From: Biju Das <biju.das.jz@bp.renesas.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <chris.paterson2@renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v5 2/5] clocksource/drivers: Add RZ/G2L MTU3 core driver
Date: Thu, 27 Oct 2022 15:48:41 +0100 [thread overview]
Message-ID: <20221027144844.85149-3-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20221027144844.85149-1-biju.das.jz@bp.renesas.com>
Add RZ/G2L MTU3 core driver for the Multi-Function Timer Pulse
Unit 3 (MTU3a) hardware available on SoCs from Renesas. The core
driver allow to share the clk and channel between the other
drivers like PWM, Clock Source, Clock event and Counter.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v4->v5:
* Moved core driver from MFD to timer
* Child devices instatiated using mfd_add_devices()
v3->v4:
* A single driver that registers both the counter and the pwm functionalities
that binds against "renesas,rz-mtu3".
* Moved PM handling from child devices to here.
* replaced include/linux/mfd/rz-mtu3.h->drivers/mfd/rz-mtu3.h
* Removed "remove" callback
v2->v3:
* removed unwanted header files
* Added LUT for 32 bit registers as it needed for 32-bit cascade counting.
* Exported 32 bit read/write functions.
v1->v2:
* Changed the compatible name
* Replaced devm_reset_control_get->devm_reset_control_get_exclusive
* Renamed function names rzg2l_mtu3->rz_mtu3 as this is generic IP
in RZ family SoC's.
---
drivers/clocksource/Kconfig | 10 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/rz-mtu3.c | 440 ++++++++++++++++++++++++++++++++++
include/clocksource/rz-mtu3.h | 206 ++++++++++++++++
4 files changed, 657 insertions(+)
create mode 100644 drivers/clocksource/rz-mtu3.c
create mode 100644 include/clocksource/rz-mtu3.h
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 4469e7f555e9..a5e3359d17ef 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -524,6 +524,16 @@ config SH_TIMER_MTU2
Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
This hardware comes with 16-bit timer registers.
+config RZ_MTU3
+ bool "Renesas RZ/G2L MTU3 core driver"
+ depends on (ARCH_RZG2L && OF) || COMPILE_TEST
+ help
+ Select this option to enable Renesas RZ/G2L MTU3 core driver for
+ the Multi-Function Timer Pulse Unit 3 (MTU3a) hardware available on
+ SoCs from Renesas. The core driver allow to share the clk and channel
+ between the others drivers like PWM, Clock Source, Clock event and
+ Counter.
+
config RENESAS_OSTM
bool "Renesas OSTM timer driver"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 64ab547de97b..9ffb46614d98 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += timer-cs5535.o
obj-$(CONFIG_CLKSRC_JCORE_PIT) += jcore-pit.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
