All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxim Levitsky <mlevitsk@redhat.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Li RongQing <lirongqing@baidu.com>,
	Greg Edwards <gedwards@ddn.com>
Subject: Re: [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes
Date: Sun, 08 Jan 2023 17:14:19 +0200	[thread overview]
Message-ID: <b7f42f539bbaf7cc03b748d60a796078bb01c3f8.camel@redhat.com> (raw)
In-Reply-To: <20230106011306.85230-19-seanjc@google.com>

On Fri, 2023-01-06 at 01:12 +0000, Sean Christopherson wrote:
> Track all possibilities for the optimized APIC map's logical modes
> instead of overloading the pseudo-bitmap and treating any "unknown" value
> as "invalid".
> 
> As documented by the now-stale comment above the mode values, the values
> did have meaning when the optimized map was originally added.  That
> dependent logical was removed by commit e45115b62f9a ("KVM: x86: use
> physical LAPIC array for logical x2APIC"), but the obfuscated behavior
> and its comment were left behind.
> 
> Opportunistically rename "mode" to "logical_mode", partly to make it
> clear that the "disabled" case applies only to the logical map, but also
> to prove that there is no lurking code that expects "mode" to be a bitmap.
> 
> Functionally, this is a glorified nop.
> 
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> ---
>  arch/x86/include/asm/kvm_host.h | 29 ++++++++++++++++--------
>  arch/x86/kvm/lapic.c            | 40 ++++++++++++++++++++++++++-------
>  2 files changed, 52 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 1d92c148e799..732421a0ad02 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1022,19 +1022,30 @@ struct kvm_arch_memory_slot {
>  };
>  
>  /*
> - * We use as the mode the number of bits allocated in the LDR for the
> - * logical processor ID.  It happens that these are all powers of two.
> - * This makes it is very easy to detect cases where the APICs are
> - * configured for multiple modes; in that case, we cannot use the map and
> - * hence cannot use kvm_irq_delivery_to_apic_fast either.
> + * Track the mode of the optimized logical map, as the rules for decoding the
> + * destination vary per mode.  Enabling the optimized logical map requires all
> + * software-enabled local APIs to be in the same mode, each addressable APIC to
> + * be mapped to only one MDA, and each MDA to map to at most one APIC.
>   */
> -#define KVM_APIC_MODE_XAPIC_CLUSTER          4
> -#define KVM_APIC_MODE_XAPIC_FLAT             8
> -#define KVM_APIC_MODE_X2APIC                16
> +enum kvm_apic_logical_mode {
> +	/* All local APICs are software disabled. */
> +	KVM_APIC_MODE_SW_DISABLED,
> +	/* All software enabled local APICs in xAPIC cluster addressing mode. */
> +	KVM_APIC_MODE_XAPIC_CLUSTER,
> +	/* All software enabled local APICs in xAPIC flat addressing mode. */
> +	KVM_APIC_MODE_XAPIC_FLAT,
> +	/* All software enabled local APICs in x2APIC mode. */
> +	KVM_APIC_MODE_X2APIC,
> +	/*
> +	 * Optimized map disabled, e.g. not all local APICs in the same logical
> +	 * mode, same logical ID assigned to multiple APICs, etc.
> +	 */
> +	KVM_APIC_MODE_MAP_DISABLED,
> +};
>  
>  struct kvm_apic_map {
>  	struct rcu_head rcu;
> -	u8 mode;
> +	enum kvm_apic_logical_mode logical_mode;
>  	u32 max_apic_id;
>  	union {
>  		struct kvm_lapic *xapic_flat_map[8];
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 2aee712e42bb..2567998b692c 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -168,7 +168,12 @@ static bool kvm_use_posted_timer_interrupt(struct kvm_vcpu *vcpu)
>  
>  static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
>  		u32 dest_id, struct kvm_lapic ***cluster, u16 *mask) {
> -	switch (map->mode) {
> +	switch (map->logical_mode) {
> +	case KVM_APIC_MODE_SW_DISABLED:
> +		/* Arbitrarily use the flat map so that @cluster isn't NULL. */
> +		*cluster = map->xapic_flat_map;
> +		*mask = 0;
> +		return true;
>  	case KVM_APIC_MODE_X2APIC: {
>  		u32 offset = (dest_id >> 16) * 16;
>  		u32 max_apic_id = map->max_apic_id;
> @@ -193,8 +198,10 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
>  		*cluster = map->xapic_cluster_map[(dest_id >> 4) & 0xf];
>  		*mask = dest_id & 0xf;
>  		return true;
> +	case KVM_APIC_MODE_MAP_DISABLED:
> +		return false;
>  	default:
> -		/* Not optimized. */
> +		WARN_ON_ONCE(1);
>  		return false;
>  	}
>  }
> @@ -256,10 +263,12 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
>  		goto out;
>  
>  	new->max_apic_id = max_id;
> +	new->logical_mode = KVM_APIC_MODE_SW_DISABLED;
>  
>  	kvm_for_each_vcpu(i, vcpu, kvm) {
>  		struct kvm_lapic *apic = vcpu->arch.apic;
>  		struct kvm_lapic **cluster;
> +		enum kvm_apic_logical_mode logical_mode;
>  		u16 mask;
>  		u32 ldr;
>  		u8 xapic_id;
> @@ -282,7 +291,8 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
>  		if (!apic_x2apic_mode(apic) && !new->phys_map[xapic_id])
>  			new->phys_map[xapic_id] = apic;
>  
> -		if (!kvm_apic_sw_enabled(apic))
> +		if (new->logical_mode == KVM_APIC_MODE_MAP_DISABLED ||
> +		    !kvm_apic_sw_enabled(apic))
>  			continue;
>  
>  		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
> @@ -290,17 +300,31 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
>  			continue;
>  
>  		if (apic_x2apic_mode(apic)) {
> -			new->mode |= KVM_APIC_MODE_X2APIC;
> +			logical_mode = KVM_APIC_MODE_X2APIC;
>  		} else {
>  			ldr = GET_APIC_LOGICAL_ID(ldr);
>  			if (kvm_lapic_get_reg(apic, APIC_DFR) == APIC_DFR_FLAT)
> -				new->mode |= KVM_APIC_MODE_XAPIC_FLAT;
> +				logical_mode = KVM_APIC_MODE_XAPIC_FLAT;
>  			else
> -				new->mode |= KVM_APIC_MODE_XAPIC_CLUSTER;
> +				logical_mode = KVM_APIC_MODE_XAPIC_CLUSTER;
>  		}
>  
> -		if (!kvm_apic_map_get_logical_dest(new, ldr, &cluster, &mask))
> +		/*
> +		 * To optimize logical mode delivery, all software-enabled APICs must
> +		 * be configured for the same mode.
> +		 */
> +		if (new->logical_mode == KVM_APIC_MODE_SW_DISABLED) {
> +			new->logical_mode = logical_mode;
> +		} else if (new->logical_mode != logical_mode) {
> +			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
>  			continue;
> +		}
> +
> +		if (WARN_ON_ONCE(!kvm_apic_map_get_logical_dest(new, ldr,
> +								&cluster, &mask))) {
> +			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
> +			continue;
> +		}
>  
>  		if (mask)
>  			cluster[ffs(mask) - 1] = apic;
> @@ -953,7 +977,7 @@ static bool kvm_apic_is_broadcast_dest(struct kvm *kvm, struct kvm_lapic **src,
>  {
>  	if (kvm->arch.x2apic_broadcast_quirk_disabled) {
>  		if ((irq->dest_id == APIC_BROADCAST &&
> -				map->mode != KVM_APIC_MODE_X2APIC))
> +		     map->logical_mode != KVM_APIC_MODE_X2APIC))
>  			return true;
>  		if (irq->dest_id == X2APIC_BROADCAST)
>  			return true;


Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
	Maxim Levitsky


  reply	other threads:[~2023-01-08 15:15 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06  1:12 [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 01/33] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 02/33] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 03/33] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2023-01-08 14:25   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 04/33] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 05/33] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 06/33] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 07/33] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 08/33] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 09/33] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 10/33] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2023-01-08 14:30   ` Maxim Levitsky
2023-01-06  1:12 ` [PATCH v5 11/33] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 12/33] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 13/33] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 14/33] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 15/33] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 16/33] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 17/33] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 18/33] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2023-01-08 15:14   ` Maxim Levitsky [this message]
2023-01-06  1:12 ` [PATCH v5 19/33] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 20/33] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 21/33] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 22/33] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 23/33] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 24/33] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 25/33] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2023-01-06  1:12 ` [PATCH v5 26/33] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 27/33] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2023-01-08 15:20   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 28/33] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 29/33] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 30/33] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 31/33] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2023-01-06  1:13 ` [PATCH v5 32/33] KVM: x86: Allow APICv APIC ID inhibit to be cleared Sean Christopherson
2023-01-08 15:25   ` Maxim Levitsky
2023-01-06  1:13 ` [PATCH v5 33/33] KVM: x86: Add helpers to recalc physical vs. logical optimized APIC maps Sean Christopherson
2023-01-08 15:32   ` Maxim Levitsky
2023-02-15 20:25 ` [PATCH v5 00/33] KVM: x86: AVIC and local APIC fixes+cleanups Suthikulpanit, Suravee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b7f42f539bbaf7cc03b748d60a796078bb01c3f8.camel@redhat.com \
    --to=mlevitsk@redhat.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=gedwards@ddn.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.