From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org
Cc: Camelia Alexandra Groza <camelia.groza@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Madalin Bucur <madalin.bucur@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings
Date: Tue, 18 Oct 2022 19:11:09 -0400 [thread overview]
Message-ID: <20221018231112.2142074-6-sean.anderson@seco.com> (raw)
In-Reply-To: <20221018231112.2142074-1-sean.anderson@seco.com>
This adds bindings for the SerDes devices. They are disabled by default
to prevent any breakage on existing boards.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
(no changes since v4)
Changes in v4:
- Convert to new bindings
Changes in v3:
- Describe modes in device tree
Changes in v2:
- Use one phy cell for SerDes1, since no lanes can be grouped
- Disable SerDes by default to prevent breaking boards inadvertently.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3d9e29824bb2..8f986b4f5efc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,24 @@ sfp: efuse@1e80000 {
clock-names = "sfp";
};
+ serdes1: serdes@1ea0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1ea0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
+ serdes2: serdes@1eb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1eb0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
--
2.35.1.1320.gc452695387.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org
Cc: Camelia Alexandra Groza <camelia.groza@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Madalin Bucur <madalin.bucur@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings
Date: Tue, 18 Oct 2022 19:11:09 -0400 [thread overview]
Message-ID: <20221018231112.2142074-6-sean.anderson@seco.com> (raw)
In-Reply-To: <20221018231112.2142074-1-sean.anderson@seco.com>
This adds bindings for the SerDes devices. They are disabled by default
to prevent any breakage on existing boards.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
(no changes since v4)
Changes in v4:
- Convert to new bindings
Changes in v3:
- Describe modes in device tree
Changes in v2:
- Use one phy cell for SerDes1, since no lanes can be grouped
- Disable SerDes by default to prevent breaking boards inadvertently.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3d9e29824bb2..8f986b4f5efc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,24 @@ sfp: efuse@1e80000 {
clock-names = "sfp";
};
+ serdes1: serdes@1ea0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1ea0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
+ serdes2: serdes@1eb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1eb0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
--
2.35.1.1320.gc452695387.dirty
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org
Cc: Camelia Alexandra Groza <camelia.groza@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Madalin Bucur <madalin.bucur@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings
Date: Tue, 18 Oct 2022 19:11:09 -0400 [thread overview]
Message-ID: <20221018231112.2142074-6-sean.anderson@seco.com> (raw)
In-Reply-To: <20221018231112.2142074-1-sean.anderson@seco.com>
This adds bindings for the SerDes devices. They are disabled by default
to prevent any breakage on existing boards.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
(no changes since v4)
Changes in v4:
- Convert to new bindings
Changes in v3:
- Describe modes in device tree
Changes in v2:
- Use one phy cell for SerDes1, since no lanes can be grouped
- Disable SerDes by default to prevent breaking boards inadvertently.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3d9e29824bb2..8f986b4f5efc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,24 @@ sfp: efuse@1e80000 {
clock-names = "sfp";
};
+ serdes1: serdes@1ea0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1ea0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
+ serdes2: serdes@1eb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1eb0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
--
2.35.1.1320.gc452695387.dirty
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org
Cc: devicetree@vger.kernel.org, Madalin Bucur <madalin.bucur@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings
Date: Tue, 18 Oct 2022 19:11:09 -0400 [thread overview]
Message-ID: <20221018231112.2142074-6-sean.anderson@seco.com> (raw)
In-Reply-To: <20221018231112.2142074-1-sean.anderson@seco.com>
This adds bindings for the SerDes devices. They are disabled by default
to prevent any breakage on existing boards.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
(no changes since v4)
Changes in v4:
- Convert to new bindings
Changes in v3:
- Describe modes in device tree
Changes in v2:
- Use one phy cell for SerDes1, since no lanes can be grouped
- Disable SerDes by default to prevent breaking boards inadvertently.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3d9e29824bb2..8f986b4f5efc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -423,6 +423,24 @@ sfp: efuse@1e80000 {
clock-names = "sfp";
};
+ serdes1: serdes@1ea0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1ea0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
+ serdes2: serdes@1eb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1046a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1eb0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x1000>;
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2022-10-18 23:11 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-18 23:11 [PATCH v7 0/8] phy: Add support for Lynx 10G SerDes Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 2/8] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-27 21:49 ` Stephen Boyd
2022-10-27 21:49 ` Stephen Boyd
2022-10-27 21:49 ` Stephen Boyd
2022-10-27 21:49 ` Stephen Boyd
2022-10-18 23:11 ` [PATCH v7 4/8] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-19 4:54 ` kernel test robot
2022-10-19 4:54 ` kernel test robot
2022-10-19 4:54 ` kernel test robot
2022-10-20 17:04 ` kernel test robot
2022-10-20 17:04 ` kernel test robot
2022-10-20 17:04 ` kernel test robot
2022-10-18 23:11 ` Sean Anderson [this message]
2022-10-18 23:11 ` [PATCH v7 5/8] arm64: dts: ls1046a: Add serdes bindings Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 6/8] arm64: dts: ls1088a: " Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 7/8] arm64: dts: ls1046ardb: " Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` [PATCH v7 8/8] [WIP] arm64: dts: ls1088ardb: " Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-18 23:11 ` Sean Anderson
2022-10-20 2:44 ` [PATCH v7 0/8] phy: Add support for Lynx 10G SerDes Bagas Sanjaya
2022-10-20 2:44 ` Bagas Sanjaya
2022-10-20 2:44 ` Bagas Sanjaya
2022-10-20 2:44 ` Bagas Sanjaya
2022-10-20 15:32 ` Sean Anderson
2022-10-20 15:32 ` Sean Anderson
2022-10-20 15:32 ` Sean Anderson
2022-10-20 15:32 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221018231112.2142074-6-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=camelia.groza@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.