From: Colin Foster <colin.foster@in-advantage.com> To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Tony Lindgren" <tony@atomide.com>, "Benoît Cousson" <bcousson@baylibre.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, soc@kernel.org, "Olof Johansson" <olof@lixom.net>, "Arnd Bergmann" <arnd@arndb.de> Subject: [RFC v1 1/1] arm: dts: omap4: pcm959: add initial support for phytec pcm959 Date: Mon, 3 Oct 2022 19:40:12 -0700 [thread overview] Message-ID: <20221004024012.1386218-2-colin.foster@in-advantage.com> (raw) In-Reply-To: <20221004024012.1386218-1-colin.foster@in-advantage.com> The Phytec PCM-959 is a development platform for the Phytec PCM-049 SOM. Add initial functionality for the board. The verified interfaces and peripherals are listed below for the SOM (PCM-049) and the dev board (PCM-959) The omap2plus_defconfig was used for testing. Only the On-board LEDs required CONFIG_LEDS_PCA9532 addition. PCM-049: i2c1 * EEPROM at 0x50 * TMP102 (hwmon) at 0x4b twl6030 GPMC * Ethernet * Flash Serial (ttyS2 console) PCM959: MMC1 On-board LEDs (with CONFIG_LEDS_PCA9532) Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi | 352 ++++++++++++++++++++ arch/arm/boot/dts/omap4-phytec-pcm-959.dts | 130 ++++++++ 3 files changed, 483 insertions(+) create mode 100644 arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi create mode 100644 arch/arm/boot/dts/omap4-phytec-pcm-959.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 27eec8e670ec..ef225150c5d7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -949,6 +949,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-phytec-pcm-959.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git a/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi b/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi new file mode 100644 index 000000000000..05b5cd581f15 --- /dev/null +++ b/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Innovative Advantage, Inc. + */ +#include <dt-bindings/input/input.h> + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@98000000 { + compatible = "shared-dma-pool"; + reg = <0x98000000 0x800000>; + reusable; + status = "okay"; + }; + + ipu_memory_region: ipu-memory@98800000 { + compatible = "shared-dma-pool"; + reg = <0x98800000 0x7000000>; + reusable; + status = "okay"; + }; + }; + + chosen { + stdout-path = &uart3; + }; + + leds: leds { + status = "okay"; + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = < + &led_gpio_pins + >; + + heartbeat { + label = "modul:red:status1"; + gpios = <&gpio5 0x18 GPIO_ACTIVE_HIGH>; /* GPIO 152 */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "modul:green:status2"; + gpios = <&gpio5 0x19 GPIO_ACTIVE_HIGH>; /* GPIO 153 */ + linux,default-trigger = "mmc0"; + }; + }; +}; + +&omap4_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* uart1_rx */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE1) /* uart1_tx */ + >; + }; + + led_gpio_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x156, PIN_OUTPUT | MUX_MODE3) /* gpio_152 */ + OMAP4_IOPAD(0x158, PIN_OUTPUT | MUX_MODE3) /* gpio_153 */ + >; + }; + + pinctrl_tempsense: pinmux_pinctrl_tempsense_pins{ + pinctrl-single,pins = < + OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_151 */ + >; + }; + + gpmc_pins: gpmc_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x40, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0 */ + OMAP4_IOPAD(0x42, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1 */ + OMAP4_IOPAD(0x44, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2 */ + OMAP4_IOPAD(0x46, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3 */ + OMAP4_IOPAD(0x48, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4 */ + OMAP4_IOPAD(0x4a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5 */ + OMAP4_IOPAD(0x4c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6 */ + OMAP4_IOPAD(0x4e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7 */ + OMAP4_IOPAD(0x50, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad8 */ + OMAP4_IOPAD(0x52, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad9 */ + OMAP4_IOPAD(0x54, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad10 */ + OMAP4_IOPAD(0x56, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad11 */ + OMAP4_IOPAD(0x58, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad12 */ + OMAP4_IOPAD(0x5a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad13 */ + OMAP4_IOPAD(0x5c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad14 */ + OMAP4_IOPAD(0x5e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad15 */ + + OMAP4_IOPAD(0x60, PIN_OUTPUT | MUX_MODE0) /* gpmc_a16 */ + OMAP4_IOPAD(0x62, PIN_OUTPUT | MUX_MODE0) /* gpmc_a17 */ + OMAP4_IOPAD(0x64, PIN_OUTPUT | MUX_MODE0) /* gpmc_a18 */ + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE0) /* gpmc_a19 */ + OMAP4_IOPAD(0x68, PIN_OUTPUT | MUX_MODE0) /* gpmc_a20 */ + OMAP4_IOPAD(0x6a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a21 */ + OMAP4_IOPAD(0x6c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a22 */ + OMAP4_IOPAD(0x6e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a23 */ + + OMAP4_IOPAD(0x82, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_noe */ + OMAP4_IOPAD(0x84, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nwe */ + + OMAP4_IOPAD(0x7c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nwp */ + OMAP4_IOPAD(0x80, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nadv_ale */ + OMAP4_IOPAD(0x86, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nbe0_cle */ + OMAP4_IOPAD(0x8a, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + OMAP4_IOPAD(0x8c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait1 */ + + OMAP4_IOPAD(0x74, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs0 */ + OMAP4_IOPAD(0x76, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs1 */ + OMAP4_IOPAD(0x92, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs5 */ + >; + }; + + ethernet_pins: ethernet_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE3) /* gpio_121 */ + >; + }; + + tps62361_pins: pinmux_tps62361_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpio_182 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + +}; + +&omap4_pmx_wkup { + ethernet_wkgpio_pins: pinmux_ethernet_wkpins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE3) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + status = "okay"; + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + }; + + core_vdd_reg: tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + status = "okay"; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; + ti,vsel0-state-high; + }; + + temperature-sensor@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "disabled"; + + clock-frequency = <400000>; +}; + +&vmmc { + ti,retain-on-reset; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&elm { + status = "okay"; +}; + +#include "omap-gpmc-smsc9221.dtsi" + +&gpmc { + ranges = <5 0 0x2c000000 0x01000000>, + <0 0 0x08000000 0x01000000>; + pinctrl-names = "default"; + pinctrl-0 = < + &gpmc_pins + >; + status = "okay"; + + nandflash: nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + ti,elm-id=<&elm>; + linux,mtd-name = "micron,nand"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@gpmc { + reg = <5 0 0xff>; + + pinctrl-names = "default"; + pinctrl-0 = < + ðernet_pins + ðernet_wkgpio_pins + >; + + /* Either GPIO 103 or GPIO 121. Use 121 to match the reference design */ + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-phytec-pcm-959.dts b/arch/arm/boot/dts/omap4-phytec-pcm-959.dts new file mode 100644 index 000000000000..dca2b1dd4d51 --- /dev/null +++ b/arch/arm/boot/dts/omap4-phytec-pcm-959.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Innovative Advantage, Inc. + */ +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include "omap4460.dtsi" +#include "omap4-phytec-pcm-049.dtsi" + +/ { + model = "Phytec PCM-959 Eval Board"; + compatible = "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &sr_wkup_pins + &fref_xtal_in_pins + &fref_clk3_out_pins + &gpio_wk7_pins + &fref_clk4_out_pins + &sys_pins + &tps62361_pins + >; + + status = "okay"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT | MUX_MODE0) /* uart3_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + >; + }; +}; + +&gpio1_target { + ti,no-reset-on-init; +}; + +&omap4_pmx_wkup { + sr_wkup_pins: pinmux_sr_wkup_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x4a, PIN_INPUT_PULLUP | MUX_MODE0) /* sr_scl */ + OMAP4_IOPAD(0x4c, PIN_INPUT_PULLUP | MUX_MODE0) /* sr_sda */ + >; + }; + + fref_xtal_in_pins: pinmux_fref_xtal_in_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x4e, PIN_OUTPUT | MUX_MODE0) /* fref_xtal_in */ + >; + }; + + fref_clk3_out_pins: pinmux_fref_clk3_out_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x58, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ + >; + }; + + gpio_wk7_pins: pinmux_gpio_wk7_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5a, PIN_INPUT | MUX_MODE3) /* fref_clk4_req */ + >; + }; + + fref_clk4_out_pins: pinmux_fref_clk4_out_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5c, PIN_OUTPUT | MUX_MODE0) /* fref_clk4_out */ + >; + }; + + sys_pins: pinmux_sys_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5e, PIN_INPUT | MUX_MODE0) /* sys_32k */ + OMAP4_IOPAD(0x60, PIN_OUTPUT | MUX_MODE0) /* sys_nrespwron */ + OMAP4_IOPAD(0x62, PIN_OUTPUT | MUX_MODE0) /* sys_nreswarm */ + OMAP4_IOPAD(0x64, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sys_pwr_req */ + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE0) /* sys_pwron_reset_out */ + OMAP4_IOPAD(0x68, PIN_OUTPUT | MUX_MODE0) /* sys_boot6 */ + OMAP4_IOPAD(0x6a, PIN_OUTPUT | MUX_MODE0) /* sys_boot7 */ + >; + }; +}; + +&i2c4 { + status = "okay"; + + leddim: leddimmer@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + label = "board:red:free_use1"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led2 { + label = "board:yellow:free_use2"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led3 { + label = "board:yellow:free_use3"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led4 { + label = "board:green:free_use4"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + }; +}; + -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Colin Foster <colin.foster@in-advantage.com> To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Tony Lindgren" <tony@atomide.com>, "Benoît Cousson" <bcousson@baylibre.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, soc@kernel.org, "Olof Johansson" <olof@lixom.net>, "Arnd Bergmann" <arnd@arndb.de> Subject: [RFC v1 1/1] arm: dts: omap4: pcm959: add initial support for phytec pcm959 Date: Mon, 3 Oct 2022 19:40:12 -0700 [thread overview] Message-ID: <20221004024012.1386218-2-colin.foster@in-advantage.com> (raw) In-Reply-To: <20221004024012.1386218-1-colin.foster@in-advantage.com> The Phytec PCM-959 is a development platform for the Phytec PCM-049 SOM. Add initial functionality for the board. The verified interfaces and peripherals are listed below for the SOM (PCM-049) and the dev board (PCM-959) The omap2plus_defconfig was used for testing. Only the On-board LEDs required CONFIG_LEDS_PCA9532 addition. PCM-049: i2c1 * EEPROM at 0x50 * TMP102 (hwmon) at 0x4b twl6030 GPMC * Ethernet * Flash Serial (ttyS2 console) PCM959: MMC1 On-board LEDs (with CONFIG_LEDS_PCA9532) Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi | 352 ++++++++++++++++++++ arch/arm/boot/dts/omap4-phytec-pcm-959.dts | 130 ++++++++ 3 files changed, 483 insertions(+) create mode 100644 arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi create mode 100644 arch/arm/boot/dts/omap4-phytec-pcm-959.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 27eec8e670ec..ef225150c5d7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -949,6 +949,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-phytec-pcm-959.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git a/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi b/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi new file mode 100644 index 000000000000..05b5cd581f15 --- /dev/null +++ b/arch/arm/boot/dts/omap4-phytec-pcm-049.dtsi @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Innovative Advantage, Inc. + */ +#include <dt-bindings/input/input.h> + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@98000000 { + compatible = "shared-dma-pool"; + reg = <0x98000000 0x800000>; + reusable; + status = "okay"; + }; + + ipu_memory_region: ipu-memory@98800000 { + compatible = "shared-dma-pool"; + reg = <0x98800000 0x7000000>; + reusable; + status = "okay"; + }; + }; + + chosen { + stdout-path = &uart3; + }; + + leds: leds { + status = "okay"; + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = < + &led_gpio_pins + >; + + heartbeat { + label = "modul:red:status1"; + gpios = <&gpio5 0x18 GPIO_ACTIVE_HIGH>; /* GPIO 152 */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "modul:green:status2"; + gpios = <&gpio5 0x19 GPIO_ACTIVE_HIGH>; /* GPIO 153 */ + linux,default-trigger = "mmc0"; + }; + }; +}; + +&omap4_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* uart1_rx */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE1) /* uart1_tx */ + >; + }; + + led_gpio_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x156, PIN_OUTPUT | MUX_MODE3) /* gpio_152 */ + OMAP4_IOPAD(0x158, PIN_OUTPUT | MUX_MODE3) /* gpio_153 */ + >; + }; + + pinctrl_tempsense: pinmux_pinctrl_tempsense_pins{ + pinctrl-single,pins = < + OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_151 */ + >; + }; + + gpmc_pins: gpmc_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x40, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0 */ + OMAP4_IOPAD(0x42, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1 */ + OMAP4_IOPAD(0x44, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2 */ + OMAP4_IOPAD(0x46, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3 */ + OMAP4_IOPAD(0x48, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4 */ + OMAP4_IOPAD(0x4a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5 */ + OMAP4_IOPAD(0x4c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6 */ + OMAP4_IOPAD(0x4e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7 */ + OMAP4_IOPAD(0x50, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad8 */ + OMAP4_IOPAD(0x52, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad9 */ + OMAP4_IOPAD(0x54, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad10 */ + OMAP4_IOPAD(0x56, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad11 */ + OMAP4_IOPAD(0x58, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad12 */ + OMAP4_IOPAD(0x5a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad13 */ + OMAP4_IOPAD(0x5c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad14 */ + OMAP4_IOPAD(0x5e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad15 */ + + OMAP4_IOPAD(0x60, PIN_OUTPUT | MUX_MODE0) /* gpmc_a16 */ + OMAP4_IOPAD(0x62, PIN_OUTPUT | MUX_MODE0) /* gpmc_a17 */ + OMAP4_IOPAD(0x64, PIN_OUTPUT | MUX_MODE0) /* gpmc_a18 */ + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE0) /* gpmc_a19 */ + OMAP4_IOPAD(0x68, PIN_OUTPUT | MUX_MODE0) /* gpmc_a20 */ + OMAP4_IOPAD(0x6a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a21 */ + OMAP4_IOPAD(0x6c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a22 */ + OMAP4_IOPAD(0x6e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a23 */ + + OMAP4_IOPAD(0x82, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_noe */ + OMAP4_IOPAD(0x84, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nwe */ + + OMAP4_IOPAD(0x7c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nwp */ + OMAP4_IOPAD(0x80, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nadv_ale */ + OMAP4_IOPAD(0x86, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* gpmc_nbe0_cle */ + OMAP4_IOPAD(0x8a, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + OMAP4_IOPAD(0x8c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait1 */ + + OMAP4_IOPAD(0x74, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs0 */ + OMAP4_IOPAD(0x76, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs1 */ + OMAP4_IOPAD(0x92, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_ncs5 */ + >; + }; + + ethernet_pins: ethernet_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE3) /* gpio_121 */ + >; + }; + + tps62361_pins: pinmux_tps62361_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpio_182 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + +}; + +&omap4_pmx_wkup { + ethernet_wkgpio_pins: pinmux_ethernet_wkpins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE3) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + status = "okay"; + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + }; + + core_vdd_reg: tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + status = "okay"; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; + ti,vsel0-state-high; + }; + + temperature-sensor@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "disabled"; + + clock-frequency = <400000>; +}; + +&vmmc { + ti,retain-on-reset; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&elm { + status = "okay"; +}; + +#include "omap-gpmc-smsc9221.dtsi" + +&gpmc { + ranges = <5 0 0x2c000000 0x01000000>, + <0 0 0x08000000 0x01000000>; + pinctrl-names = "default"; + pinctrl-0 = < + &gpmc_pins + >; + status = "okay"; + + nandflash: nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + ti,elm-id=<&elm>; + linux,mtd-name = "micron,nand"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@gpmc { + reg = <5 0 0xff>; + + pinctrl-names = "default"; + pinctrl-0 = < + ðernet_pins + ðernet_wkgpio_pins + >; + + /* Either GPIO 103 or GPIO 121. Use 121 to match the reference design */ + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-phytec-pcm-959.dts b/arch/arm/boot/dts/omap4-phytec-pcm-959.dts new file mode 100644 index 000000000000..dca2b1dd4d51 --- /dev/null +++ b/arch/arm/boot/dts/omap4-phytec-pcm-959.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Innovative Advantage, Inc. + */ +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include "omap4460.dtsi" +#include "omap4-phytec-pcm-049.dtsi" + +/ { + model = "Phytec PCM-959 Eval Board"; + compatible = "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &sr_wkup_pins + &fref_xtal_in_pins + &fref_clk3_out_pins + &gpio_wk7_pins + &fref_clk4_out_pins + &sys_pins + &tps62361_pins + >; + + status = "okay"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT | MUX_MODE0) /* uart3_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + >; + }; +}; + +&gpio1_target { + ti,no-reset-on-init; +}; + +&omap4_pmx_wkup { + sr_wkup_pins: pinmux_sr_wkup_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x4a, PIN_INPUT_PULLUP | MUX_MODE0) /* sr_scl */ + OMAP4_IOPAD(0x4c, PIN_INPUT_PULLUP | MUX_MODE0) /* sr_sda */ + >; + }; + + fref_xtal_in_pins: pinmux_fref_xtal_in_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x4e, PIN_OUTPUT | MUX_MODE0) /* fref_xtal_in */ + >; + }; + + fref_clk3_out_pins: pinmux_fref_clk3_out_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x58, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ + >; + }; + + gpio_wk7_pins: pinmux_gpio_wk7_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5a, PIN_INPUT | MUX_MODE3) /* fref_clk4_req */ + >; + }; + + fref_clk4_out_pins: pinmux_fref_clk4_out_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5c, PIN_OUTPUT | MUX_MODE0) /* fref_clk4_out */ + >; + }; + + sys_pins: pinmux_sys_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x5e, PIN_INPUT | MUX_MODE0) /* sys_32k */ + OMAP4_IOPAD(0x60, PIN_OUTPUT | MUX_MODE0) /* sys_nrespwron */ + OMAP4_IOPAD(0x62, PIN_OUTPUT | MUX_MODE0) /* sys_nreswarm */ + OMAP4_IOPAD(0x64, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sys_pwr_req */ + OMAP4_IOPAD(0x66, PIN_OUTPUT | MUX_MODE0) /* sys_pwron_reset_out */ + OMAP4_IOPAD(0x68, PIN_OUTPUT | MUX_MODE0) /* sys_boot6 */ + OMAP4_IOPAD(0x6a, PIN_OUTPUT | MUX_MODE0) /* sys_boot7 */ + >; + }; +}; + +&i2c4 { + status = "okay"; + + leddim: leddimmer@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + label = "board:red:free_use1"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led2 { + label = "board:yellow:free_use2"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led3 { + label = "board:yellow:free_use3"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + + led4 { + label = "board:green:free_use4"; + linux,default-trigger = "none"; + type = <PCA9532_TYPE_LED>; + }; + }; +}; + -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-04 2:40 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-04 2:40 [RFC v1 0/1] add support for Phytec PCM-049 and PCM-959 Colin Foster 2022-10-04 2:40 ` Colin Foster 2022-10-04 2:40 ` Colin Foster [this message] 2022-10-04 2:40 ` [RFC v1 1/1] arm: dts: omap4: pcm959: add initial support for phytec pcm959 Colin Foster 2022-10-04 7:04 ` Krzysztof Kozlowski 2022-10-04 7:04 ` Krzysztof Kozlowski 2022-10-04 23:01 ` Colin Foster 2022-10-04 23:01 ` Colin Foster
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221004024012.1386218-2-colin.foster@in-advantage.com \ --to=colin.foster@in-advantage.com \ --cc=arnd@arndb.de \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.