From: Marijn Suijten <marijn.suijten@somainline.org>
To: phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Martin Botka <martin.botka@somainline.org>,
Jami Kettunen <jami.kettunen@somainline.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Luca Weiss <luca@z3ntu.xyz>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 06/10] arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulators
Date: Sun, 30 Oct 2022 08:32:28 +0100 [thread overview]
Message-ID: <20221030073232.22726-7-marijn.suijten@somainline.org> (raw)
In-Reply-To: <20221030073232.22726-1-marijn.suijten@somainline.org>
This regulator configuration was adopted from downstream, and is
identical to the sm7225 FairPhone 4 configuration bar pm6350_l8a.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
.../qcom/sm6350-sony-xperia-lena-pdx213.dts | 218 ++++++++++++++++++
1 file changed, 218 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 4512b0bf7fe1..1aaa9612b061 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm6350.dtsi"
#include "pm6350.dtsi"
@@ -44,6 +45,223 @@ key-volume-down {
};
};
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm6350-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ pm6350_s1: smps1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_s2: smps2 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <2048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l2: ldo2 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l3: ldo3 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l4: ldo4 {
+ regulator-min-microvolt = <352000>;
+ regulator-max-microvolt = <801000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l5: ldo5 {
+ regulator-min-microvolt = <1503000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l6: ldo6 {
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l7: ldo7 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l8: ldo8 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l9: ldo9 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l11: ldo11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l12: ldo12 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l13: ldo13 {
+ regulator-min-microvolt = <570000>;
+ regulator-max-microvolt = <650000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l14: ldo14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l15: ldo15 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l16: ldo16 {
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <921000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l18: ldo18 {
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1049000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l19: ldo19 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l20: ldo20 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <801000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l21: ldo21 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <825000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6350_l22: ldo22 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ pm6150l_s8: smps8 {
+ regulator-min-microvolt = <313000>;
+ regulator-max-microvolt = <1395000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l1: ldo1 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l2: ldo2 {
+ regulator-min-microvolt = <1170000>;
+ regulator-max-microvolt = <1305000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l3: ldo3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1299000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l4: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l5: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l6: ldo6 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l7: ldo7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l8: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l9: ldo9 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l10: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_l11: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3401000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm6150l_bob: bob {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <5492000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+};
+
&pm6350_gpios {
gpio_keys_state: gpio-keys-state {
key-volume-down-pins {
--
2.38.1
next prev parent reply other threads:[~2022-10-30 7:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-30 7:32 [PATCH 00/10] arm64: dts: qcom: sm6350: SD Card fixes, pm6350 keys and touchscreen for PDX213 Marijn Suijten
2022-10-30 7:32 ` [PATCH 01/10] arm64: dts: qcom: sm6350: Add resets for SDHCI 1/2 Marijn Suijten
2022-10-31 8:55 ` Luca Weiss
2022-10-31 21:12 ` Konrad Dybcio
2022-10-30 7:32 ` [PATCH 02/10] arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2 Marijn Suijten
2022-10-31 8:56 ` Luca Weiss
2022-10-31 21:12 ` Konrad Dybcio
2022-11-02 20:45 ` Krzysztof Kozlowski
2022-10-30 7:32 ` [PATCH 03/10] arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off pinctrl Marijn Suijten
2022-10-31 21:12 ` Konrad Dybcio
2022-11-02 20:45 ` Krzysztof Kozlowski
2022-10-30 7:32 ` [PATCH 04/10] arm64: dts: qcom: pm6350: Include header for KEY_POWER Marijn Suijten
2022-10-31 8:57 ` Luca Weiss
2022-10-31 21:12 ` Konrad Dybcio
2022-10-30 7:32 ` [PATCH 05/10] arm64: dts: qcom: sm6350-lena: Include pm6350 and configure buttons Marijn Suijten
2022-10-31 21:13 ` Konrad Dybcio
2022-10-30 7:32 ` Marijn Suijten [this message]
2022-10-31 21:13 ` [PATCH 06/10] arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulators Konrad Dybcio
2022-10-30 7:32 ` [PATCH 07/10] arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) Marijn Suijten
2022-10-31 21:14 ` Konrad Dybcio
2022-10-30 7:32 ` [PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA Marijn Suijten
2022-10-31 21:14 ` Konrad Dybcio
2022-10-30 7:32 ` [PATCH 09/10] arm64: dts: qcom: sm6350-lena: Configure Samsung touchscreen Marijn Suijten
2022-10-31 21:14 ` Konrad Dybcio
2022-10-30 7:32 ` [PATCH 10/10] arm64: dts: qcom: sm6350: Add apps_smmu with streamID to SDHCI 1/2 nodes Marijn Suijten
2022-10-31 8:58 ` Luca Weiss
2022-10-31 21:15 ` Konrad Dybcio
2022-11-08 1:27 ` [PATCH 00/10] arm64: dts: qcom: sm6350: SD Card fixes, pm6350 keys and touchscreen for PDX213 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221030073232.22726-7-marijn.suijten@somainline.org \
--to=marijn.suijten@somainline.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=devicetree@vger.kernel.org \
--cc=jami.kettunen@somainline.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=martin.botka@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.