+obj-$(CONFIG_RZ_MTU3) += rz-mtu3.o
obj-$(CONFIG_RENESAS_OSTM) += renesas-ostm.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
diff --git a/drivers/clocksource/rz-mtu3.c b/drivers/clocksource/rz-mtu3.c
new file mode 100644
index 000000000000..72d628e8455a
--- /dev/null
+++ b/drivers/clocksource/rz-mtu3.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 - MTU3a
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+#include <clocksource/rz-mtu3.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+
+static const unsigned long rz_mtu3_8bit_ch_reg_offs[][13] = {
+ {
+ [RZ_MTU3_TIER] = 0x4, [RZ_MTU3_NFCR] = 0x70,
+ [RZ_MTU3_TCR] = 0x0, [RZ_MTU3_TCR2] = 0x28,
+ [RZ_MTU3_TMDR1] = 0x1, [RZ_MTU3_TIORH] = 0x2,
+ [RZ_MTU3_TIORL] = 0x3
+ },
+ {
+ [RZ_MTU3_TIER] = 0x4, [RZ_MTU3_NFCR] = 0xef,
+ [RZ_MTU3_TSR] = 0x5, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0x14, [RZ_MTU3_TMDR1] = 0x1,
+ [RZ_MTU3_TIOR] = 0x2
+ },
+ {
+ [RZ_MTU3_TIER] = 0x4, [RZ_MTU3_NFCR] = 0x16e,
+ [RZ_MTU3_TSR] = 0x5, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0xc, [RZ_MTU3_TMDR1] = 0x1,
+ [RZ_MTU3_TIOR] = 0x2
+ },
+ {
+ [RZ_MTU3_TIER] = 0x8, [RZ_MTU3_NFCR] = 0x93,
+ [RZ_MTU3_TSR] = 0x2c, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0x4c, [RZ_MTU3_TMDR1] = 0x2,
+ [RZ_MTU3_TIORH] = 0x4, [RZ_MTU3_TIORL] = 0x5,
+ [RZ_MTU3_TBTM] = 0x38
+ },
+ {
+ [RZ_MTU3_TIER] = 0x8, [RZ_MTU3_NFCR] = 0x93,
+ [RZ_MTU3_TSR] = 0x2c, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0x4c, [RZ_MTU3_TMDR1] = 0x2,
+ [RZ_MTU3_TIORH] = 0x5, [RZ_MTU3_TIORL] = 0x6,
+ [RZ_MTU3_TBTM] = 0x38
+ },
+ {
+ [RZ_MTU3_TIER] = 0x32, [RZ_MTU3_NFCR] = 0x1eb,
+ [RZ_MTU3_TSTR] = 0x34, [RZ_MTU3_TCNTCMPCLR] = 0x36,
+ [RZ_MTU3_TCRU] = 0x4, [RZ_MTU3_TCR2U] = 0x5,
+ [RZ_MTU3_TIORU] = 0x6, [RZ_MTU3_TCRV] = 0x14,
+ [RZ_MTU3_TCR2V] = 0x15, [RZ_MTU3_TIORV] = 0x16,
+ [RZ_MTU3_TCRW] = 0x24, [RZ_MTU3_TCR2W] = 0x25,
+ [RZ_MTU3_TIORW] = 0x26
+ },
+ {
+ [RZ_MTU3_TIER] = 0x8, [RZ_MTU3_NFCR] = 0x93,
+ [RZ_MTU3_TSR] = 0x2c, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0x4c, [RZ_MTU3_TMDR1] = 0x2,
+ [RZ_MTU3_TIORH] = 0x4, [RZ_MTU3_TIORL] = 0x5,
+ [RZ_MTU3_TBTM] = 0x38
+ },
+ {
+ [RZ_MTU3_TIER] = 0x8, [RZ_MTU3_NFCR] = 0x93,
+ [RZ_MTU3_TSR] = 0x2c, [RZ_MTU3_TCR] = 0x0,
+ [RZ_MTU3_TCR2] = 0x4c, [RZ_MTU3_TMDR1] = 0x2,
+ [RZ_MTU3_TIORH] = 0x5, [RZ_MTU3_TIORL] = 0x6,
+ [RZ_MTU3_TBTM] = 0x38
+ },
+ {
+ [RZ_MTU3_TIER] = 0x4, [RZ_MTU3_NFCR] = 0x368,
+ [RZ_MTU3_TCR] = 0x0, [RZ_MTU3_TCR2] = 0x6,
+ [RZ_MTU3_TMDR1] = 0x1, [RZ_MTU3_TIORH] = 0x2,
+ [RZ_MTU3_TIORL] = 0x3
+ }
+};
+
+static const unsigned long rz_mtu3_16bit_ch_reg_offs[][12] = {
+ {
