All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Ranostay <mranostay@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v5 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
Date: Wed, 2 Nov 2022 21:41:24 -0700	[thread overview]
Message-ID: <20221103044125.172864-8-mranostay@ti.com> (raw)
In-Reply-To: <20221103044125.172864-1-mranostay@ti.com>

From: Aswath Govindraju <a-govindraju@ti.com>

Add PCIe device tree node (both RC and EP) for the single PCIe
instance present in j721s2.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 61 ++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 6f9ccf52363e..0edf6c001289 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -821,6 +821,67 @@ serdes0: serdes@5060000 {
 		};
 	};
 
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb013>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */
+				<0 0 0 2 &pcie1_intc 0>, /* INT B */
+				<0 0 0 3 &pcie1_intc 0>, /* INT C */
+				<0 0 0 4 &pcie1_intc 0>; /* INT D */
+
+		pcie1_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
 	main_mcan0: can@2701000 {
 		compatible = "bosch,m_can";
 		reg = <0x00 0x02701000 0x00 0x200>,
-- 
2.38.GIT


WARNING: multiple messages have this Message-ID (diff)
From: Matt Ranostay <mranostay@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v5 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
Date: Wed, 2 Nov 2022 21:41:24 -0700	[thread overview]
Message-ID: <20221103044125.172864-8-mranostay@ti.com> (raw)
In-Reply-To: <20221103044125.172864-1-mranostay@ti.com>

From: Aswath Govindraju <a-govindraju@ti.com>

Add PCIe device tree node (both RC and EP) for the single PCIe
instance present in j721s2.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 61 ++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 6f9ccf52363e..0edf6c001289 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -821,6 +821,67 @@ serdes0: serdes@5060000 {
 		};
 	};
 
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb013>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */
+				<0 0 0 2 &pcie1_intc 0>, /* INT B */
+				<0 0 0 3 &pcie1_intc 0>, /* INT C */
+				<0 0 0 4 &pcie1_intc 0>; /* INT D */
+
+		pcie1_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
 	main_mcan0: can@2701000 {
 		compatible = "bosch,m_can";
 		reg = <0x00 0x02701000 0x00 0x200>,
-- 
2.38.GIT


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-11-03  4:42 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-03  4:41 [PATCH v5 0/8] J721S2: Add support for additional IPs Matt Ranostay
2022-11-03  4:41 ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:53   ` Ravi Gunasekaran
2022-11-16  8:53     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:58   ` Ravi Gunasekaran
2022-11-16  8:58     ` Ravi Gunasekaran
2022-11-18  9:58     ` Matt Ranostay
2022-11-18  9:58       ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:33   ` Vaishnav Achath
2022-11-16  8:33     ` Vaishnav Achath
2022-11-18 10:01     ` Matt Ranostay
2022-11-18 10:01       ` Matt Ranostay
2022-11-03  4:41 ` [PATCH v5 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:54   ` Ravi Gunasekaran
2022-11-16  8:54     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:55   ` Ravi Gunasekaran
2022-11-16  8:55     ` Ravi Gunasekaran
2022-11-03  4:41 ` [PATCH v5 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16  8:36   ` Vaishnav Achath
2022-11-16  8:36     ` Vaishnav Achath
2022-11-03  4:41 ` Matt Ranostay [this message]
2022-11-03  4:41   ` [PATCH v5 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay
2022-11-16 10:25   ` Siddharth Vadapalli
2022-11-16 10:25     ` Siddharth Vadapalli
2022-11-03  4:41 ` [PATCH v5 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay
2022-11-03  4:41   ` Matt Ranostay
2022-11-16 10:26   ` Siddharth Vadapalli
2022-11-16 10:26     ` Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221103044125.172864-8-mranostay@ti.com \
    --to=mranostay@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.