[PATCH v7 2/4] thermal: mediatek: control buffer enablement tweaks - Amjad Ouled-Ameur

From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>
Cc: AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Fabien Parent <fparent@baylibre.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Markus Schneider-Pargmann <msp@baylibre.com>,
	linux-pm@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Michael Kao <michael.kao@mediatek.com>,
	linux-kernel@vger.kernel.org, Hsin-Yi Wang <hsinyi@chromium.org>,
	Amjad Ouled-Ameur <aouledameur@baylibre.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v7 2/4] thermal: mediatek: control buffer enablement tweaks
Date: Fri, 18 Nov 2022 12:04:28 +0100	[thread overview]
Message-ID: <20221018-up-i350-thermal-bringup-v7-2-ebf08ff2eddb@baylibre.com> (raw)
In-Reply-To: <20221018-up-i350-thermal-bringup-v7-0-ebf08ff2eddb@baylibre.com>

From: Markus Schneider-Pargmann <msp@baylibre.com>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/thermal/mtk_thermal.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 8440692e3890..d8ddceb75372 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -271,6 +271,9 @@ struct mtk_thermal_data {
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
 	enum mtk_thermal_version version;
+	u32 apmixed_buffer_ctl_reg;
+	u32 apmixed_buffer_ctl_mask;
+	u32 apmixed_buffer_ctl_set;
 };
 
 struct mtk_thermal {
@@ -514,6 +517,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
 	.version = MTK_THERMAL_V2,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
+	.apmixed_buffer_ctl_set = BIT(0),
 };
 
 /*
@@ -963,14 +969,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+				       void __iomem *apmixed_base)
 {
-	int tmp;
+	u32 tmp;
+
+	if (!mt->conf->apmixed_buffer_ctl_reg)
+		return;
 
-	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-	tmp &= ~(0x37);
-	tmp |= 0x1;
-	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+	tmp &= mt->conf->apmixed_buffer_ctl_mask;
+	tmp |= mt->conf->apmixed_buffer_ctl_set;
+	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
 	udelay(200);
 }
 
@@ -1070,8 +1080,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
 	if (mt->conf->version == MTK_THERMAL_V2) {
-		mtk_thermal_turn_on_buffer(apmixed_base);
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
 	}
 

-- 
b4 0.10.1