+ [RZ_MTU3_TCNT] = 0x6, [RZ_MTU3_TGRA] = 0x8,
+ [RZ_MTU3_TGRB] = 0xa, [RZ_MTU3_TGRC] = 0xc,
+ [RZ_MTU3_TGRD] = 0xe, [RZ_MTU3_TGRE] = 0x20,
+ [RZ_MTU3_TGRF] = 0x22
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x6, [RZ_MTU3_TGRA] = 0x8,
+ [RZ_MTU3_TGRB] = 0xa
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x6, [RZ_MTU3_TGRA] = 0x8,
+ [RZ_MTU3_TGRB] = 0xa
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x10, [RZ_MTU3_TGRA] = 0x18,
+ [RZ_MTU3_TGRB] = 0x1a, [RZ_MTU3_TGRC] = 0x24,
+ [RZ_MTU3_TGRD] = 0x26, [RZ_MTU3_TGRE] = 0x72
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x11, [RZ_MTU3_TGRA] = 0x1b,
+ [RZ_MTU3_TGRB] = 0x1d, [RZ_MTU3_TGRC] = 0x27,
+ [RZ_MTU3_TGRD] = 0x29, [RZ_MTU3_TGRE] = 0x73,
+ [RZ_MTU3_TGRF] = 0x75, [RZ_MTU3_TADCR] = 0x3f,
+ [RZ_MTU3_TADCORA] = 0x43, [RZ_MTU3_TADCORB] = 0x45,
+ [RZ_MTU3_TADCOBRA] = 0x47,
+ [RZ_MTU3_TADCOBRB] = 0x49
+ },
+ {
+ [RZ_MTU3_TCNTU] = 0x0, [RZ_MTU3_TGRU] = 0x2,
+ [RZ_MTU3_TCNTV] = 0x10, [RZ_MTU3_TGRV] = 0x12,
+ [RZ_MTU3_TCNTW] = 0x20, [RZ_MTU3_TGRW] = 0x22
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x10, [RZ_MTU3_TGRA] = 0x18,
+ [RZ_MTU3_TGRB] = 0x1a, [RZ_MTU3_TGRC] = 0x24,
+ [RZ_MTU3_TGRD] = 0x26, [RZ_MTU3_TGRE] = 0x72
+ },
+ {
+ [RZ_MTU3_TCNT] = 0x11, [RZ_MTU3_TGRA] = 0x1b,
+ [RZ_MTU3_TGRB] = 0x1d, [RZ_MTU3_TGRC] = 0x27,
+ [RZ_MTU3_TGRD] = 0x29, [RZ_MTU3_TGRE] = 0x73,
+ [RZ_MTU3_TGRF] = 0x75, [RZ_MTU3_TADCR] = 0x3f,
+ [RZ_MTU3_TADCORA] = 0x43, [RZ_MTU3_TADCORB] = 0x45,
+ [RZ_MTU3_TADCOBRA] = 0x47,
+ [RZ_MTU3_TADCOBRB] = 0x49
+ },
+};
+
+static const unsigned long rz_mtu3_32bit_ch_reg_offs[][5] = {
+ {
+ [RZ_MTU3_TCNTLW] = 0x20, [RZ_MTU3_TGRALW] = 0x24,
+ [RZ_MTU3_TGRBLW] = 0x28
+ },
+ { [RZ_MTU3_TCNT] = 0x8, [RZ_MTU3_TGRA] = 0xc,
+ [RZ_MTU3_TGRB] = 0x10, [RZ_MTU3_TGRC] = 0x14,
+ [RZ_MTU3_TGRD] = 0x18
+ }
+};
+
+static bool rz_mtu3_is_16bit_shared_reg(u16 off)
+{
+ return (off == RZ_MTU3_TDDRA || off == RZ_MTU3_TDDRB ||
+ off == RZ_MTU3_TCDRA || off == RZ_MTU3_TCDRB ||
+ off == RZ_MTU3_TCBRA || off == RZ_MTU3_TCBRB ||
+ off == RZ_MTU3_TCNTSA || off == RZ_MTU3_TCNTSB);
+}
+
+u16 rz_mtu3_shared_reg_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ struct rz_mtu3 *mtu = dev_get_drvdata(ch->dev->parent);
+
+ if (rz_mtu3_is_16bit_shared_reg(off))
+ return readw(mtu->mmio + off);
+ else
+ return readb(mtu->mmio + off);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_shared_reg_read);
+
+u8 rz_mtu3_8bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ u16 ch_offs;
+
+ ch_offs = rz_mtu3_8bit_ch_reg_offs[ch->index][off];
+ if (off != RZ_MTU3_TCR && ch_offs == 0)
+ return -EINVAL;
+
+ /*
+ * NFCR register addresses on MTU{0,1,2,5,8} channels are smaller than
+ * channel's base address.
