From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jonathan Marek <jonathan@marek.ca>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org
Subject: [PATCH v2 7/7] drm/msm/dsi: add support for DSI 2.7.0
Date: Mon, 09 Jan 2023 10:26:39 +0100 [thread overview]
Message-ID: <20230103-topic-sm8550-upstream-mdss-dsi-v2-7-87f1c16d7635@linaro.org> (raw)
In-Reply-To: <20230103-topic-sm8550-upstream-mdss-dsi-v2-0-87f1c16d7635@linaro.org>
Add support for DSI 2.7.0 (block used on sm8550).
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 ++++++++++++++++
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 59a4cc95a251..33884ebd2f86 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -181,6 +181,20 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
.num_dsi = 2,
};
+static const struct regulator_bulk_data sm8550_dsi_regulators[] = {
+ { .supply = "vdda", .init_load_uA = 16800 }, /* 1.2 V */
+};
+
+static const struct msm_dsi_config sm8550_dsi_cfg = {
+ .io_offset = DSI_6G_REG_SHIFT,
+ .regulator_data = sm8550_dsi_regulators,
+ .num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
+ .bus_clk_names = dsi_sdm845_bus_clk_names,
+ .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
+ .io_start = { 0xae94000, 0xae96000 },
+ .num_dsi = 2,
+};
+
static const struct regulator_bulk_data sc7180_dsi_regulators[] = {
{ .supply = "vdda", .init_load_uA = 21800 }, /* 1.2 V */
};
@@ -302,6 +316,8 @@ static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
&sc7280_dsi_cfg, &msm_dsi_6g_v2_host_ops},
{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_6_0,
&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+ {MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_7_0,
+ &sm8550_dsi_cfg, &msm_dsi_6g_v2_host_ops},
};
const struct msm_dsi_cfg_handler *msm_dsi_cfg_get(u32 major, u32 minor)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 95957fab499d..44be4a88aa83 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -26,6 +26,7 @@
#define MSM_DSI_6G_VER_MINOR_V2_4_1 0x20040001
#define MSM_DSI_6G_VER_MINOR_V2_5_0 0x20050000
#define MSM_DSI_6G_VER_MINOR_V2_6_0 0x20060000
+#define MSM_DSI_6G_VER_MINOR_V2_7_0 0x20070000
#define MSM_DSI_V2_VER_MINOR_8064 0x0
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 7/7] drm/msm/dsi: add support for DSI 2.7.0
Date: Mon, 09 Jan 2023 10:26:39 +0100 [thread overview]
Message-ID: <20230103-topic-sm8550-upstream-mdss-dsi-v2-7-87f1c16d7635@linaro.org> (raw)
In-Reply-To: <20230103-topic-sm8550-upstream-mdss-dsi-v2-0-87f1c16d7635@linaro.org>
Add support for DSI 2.7.0 (block used on sm8550).
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 ++++++++++++++++
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 59a4cc95a251..33884ebd2f86 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -181,6 +181,20 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
.num_dsi = 2,
};
+static const struct regulator_bulk_data sm8550_dsi_regulators[] = {
+ { .supply = "vdda", .init_load_uA = 16800 }, /* 1.2 V */
+};
+
+static const struct msm_dsi_config sm8550_dsi_cfg = {
+ .io_offset = DSI_6G_REG_SHIFT,
+ .regulator_data = sm8550_dsi_regulators,
+ .num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
+ .bus_clk_names = dsi_sdm845_bus_clk_names,
+ .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
+ .io_start = { 0xae94000, 0xae96000 },
+ .num_dsi = 2,
+};
+
static const struct regulator_bulk_data sc7180_dsi_regulators[] = {
{ .supply = "vdda", .init_load_uA = 21800 }, /* 1.2 V */
};
@@ -302,6 +316,8 @@ static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
&sc7280_dsi_cfg, &msm_dsi_6g_v2_host_ops},
{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_6_0,
&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+ {MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_7_0,
+ &sm8550_dsi_cfg, &msm_dsi_6g_v2_host_ops},
};
const struct msm_dsi_cfg_handler *msm_dsi_cfg_get(u32 major, u32 minor)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 95957fab499d..44be4a88aa83 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -26,6 +26,7 @@
#define MSM_DSI_6G_VER_MINOR_V2_4_1 0x20040001
#define MSM_DSI_6G_VER_MINOR_V2_5_0 0x20050000
#define MSM_DSI_6G_VER_MINOR_V2_6_0 0x20060000
+#define MSM_DSI_6G_VER_MINOR_V2_7_0 0x20070000
#define MSM_DSI_V2_VER_MINOR_8064 0x0
--
2.34.1
next prev parent reply other threads:[~2023-01-09 9:27 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 9:26 [PATCH v2 0/7] drm/msm: add support for SM8550 Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:26 ` [PATCH v2 1/7] dt-bindings: display/msm: document the SM8550 DSI PHY Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:45 ` Krzysztof Kozlowski
2023-01-09 9:45 ` Krzysztof Kozlowski
2023-01-09 9:26 ` [PATCH v2 2/7] dt-bindings: display/msm: document DPU on SM8550 Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:46 ` Krzysztof Kozlowski
2023-01-09 9:46 ` Krzysztof Kozlowski
2023-01-09 9:26 ` [PATCH v2 3/7] dt-bindings: display/msm: document MDSS " Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:47 ` Krzysztof Kozlowski
2023-01-09 9:47 ` Krzysztof Kozlowski
2023-01-09 9:26 ` [PATCH v2 4/7] drm/msm/dpu: add support for SM8550 Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:26 ` [PATCH v2 5/7] drm/msm: mdss: " Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:26 ` [PATCH v2 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550 Neil Armstrong
2023-01-09 9:26 ` Neil Armstrong
2023-01-09 9:38 ` Neil Armstrong
2023-01-09 9:38 ` Neil Armstrong
2023-01-09 10:02 ` Dmitry Baryshkov
2023-01-09 10:02 ` Dmitry Baryshkov
2023-01-09 9:26 ` Neil Armstrong [this message]
2023-01-09 9:26 ` [PATCH v2 7/7] drm/msm/dsi: add support for DSI 2.7.0 Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230103-topic-sm8550-upstream-mdss-dsi-v2-7-87f1c16d7635@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.