From: Kevin Hilman <khilman@baylibre.com> To: Peter Ujfalusi <peter.ujfalusi@gmail.com>, dmaengine@vger.kernel.org Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nicolas Frayer <nfrayer@baylibre.com> Subject: [PATCH v3 3/3] dmaengine: ti: convert PSIL to be buildable as module Date: Thu, 29 Sep 2022 16:48:20 -0700 [thread overview] Message-ID: <20220929234820.940048-4-khilman@baylibre.com> (raw) In-Reply-To: <20220929234820.940048-1-khilman@baylibre.com> Combine all the SoC specific files into a single lib that can be built-in or built as a module. Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> --- drivers/dma/ti/Kconfig | 3 ++- drivers/dma/ti/Makefile | 15 ++++++++------- drivers/dma/ti/k3-psil.c | 2 ++ 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index f196be3b222f..2adc2cca10e9 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -56,7 +56,8 @@ config TI_K3_UDMA_GLUE_LAYER If unsure, say N. config TI_K3_PSIL - bool + tristate + default TI_K3_UDMA config TI_DMA_CROSSBAR bool diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile index d3a303f0d7c6..b53d05b11ca5 100644 --- a/drivers/dma/ti/Makefile +++ b/drivers/dma/ti/Makefile @@ -4,11 +4,12 @@ obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_DMA_OMAP) += omap-dma.o obj-$(CONFIG_TI_K3_UDMA) += k3-udma.o obj-$(CONFIG_TI_K3_UDMA_GLUE_LAYER) += k3-udma-glue.o -obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o \ - k3-psil-am654.o \ - k3-psil-j721e.o \ - k3-psil-j7200.o \ - k3-psil-am64.o \ - k3-psil-j721s2.o \ - k3-psil-am62.o +k3-psil-lib-objs := k3-psil.o \ + k3-psil-am654.o \ + k3-psil-j721e.o \ + k3-psil-j7200.o \ + k3-psil-am64.o \ + k3-psil-j721s2.o \ + k3-psil-am62.o +obj-$(CONFIG_TI_K3_PSIL) += k3-psil-lib.o obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c index 761a384093d2..8b6533a1eeeb 100644 --- a/drivers/dma/ti/k3-psil.c +++ b/drivers/dma/ti/k3-psil.c @@ -5,6 +5,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/device.h> #include <linux/init.h> #include <linux/mutex.h> @@ -101,3 +102,4 @@ int psil_set_new_ep_config(struct device *dev, const char *name, return 0; } EXPORT_SYMBOL_GPL(psil_set_new_ep_config); +MODULE_LICENSE("GPL v2"); -- 2.34.0
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com> To: Peter Ujfalusi <peter.ujfalusi@gmail.com>, dmaengine@vger.kernel.org Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nicolas Frayer <nfrayer@baylibre.com> Subject: [PATCH v3 3/3] dmaengine: ti: convert PSIL to be buildable as module Date: Thu, 29 Sep 2022 16:48:20 -0700 [thread overview] Message-ID: <20220929234820.940048-4-khilman@baylibre.com> (raw) In-Reply-To: <20220929234820.940048-1-khilman@baylibre.com> Combine all the SoC specific files into a single lib that can be built-in or built as a module. Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> --- drivers/dma/ti/Kconfig | 3 ++- drivers/dma/ti/Makefile | 15 ++++++++------- drivers/dma/ti/k3-psil.c | 2 ++ 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index f196be3b222f..2adc2cca10e9 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -56,7 +56,8 @@ config TI_K3_UDMA_GLUE_LAYER If unsure, say N. config TI_K3_PSIL - bool + tristate + default TI_K3_UDMA config TI_DMA_CROSSBAR bool diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile index d3a303f0d7c6..b53d05b11ca5 100644 --- a/drivers/dma/ti/Makefile +++ b/drivers/dma/ti/Makefile @@ -4,11 +4,12 @@ obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_DMA_OMAP) += omap-dma.o obj-$(CONFIG_TI_K3_UDMA) += k3-udma.o obj-$(CONFIG_TI_K3_UDMA_GLUE_LAYER) += k3-udma-glue.o -obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o \ - k3-psil-am654.o \ - k3-psil-j721e.o \ - k3-psil-j7200.o \ - k3-psil-am64.o \ - k3-psil-j721s2.o \ - k3-psil-am62.o +k3-psil-lib-objs := k3-psil.o \ + k3-psil-am654.o \ + k3-psil-j721e.o \ + k3-psil-j7200.o \ + k3-psil-am64.o \ + k3-psil-j721s2.o \ + k3-psil-am62.o +obj-$(CONFIG_TI_K3_PSIL) += k3-psil-lib.o obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c index 761a384093d2..8b6533a1eeeb 100644 --- a/drivers/dma/ti/k3-psil.c +++ b/drivers/dma/ti/k3-psil.c @@ -5,6 +5,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/device.h> #include <linux/init.h> #include <linux/mutex.h> @@ -101,3 +102,4 @@ int psil_set_new_ep_config(struct device *dev, const char *name, return 0; } EXPORT_SYMBOL_GPL(psil_set_new_ep_config); +MODULE_LICENSE("GPL v2"); -- 2.34.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-29 23:48 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-29 23:48 [PATCH v3 0/3] dma/ti: enable udma and psil to be built as modules Kevin Hilman 2022-09-29 23:48 ` Kevin Hilman 2022-09-29 23:48 ` [PATCH v3 1/3] of/irq: export of_msi_get_domain Kevin Hilman 2022-09-29 23:48 ` Kevin Hilman 2022-09-29 23:48 ` [PATCH v3 2/3] dmaengine: ti: convert k3-udma to module Kevin Hilman 2022-09-29 23:48 ` Kevin Hilman 2022-09-29 23:48 ` Kevin Hilman [this message] 2022-09-29 23:48 ` [PATCH v3 3/3] dmaengine: ti: convert PSIL to be buildable as module Kevin Hilman 2022-10-04 17:55 ` [PATCH v3 0/3] dma/ti: enable udma and psil to be built as modules Péter Ujfalusi 2022-10-04 17:55 ` Péter Ujfalusi 2022-10-19 13:28 ` Vinod Koul 2022-10-19 13:28 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220929234820.940048-4-khilman@baylibre.com \ --to=khilman@baylibre.com \ --cc=dmaengine@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=nfrayer@baylibre.com \ --cc=peter.ujfalusi@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.