newvision-nv3051d.c | 525 ++++++++++++++++++
5 files changed, 600 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3051d.c
--
2.25.1
next reply other threads:[~2022-09-26 19:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 19:14 Chris Morgan [this message]
2022-09-26 19:14 ` [PATCH V3 0/3] drm/panel: Add NewVision NV3051D Panels Chris Morgan
2022-09-26 19:14 ` [PATCH V3 1/3] dt-bindings: vendor-prefixes: add NewVision vendor prefix Chris Morgan
2022-09-26 19:14 ` Chris Morgan
2022-09-26 19:14 ` [PATCH V3 2/3] dt-bindings: display: panel: Add NewVision NV3051D bindings Chris Morgan
2022-09-26 19:14 ` Chris Morgan
2022-09-29 21:54 ` Rob Herring
2022-09-29 21:54 ` Rob Herring
2022-09-26 19:14 ` [PATCH V3 3/3] drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel Chris Morgan
2022-09-26 19:14 ` Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220926191428.4801-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.