+ */
+ if (off == RZ_MTU3_NFCR && (ch->index <= RZ_MTU2 ||
+ ch->index == RZ_MTU5 ||
+ ch->index == RZ_MTU8))
+ return readb(ch->base - ch_offs);
+ else
+ return readb(ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_8bit_ch_read);
+
+u16 rz_mtu3_16bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ u16 ch_offs;
+
+ /* MTU8 doesn't have 16-bit registers */
+ if (ch->index == RZ_MTU8)
+ return 0;
+
+ ch_offs = rz_mtu3_16bit_ch_reg_offs[ch->index][off];
+ if (ch->index != RZ_MTU5 && off != RZ_MTU3_TCNTU && ch_offs == 0)
+ return 0;
+
+ return readw(ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_16bit_ch_read);
+
+u32 rz_mtu3_32bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ u16 ch_offs;
+
+ if (ch->index == RZ_MTU1)
+ ch_offs = rz_mtu3_32bit_ch_reg_offs[0][off];
+ else if (ch->index == RZ_MTU8)
+ ch_offs = rz_mtu3_32bit_ch_reg_offs[1][off];
+
+ if (!ch_offs)
+ return -EINVAL;
+
+ return readl(ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_32bit_ch_read);
+
+void rz_mtu3_8bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u8 val)
+{
+ u16 ch_offs;
+
+ ch_offs = rz_mtu3_8bit_ch_reg_offs[ch->index][off];
+ if (ch->index != RZ_MTU5 && off != RZ_MTU3_TCR && ch_offs == 0)
+ return;
+
+ /*
+ * NFCR register addresses on MTU{0,1,2,5,8} channels are smaller than
+ * channel's base address.
+ */
+ if (off == RZ_MTU3_NFCR && (ch->index <= RZ_MTU2 ||
+ ch->index == RZ_MTU5 ||
+ ch->index == RZ_MTU8))
+ writeb(val, ch->base - ch_offs);
+ else
+ writeb(val, ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_8bit_ch_write);
+
+void rz_mtu3_16bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
+{
+ u16 ch_offs;
+
+ /* MTU8 doesn't have 16-bit registers */
+ if (ch->index == RZ_MTU8)
+ return;
+
+ ch_offs = rz_mtu3_16bit_ch_reg_offs[ch->index][off];
+ if (ch->index != RZ_MTU5 && off != RZ_MTU3_TCNTU && ch_offs == 0)
+ return;
+
+ writew(val, ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_16bit_ch_write);
+
+void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val)
+{
+ u16 ch_offs;
+
+ if (ch->index == RZ_MTU1)
+ ch_offs = rz_mtu3_32bit_ch_reg_offs[0][off];
+ else if (ch->index == RZ_MTU8)
+ ch_offs = rz_mtu3_32bit_ch_reg_offs[1][off];
+
+ if (!ch_offs)
+ return;
+
+ writel(val, ch->base + ch_offs);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_32bit_ch_write);
+
+void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 value)
+{
+ struct rz_mtu3 *mtu = dev_get_drvdata(ch->dev->parent);
+
+ if (rz_mtu3_is_16bit_shared_reg(off))
+ writew(value, mtu->mmio + off);
+ else
+ writeb((u8)value, mtu->mmio + off);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_shared_reg_write);
+
+static void rz_mtu3_start_stop_ch(struct rz_mtu3_channel *ch, bool start)
+{
+ struct rz_mtu3 *mtu = dev_get_drvdata(ch->dev->parent);
+ unsigned long flags, value;
+ u8 offs;
+
+ /* start stop register shared by multiple timer channels */
+ raw_spin_lock_irqsave(&mtu->lock, flags);
