All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Li RongQing <lirongqing@baidu.com>,
	Greg Edwards <gedwards@ddn.com>
Subject: [PATCH v5 15/33] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch
Date: Fri,  6 Jan 2023 01:12:48 +0000	[thread overview]
Message-ID: <20230106011306.85230-16-seanjc@google.com> (raw)
In-Reply-To: <20230106011306.85230-1-seanjc@google.com>

Document that AVIC is inhibited if any vCPU's APIC ID diverges from its
vCPU ID, i.e. that there's no need to check for a destination match in
the AVIC kick fast path.

Opportunistically tweak comments to remove "guest bug", as that suggests
KVM is punting on error handling, which is not the case.  Targeting a
non-existent vCPU or no vCPUs _may_ be a guest software bug, but whether
or not it's a guest bug is irrelevant.  Such behavior is architecturally
legal and thus needs to faithfully emulated by KVM (and it is).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
---
 arch/x86/kvm/svm/avic.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index e4b5f8b14882..eb2ad5b54877 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -368,8 +368,8 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
 			cluster = (dest >> 4) << 2;
 		}
 
+		/* Nothing to do if there are no destinations in the cluster. */
 		if (unlikely(!bitmap))
-			/* guest bug: nobody to send the logical interrupt to */
 			return 0;
 
 		if (!is_power_of_2(bitmap))
@@ -397,7 +397,7 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
 			if (WARN_ON_ONCE(index != logid_index))
 				return -EINVAL;
 
-			/* guest bug: non existing/reserved logical destination */
+			/* Nothing to do if the logical destination is invalid. */
 			if (unlikely(!(logid_entry & AVIC_LOGICAL_ID_ENTRY_VALID_MASK)))
 				return 0;
 
@@ -406,9 +406,13 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
 		}
 	}
 
+	/*
+	 * KVM inhibits AVIC if any vCPU ID diverges from the vCPUs APIC ID,
+	 * i.e. APIC ID == vCPU ID.  Once again, nothing to do if the target
+	 * vCPU doesn't exist.
+	 */
 	target_vcpu = kvm_get_vcpu_by_id(kvm, l1_physical_id);
 	if (unlikely(!target_vcpu))
-		/* guest bug: non existing vCPU is a target of this IPI*/
 		return 0;
 
 	target_vcpu->arch.apic->irr_pending = true;
-- 
2.39.0.314.g84b9a713c41-goog


  parent reply	other threads:[~2023-01-06  1:14 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06  1:12 [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 01/33] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 02/33] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 03/33] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2023-01-08 14:25   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 04/33] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 05/33] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 06/33] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 07/33] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 08/33] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 09/33] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 10/33] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2023-01-08 14:30   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 11/33] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 12/33] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 13/33] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 14/33] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2023-01-06  1:12 ` Sean Christopherson [this message]
2023-01-06  1:12 ` [PATCH v5 16/33] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 17/33] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2023-01-08 15:14   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 19/33] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 20/33] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 21/33] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 22/33] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 23/33] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 24/33] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 25/33] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 26/33] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 27/33] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2023-01-08 15:20   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 28/33] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 29/33] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 30/33] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 31/33] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 32/33] KVM: x86: Allow APICv APIC ID inhibit to be cleared Sean Christopherson
2023-01-08 15:25   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 33/33] KVM: x86: Add helpers to recalc physical vs. logical optimized APIC maps Sean Christopherson
2023-01-08 15:32   ` Maxim Levitsky
2023-02-15 20:25 ` [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Suthikulpanit, Suravee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230106011306.85230-16-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=gedwards@ddn.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.