From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v2 08/12] staging: iio: accel: adis16203: Trivial whitespace cleanup
Date: Sun, 29 Jan 2023 15:55:58 +0000 [thread overview]
Message-ID: <20230129155602.740743-9-jic23@kernel.org> (raw)
In-Reply-To: <20230129155602.740743-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Identation etc in this driver was inconsistent. Fix that.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/staging/iio/accel/adis16203.c | 97 +++++++++++++--------------
1 file changed, 46 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c
index 271e560c41c0..20e9c9eb9436 100644
--- a/drivers/staging/iio/accel/adis16203.c
+++ b/drivers/staging/iio/accel/adis16203.c
@@ -16,49 +16,49 @@
#define ADIS16203_STARTUP_DELAY_MS 220
-#define ADIS16203_FLASH_CNT 0x00
-#define ADIS16203_SUPPLY_OUT 0x02
-#define ADIS16203_AUX_ADC 0x08
-#define ADIS16203_TEMP_OUT 0x0A
-#define ADIS16203_INCL_OUT 0x0C
-#define ADIS16203_INCL_OUT_180 0x0E
-#define ADIS16203_INCL_NULL 0x18
-#define ADIS16203_ALM_MAG1 0x20
-#define ADIS16203_ALM_MAG2 0x22
-#define ADIS16203_ALM_SMPL1 0x24
-#define ADIS16203_ALM_SMPL2 0x26
-#define ADIS16203_ALM_CTRL 0x28
-#define ADIS16203_AUX_DAC 0x30
-#define ADIS16203_GPIO_CTRL 0x32
-#define ADIS16203_MSC_CTRL 0x34
-#define ADIS16203_SMPL_PRD 0x36
-#define ADIS16203_AVG_CNT 0x38
-#define ADIS16203_SLP_CNT 0x3A
-#define ADIS16203_DIAG_STAT 0x3C
-#define ADIS16203_GLOB_CMD 0x3E
-
-#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST_DIS BIT(10)
-#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9)
-#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8)
-#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2)
-#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1)
-#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
-
-#define ADIS16203_DIAG_STAT_ALARM2 BIT(9)
-#define ADIS16203_DIAG_STAT_ALARM1 BIT(8)
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
-#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3
-#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2
-#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
-#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
-
-#define ADIS16203_GLOB_CMD_SW_RESET BIT(7)
-#define ADIS16203_GLOB_CMD_CLEAR_STAT BIT(4)
-#define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1)
-
-#define ADIS16203_ERROR_ACTIVE BIT(14)
-
-#define ADIS16203_INCLI_NULL_MSK GENMASK(13, 0)
+#define ADIS16203_FLASH_CNT 0x00
+#define ADIS16203_SUPPLY_OUT 0x02
+#define ADIS16203_AUX_ADC 0x08
+#define ADIS16203_TEMP_OUT 0x0A
+#define ADIS16203_INCL_OUT 0x0C
+#define ADIS16203_INCL_OUT_180 0x0E
+#define ADIS16203_INCL_NULL 0x18
+#define ADIS16203_ALM_MAG1 0x20
+#define ADIS16203_ALM_MAG2 0x22
+#define ADIS16203_ALM_SMPL1 0x24
+#define ADIS16203_ALM_SMPL2 0x26
+#define ADIS16203_ALM_CTRL 0x28
+#define ADIS16203_AUX_DAC 0x30
+#define ADIS16203_GPIO_CTRL 0x32
+#define ADIS16203_MSC_CTRL 0x34
+#define ADIS16203_SMPL_PRD 0x36
+#define ADIS16203_AVG_CNT 0x38
+#define ADIS16203_SLP_CNT 0x3A
+#define ADIS16203_DIAG_STAT 0x3C
+#define ADIS16203_GLOB_CMD 0x3E
+
+#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST_DIS BIT(10)
+#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9)
+#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8)
+#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2)
+#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1)
+#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
+
+#define ADIS16203_DIAG_STAT_ALARM2 BIT(9)
+#define ADIS16203_DIAG_STAT_ALARM1 BIT(8)
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
+
+#define ADIS16203_GLOB_CMD_SW_RESET BIT(7)
+#define ADIS16203_GLOB_CMD_CLEAR_STAT BIT(4)
+#define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1)
+
+#define ADIS16203_ERROR_ACTIVE BIT(14)
+
+#define ADIS16203_INCLI_NULL_MSK GENMASK(13, 0)
enum adis16203_scan {
ADIS16203_SCAN_INCLI_X,
@@ -69,9 +69,7 @@ enum adis16203_scan {
static int adis16203_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
- int val,
- int val2,
- long mask)
+ int val, int val2, long mask)
{
struct adis *st = iio_priv(indio_dev);
@@ -84,18 +82,16 @@ static int adis16203_write_raw(struct iio_dev *indio_dev,
static int adis16203_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
- int *val, int *val2,
- long mask)
+ int *val, int *val2, long mask)
{
struct adis *st = iio_priv(indio_dev);
int ret;
-
s16 val16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return adis_single_conversion(indio_dev, chan,
- ADIS16203_ERROR_ACTIVE, val);
+ ADIS16203_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
@@ -220,7 +216,6 @@ static const struct of_device_id adis16203_of_match[] = {
{ .compatible = "adi,adis16203" },
{ },
};
-
MODULE_DEVICE_TABLE(of, adis16203_of_match);
static struct spi_driver adis16203_driver = {
--
2.39.1
next prev parent reply other threads:[~2023-01-29 15:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-29 15:55 [PATCH v2 00/12] staging: iio: accel: adis16203 Inclinometer cleanup and graduation Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 01/12] staging: iio: accel: adis16203: More conventional header ordering Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 02/12] staging: iio: accel: adis16203: Drop excessive register comments Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 03/12] staging: iio: accel: adis16203: Rename incli channel registers Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 04/12] staging: iio: accel: adis16203: Drop the 180 degree offset channel Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 05/12] staging: iio: accel: adis16203: Simplify handling of calibbias Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 06/12] staging: iio: accel: adis16203: Drop driver name define Jonathan Cameron
2023-01-29 15:55 ` [PATCH v2 07/12] staging: iio: accel: adis16203: Make units explicit in name of delay define Jonathan Cameron
2023-01-29 15:55 ` Jonathan Cameron [this message]
2023-01-29 15:55 ` [PATCH v2 09/12] staging: iio: accel: adis16203: Drop setting drvdata as nothing gets it Jonathan Cameron
2023-01-29 15:56 ` [PATCH v2 10/12] staging: iio: accel: adis16203: Trivial style cleanup Jonathan Cameron
2023-01-29 15:56 ` [PATCH v2 11/12] staging: iio: accel: adis16203: Move out of staging Jonathan Cameron
2023-01-29 15:56 ` [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer Jonathan Cameron
2023-01-30 13:35 ` Rob Herring
2023-01-30 15:21 ` Rob Herring
2023-01-30 17:09 ` Jonathan Cameron
2023-01-30 17:24 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230129155602.740743-9-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.