+
+ if (ch->index == RZ_MTU6 || ch->index == RZ_MTU7) {
+ value = rz_mtu3_shared_reg_read(ch, RZ_MTU3_TSTRB);
+ if (start)
+ value |= 1 << ch->index;
+ else
+ value &= ~(1 << ch->index);
+ rz_mtu3_shared_reg_write(ch, RZ_MTU3_TSTRB, value);
+ } else if (ch->index != RZ_MTU5) {
+ value = rz_mtu3_shared_reg_read(ch, RZ_MTU3_TSTRA);
+ if (ch->index == RZ_MTU8)
+ offs = 0x08;
+ else if (ch->index < RZ_MTU3)
+ offs = 1 << ch->index;
+ else
+ offs = 1 << (ch->index + 3);
+ if (start)
+ value |= offs;
+ else
+ value &= ~offs;
+ rz_mtu3_shared_reg_write(ch, RZ_MTU3_TSTRA, value);
+ }
+
+ raw_spin_unlock_irqrestore(&mtu->lock, flags);
+}
+
+bool rz_mtu3_is_enabled(struct rz_mtu3_channel *ch)
+{
+ struct rz_mtu3 *mtu = dev_get_drvdata(ch->dev->parent);
+ unsigned long flags, value;
+ bool ret = false;
+ u8 offs;
+
+ /* start stop register shared by multiple timer channels */
+ raw_spin_lock_irqsave(&mtu->lock, flags);
+
+ if (ch->index == RZ_MTU6 || ch->index == RZ_MTU7) {
+ value = rz_mtu3_shared_reg_read(ch, RZ_MTU3_TSTRB);
+ ret = value & (1 << ch->index);
+ } else if (ch->index != RZ_MTU5) {
+ value = rz_mtu3_shared_reg_read(ch, RZ_MTU3_TSTRA);
+ if (ch->index == RZ_MTU8)
+ offs = 0x08;
+ else if (ch->index < RZ_MTU3)
+ offs = 1 << ch->index;
+ else
+ offs = 1 << (ch->index + 3);
+
+ ret = value & offs;
+ }
+
+ raw_spin_unlock_irqrestore(&mtu->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_is_enabled);
+
+int rz_mtu3_enable(struct rz_mtu3_channel *ch)
+{
+ /* enable channel */
+ rz_mtu3_start_stop_ch(ch, true);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_enable);
+
+void rz_mtu3_disable(struct rz_mtu3_channel *ch)
+{
+ /* disable channel */
+ rz_mtu3_start_stop_ch(ch, false);
+}
+EXPORT_SYMBOL_GPL(rz_mtu3_disable);
+
+static const unsigned int ch_reg_offsets[] = {
+ 0x100, 0x180, 0x200, 0x000, 0x001, 0xa80, 0x800, 0x801, 0x400
+};
+
+static void rz_mtu3_reset_assert(void *data)
+{
+ struct rz_mtu3 *mtu = dev_get_drvdata(data);
+
+ mfd_remove_devices(data);
+ reset_control_assert(mtu->rstc);
+}
+
+static const struct mfd_cell rz_mtu3_devs[] = {
+ {
+ .name = "rz-mtu3-counter",
+ },
+ {
+ .name = "pwm-rz-mtu3",
+ },
+};
+
+static int rz_mtu3_probe(struct platform_device *pdev)
+{
+ struct rz_mtu3 *ddata;
+ unsigned int i;
+ int ret;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ddata->mmio))
+ return PTR_ERR(ddata->mmio);
+
+ ddata->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(ddata->rstc))
+ return PTR_ERR(ddata->rstc);
+
+ ret = devm_add_action_or_reset(&pdev->dev, rz_mtu3_reset_assert,
+ &pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ ddata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ddata->clk))
+ return PTR_ERR(ddata->clk);
+
+ reset_control_deassert(ddata->rstc);
+
+ for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
+ ddata->channels[i].index = i;
+ ddata->channels[i].function = RZ_MTU3_NORMAL;
