From: Alexandre Mergnat <amergnat@baylibre.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Qii Wang <qii.wang@mediatek.com>, Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, devicetree@vger.kernel.org, Alexandre Mergnat <amergnat@baylibre.com>, Fabien Parent <fparent@baylibre.com>, Rob Herring <robh@kernel.org>, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Subject: [PATCH v4 1/2] arm64: dts: mediatek: add i2c support for mt8365 SoC Date: Tue, 07 Mar 2023 13:41:07 +0100 [thread overview] Message-ID: <20221122-mt8365-i2c-support-v4-1-885ad3301d5a@baylibre.com> (raw) In-Reply-To: <20221122-mt8365-i2c-support-v4-0-885ad3301d5a@baylibre.com> There are four I2C master channels in MT8365 with a same HW architecture. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365.dtsi | 48 ++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 15ac4c1f0966..b70f4d256f63 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -282,6 +282,42 @@ pwm: pwm@11006000 { clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi: spi@1100a000 { compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi"; reg = <0 0x1100a000 0 0x100>; @@ -295,6 +331,18 @@ spi: spi@1100a000 { status = "disabled"; }; + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + ssusb: usb@11201000 { compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3"; reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; -- b4 0.10.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Mergnat <amergnat@baylibre.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Qii Wang <qii.wang@mediatek.com>, Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, devicetree@vger.kernel.org, Alexandre Mergnat <amergnat@baylibre.com>, Fabien Parent <fparent@baylibre.com>, Rob Herring <robh@kernel.org>, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Subject: [PATCH v4 1/2] arm64: dts: mediatek: add i2c support for mt8365 SoC Date: Tue, 07 Mar 2023 13:41:07 +0100 [thread overview] Message-ID: <20221122-mt8365-i2c-support-v4-1-885ad3301d5a@baylibre.com> (raw) In-Reply-To: <20221122-mt8365-i2c-support-v4-0-885ad3301d5a@baylibre.com> There are four I2C master channels in MT8365 with a same HW architecture. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365.dtsi | 48 ++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 15ac4c1f0966..b70f4d256f63 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -282,6 +282,42 @@ pwm: pwm@11006000 { clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi: spi@1100a000 { compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi"; reg = <0 0x1100a000 0 0x100>; @@ -295,6 +331,18 @@ spi: spi@1100a000 { status = "disabled"; }; + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + ssusb: usb@11201000 { compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3"; reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; -- b4 0.10.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-07 12:41 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-07 12:41 [PATCH v4 0/2] Add MediaTek MT8365 I2C support Alexandre Mergnat 2023-03-07 12:41 ` Alexandre Mergnat 2023-03-07 12:41 ` Alexandre Mergnat [this message] 2023-03-07 12:41 ` [PATCH v4 1/2] arm64: dts: mediatek: add i2c support for mt8365 SoC Alexandre Mergnat 2023-03-07 12:41 ` [PATCH v4 2/2] arm64: dts: mediatek: enable i2c0 for mt8365-evk board Alexandre Mergnat 2023-03-07 12:41 ` Alexandre Mergnat
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221122-mt8365-i2c-support-v4-1-885ad3301d5a@baylibre.com \ --to=amergnat@baylibre.com \ --cc=angelogioacchino.delregno@collabora.com \ --cc=devicetree@vger.kernel.org \ --cc=fparent@baylibre.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=qii.wang@mediatek.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.