Re: [PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA

From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: Marijn Suijten <marijn.suijten@somainline.org>,
	phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@somainline.org>,
	Martin Botka <martin.botka@somainline.org>,
	Jami Kettunen <jami.kettunen@somainline.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Luca Weiss <luca@z3ntu.xyz>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA
Date: Mon, 31 Oct 2022 22:14:31 +0100	[thread overview]
Message-ID: <a9fdf7ef-f0f7-6595-d7ae-d3dc6ec1dc1e@somainline.org> (raw)
In-Reply-To: <20221030073232.22726-9-marijn.suijten@somainline.org>


On 30.10.2022 08:32, Marijn Suijten wrote:
> Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes
> later.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts  | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 5cb76026ef67..6eb1d4e5e60f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -272,6 +272,14 @@ pm6150l_bob: bob {
>  	};
>  };
>  
> +&gpi_dma0 {
> +	status = "okay";
> +};
> +
> +&gpi_dma1 {
> +	status = "okay";
> +};
> +
>  &pm6350_gpios {
>  	gpio_keys_state: gpio-keys-state {
>  		key-volume-down-pins {
> @@ -289,6 +297,14 @@ &pm6350_resin {
>  	status = "okay";
>  };
>  
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&qupv3_id_1 {
> +	status = "okay";
> +};
> +
>  &sdc2_off_state {
>  	sd-cd-pins {
>  		pins = "gpio94";