+ ddata->channels[i].base = ddata->mmio + ch_reg_offsets[i];
+ }
+
+ raw_spin_lock_init(&ddata->lock);
+ platform_set_drvdata(pdev, ddata);
+
+ ret = mfd_add_devices(&pdev->dev, 0, rz_mtu3_devs,
+ ARRAY_SIZE(rz_mtu3_devs), NULL, 0, NULL);
+
+ return ret;
+}
+
+static const struct of_device_id rz_mtu3_of_match[] = {
+ { .compatible = "renesas,rz-mtu3", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rz_mtu3_of_match);
+
+static struct platform_driver rz_mtu3_driver = {
+ .probe = rz_mtu3_probe,
+ .driver = {
+ .name = "rz-mtu3",
+ .of_match_table = rz_mtu3_of_match,
+ },
+};
+module_platform_driver(rz_mtu3_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/G2L MTU3 Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/clocksource/rz-mtu3.h b/include/clocksource/rz-mtu3.h
new file mode 100644
index 000000000000..a9ab470499e7
--- /dev/null
+++ b/include/clocksource/rz-mtu3.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+#ifndef __LINUX_RZ_MTU3_H__
+#define __LINUX_RZ_MTU3_H__
+
+#include <linux/clk.h>
+
+/* 8-bit shared register offsets macros */
+#define RZ_MTU3_TSTRA 0x080 /* Timer start register A */
+#define RZ_MTU3_TSTRB 0x880 /* Timer start register B */
+
+/* 16-bit shared register offset macros */
+#define RZ_MTU3_TDDRA 0x016 /* Timer dead time data register A */
+#define RZ_MTU3_TDDRB 0x816 /* Timer dead time data register B */
+#define RZ_MTU3_TCDRA 0x014 /* Timer cycle data register A */
+#define RZ_MTU3_TCDRB 0x814 /* Timer cycle data register B */
+#define RZ_MTU3_TCBRA 0x022 /* Timer cycle buffer register A */
+#define RZ_MTU3_TCBRB 0x822 /* Timer cycle buffer register B */
+#define RZ_MTU3_TCNTSA 0x020 /* Timer subcounter A */
+#define RZ_MTU3_TCNTSB 0x820 /* Timer subcounter B */
+
+/*
+ * MTU5 contains 3 timer counter registers and is totaly different
+ * from other channels, so we must separate its offset
+ */
+
+/* 8-bit register offset macros of MTU3 channels except MTU5 */
+#define RZ_MTU3_TIER 0 /* Timer interrupt register */
+#define RZ_MTU3_NFCR 1 /* Noise filter control register */
+#define RZ_MTU3_TSR 2 /* Timer status register */
+#define RZ_MTU3_TCR 3 /* Timer control register */
+#define RZ_MTU3_TCR2 4 /* Timer control register 2 */
+#define RZ_MTU3_TMDR1 5 /* Timer mode register 1 */
+#define RZ_MTU3_TIOR 6 /* Timer I/O control register */
+#define RZ_MTU3_TIORH 6 /* Timer I/O control register H */
+#define RZ_MTU3_TIORL 7 /* Timer I/O control register L */
+/* Only MTU3/4/6/7 have TBTM registers */
+#define RZ_MTU3_TBTM 8 /* Timer buffer operation transfer mode register */
+
+/* 8-bit MTU5 register offset macros */
+#define RZ_MTU3_TSTR 2 /* MTU5 Timer start register */
+#define RZ_MTU3_TCNTCMPCLR 3 /* MTU5 Timer compare match clear register */
+#define RZ_MTU3_TCRU 4 /* Timer control register U */
+#define RZ_MTU3_TCR2U 5 /* Timer control register 2U */
+#define RZ_MTU3_TIORU 6 /* Timer I/O control register U */
+#define RZ_MTU3_TCRV 7 /* Timer control register V */
+#define RZ_MTU3_TCR2V 8 /* Timer control register 2V */
+#define RZ_MTU3_TIORV 9 /* Timer I/O control register V */
+#define RZ_MTU3_TCRW 10 /* Timer control register W */
+#define RZ_MTU3_TCR2W 11 /* Timer control register 2W */
+#define RZ_MTU3_TIORW 12 /* Timer I/O control register W */
+
+/* 16-bit register offset macros of MTU3 channels except MTU5 */
+#define RZ_MTU3_TCNT 0 /* Timer counter */
+#define RZ_MTU3_TGRA 1 /* Timer general register A */
+#define RZ_MTU3_TGRB 2 /* Timer general register B */
+#define RZ_MTU3_TGRC 3 /* Timer general register C */
+#define RZ_MTU3_TGRD 4 /* Timer general register D */
+#define RZ_MTU3_TGRE 5 /* Timer general register E */
+#define RZ_MTU3_TGRF 6 /* Timer general register F */
+/* Timer A/D converter start request registers */
+#define RZ_MTU3_TADCR 7 /* control register */
+#define RZ_MTU3_TADCORA 8 /* cycle set register A */
+#define RZ_MTU3_TADCORB 9 /* cycle set register B */
+#define RZ_MTU3_TADCOBRA 10 /* cycle set buffer register A */
+#define RZ_MTU3_TADCOBRB 11 /* cycle set buffer register B */
+
+/* 16-bit MTU5 register offset macros */
+#define RZ_MTU3_TCNTU 0 /* MTU5 Timer counter U */
+#define RZ_MTU3_TGRU 1 /* MTU5 Timer general register U */
+#define RZ_MTU3_TCNTV 2 /* MTU5 Timer counter V */
+#define RZ_MTU3_TGRV 3 /* MTU5 Timer general register V */
+#define RZ_MTU3_TCNTW 4 /* MTU5 Timer counter W */
+#define RZ_MTU3_TGRW 5 /* MTU5 Timer general register W */
+
+/* 32-bit register offset */
+#define RZ_MTU3_TCNTLW 0 /* Timer longword counter */
+#define RZ_MTU3_TGRALW 1 /* Timer longword general register A */
+#define RZ_MTU3_TGRBLW 2 /* Timer longowrd general register B */
+
+#define RZ_MTU3_TMDR3 0x191 /* MTU1 Timer Mode Register 3 */
+
+/* Macros for setting registers */
+#define RZ_MTU3_TCR_CCLR_TGRA BIT(5)
+
+enum rz_mtu3_channels {
+ RZ_MTU0,
+ RZ_MTU1,
+ RZ_MTU2,
+ RZ_MTU3,
+ RZ_MTU4,
+ RZ_MTU5,
+ RZ_MTU6,
+ RZ_MTU7,
+ RZ_MTU8,
+ RZ_MTU_NUM_CHANNELS
+};
+
+enum rz_mtu3_functions {
+ RZ_MTU3_NORMAL,
+ RZ_MTU3_16BIT_PHASE_COUNTING,
+ RZ_MTU3_32BIT_PHASE_COUNTING,
+ RZ_MTU3_PWM_MODE_1,
+};
+
+/**
+ * struct rz_mtu3_channel - MTU3 channel private data
+ *
+ * @dev: device handle
+ * @index: channel index
+ * @base: channel base address
+ * @function: channel function
+ */
+struct rz_mtu3_channel {
+ struct device *dev;
+ unsigned int index;
+ void __iomem *base;
+ enum rz_mtu3_functions function;
+};
+
+/**
+ * struct rz_mtu3 - MTU3 MFD private data
+ *
+ * @clk: MTU3 module clock
+ * @mmio: MTU3 module clock
+ * @lock: Lock to protect shared register access
+ * @rz_mtu3_channel: HW channels
+ */
+struct rz_mtu3 {
+ void *priv_rz_mtu3;
+ void __iomem *mmio;
+ struct clk *clk;
+ struct reset_control *rstc;
+ raw_spinlock_t lock; /* Protect the shared registers */
+ struct rz_mtu3_channel channels[RZ_MTU_NUM_CHANNELS];
+};
+
+#if IS_ENABLED(CONFIG_RZ_MTU3)
+bool rz_mtu3_is_enabled(struct rz_mtu3_channel *ch);
+void rz_mtu3_disable(struct rz_mtu3_channel *ch);
+int rz_mtu3_enable(struct rz_mtu3_channel *ch);
+
+u8 rz_mtu3_8bit_ch_read(struct rz_mtu3_channel *ch, u16 off);
+u16 rz_mtu3_16bit_ch_read(struct rz_mtu3_channel *ch, u16 off);
+u32 rz_mtu3_32bit_ch_read(struct rz_mtu3_channel *ch, u16 off);
+u16 rz_mtu3_shared_reg_read(struct rz_mtu3_channel *ch, u16 off);
+
+void rz_mtu3_8bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u8 val);
+void rz_mtu3_16bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u16 val);
+void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val);
+void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val);
+#else
+static inline bool rz_mtu3_is_enabled(struct rz_mtu3_channel *ch)
+{
+ return false;
+}
+
+static inline void rz_mtu3_disable(struct rz_mtu3_channel *ch)
+{
+}
+
+static inline int rz_mtu3_enable(struct rz_mtu3_channel *ch)
+{
+ return 0;
+}
+
+static inline u8 rz_mtu3_8bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ return 0;
+}
+
+static inline u16 rz_mtu3_16bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ return 0;
+}
+
+static inline u32 rz_mtu3_32bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ return 0;
+}
+
+static inline u16 rz_mtu3_shared_reg_read(struct rz_mtu3_channel *ch, u16 off)
+{
+ return 0;
+}
+
+static inline void rz_mtu3_8bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u8 val)
+{
+}
+
+static inline void rz_mtu3_16bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
+{
+}
+
+static inline void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val)
+{
+}
+
+static inline void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
+{
+}
+#endif
+
+#endif /* __LINUX_RZ_MTU3_H__ */
--
2.25.1
next prev parent reply other threads:[~2022-10-27 14:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-27 14:48 [PATCH v5 0/5] Add RZ/G2L MTU3 Core, Counter and pwm driver Biju Das
2022-10-27 14:48 ` [PATCH v5 1/5] dt-bindings: timer: Document RZ/G2L MTU3a bindings Biju Das
2022-10-27 22:12 ` Krzysztof Kozlowski
2022-10-30 13:30 ` Rob Herring
2022-10-27 14:48 ` Biju Das [this message]
2022-11-07 14:16 ` [PATCH v5 2/5] clocksource/drivers: Add RZ/G2L MTU3 core driver Geert Uytterhoeven
2022-11-07 14:27 ` Biju Das
2022-11-11 6:53 ` Biju Das
2022-10-27 14:48 ` [PATCH v5 3/5] Documentation: ABI: sysfs-bus-counter: add external_input_phase_clock_select & long_word_access_ctrl_mode items Biju Das
2022-10-27 14:48 ` [PATCH v5 4/5] counter: Add RZ/G2L MTU3 counter driver Biju Das
2022-10-27 14:48 ` [PATCH v5 5/5] pwm: Add support for RZ/G2L MTU3 PWM driver Biju Das
2022-11-07 6:55 ` [PATCH v5 0/5] Add RZ/G2L MTU3 Core, Counter and pwm driver Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221027144844.85149-3-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=chris.paterson2@renesas.com \
--cc=daniel.lezcano@linaro.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.