All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>, Tejun Heo <tj@kernel.org>,
	Josef Bacik <josef@toxicpanda.com>
Cc: linux-block@vger.kernel.org, cgroups@vger.kernel.org
Subject: [PATCH 12/19] blk-rq-qos: move rq_qos_add and rq_qos_del out of line
Date: Wed,  1 Feb 2023 14:41:16 +0100	[thread overview]
Message-ID: <20230201134123.2656505-13-hch@lst.de> (raw)
In-Reply-To: <20230201134123.2656505-1-hch@lst.de>

These two functions are rather larger and not in a fast path, so move
them out of line.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-rq-qos.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
 block/blk-rq-qos.h | 61 ++--------------------------------------------
 2 files changed, 62 insertions(+), 59 deletions(-)

diff --git a/block/blk-rq-qos.c b/block/blk-rq-qos.c
index 88f0fe7dcf5451..aae98dcb01ebe7 100644
--- a/block/blk-rq-qos.c
+++ b/block/blk-rq-qos.c
@@ -294,3 +294,63 @@ void rq_qos_exit(struct request_queue *q)
 		rqos->ops->exit(rqos);
 	}
 }
+
+int rq_qos_add(struct request_queue *q, struct rq_qos *rqos)
+{
+	/*
+	 * No IO can be in-flight when adding rqos, so freeze queue, which
+	 * is fine since we only support rq_qos for blk-mq queue.
+	 *
+	 * Reuse ->queue_lock for protecting against other concurrent
+	 * rq_qos adding/deleting
+	 */
+	blk_mq_freeze_queue(q);
+
+	spin_lock_irq(&q->queue_lock);
+	if (rq_qos_id(q, rqos->id))
+		goto ebusy;
+	rqos->next = q->rq_qos;
+	q->rq_qos = rqos;
+	spin_unlock_irq(&q->queue_lock);
+
+	blk_mq_unfreeze_queue(q);
+
+	if (rqos->ops->debugfs_attrs) {
+		mutex_lock(&q->debugfs_mutex);
+		blk_mq_debugfs_register_rqos(rqos);
+		mutex_unlock(&q->debugfs_mutex);
+	}
+
+	return 0;
+ebusy:
+	spin_unlock_irq(&q->queue_lock);
+	blk_mq_unfreeze_queue(q);
+	return -EBUSY;
+
+}
+
+void rq_qos_del(struct request_queue *q, struct rq_qos *rqos)
+{
+	struct rq_qos **cur;
+
+	/*
+	 * See comment in rq_qos_add() about freezing queue & using
+	 * ->queue_lock.
+	 */
+	blk_mq_freeze_queue(q);
+
+	spin_lock_irq(&q->queue_lock);
+	for (cur = &q->rq_qos; *cur; cur = &(*cur)->next) {
+		if (*cur == rqos) {
+			*cur = rqos->next;
+			break;
+		}
+	}
+	spin_unlock_irq(&q->queue_lock);
+
+	blk_mq_unfreeze_queue(q);
+
+	mutex_lock(&q->debugfs_mutex);
+	blk_mq_debugfs_unregister_rqos(rqos);
+	mutex_unlock(&q->debugfs_mutex);
+}
diff --git a/block/blk-rq-qos.h b/block/blk-rq-qos.h
index 1ef1f7d4bc3cbc..805eee8b031d00 100644
--- a/block/blk-rq-qos.h
+++ b/block/blk-rq-qos.h
@@ -85,65 +85,8 @@ static inline void rq_wait_init(struct rq_wait *rq_wait)
 	init_waitqueue_head(&rq_wait->wait);
 }
 
-static inline int rq_qos_add(struct request_queue *q, struct rq_qos *rqos)
-{
-	/*
-	 * No IO can be in-flight when adding rqos, so freeze queue, which
-	 * is fine since we only support rq_qos for blk-mq queue.
-	 *
-	 * Reuse ->queue_lock for protecting against other concurrent
-	 * rq_qos adding/deleting
-	 */
-	blk_mq_freeze_queue(q);
-
-	spin_lock_irq(&q->queue_lock);
-	if (rq_qos_id(q, rqos->id))
-		goto ebusy;
-	rqos->next = q->rq_qos;
-	q->rq_qos = rqos;
-	spin_unlock_irq(&q->queue_lock);
-
-	blk_mq_unfreeze_queue(q);
-
-	if (rqos->ops->debugfs_attrs) {
-		mutex_lock(&q->debugfs_mutex);
-		blk_mq_debugfs_register_rqos(rqos);
-		mutex_unlock(&q->debugfs_mutex);
-	}
-
-	return 0;
-ebusy:
-	spin_unlock_irq(&q->queue_lock);
-	blk_mq_unfreeze_queue(q);
-	return -EBUSY;
-
-}
-
-static inline void rq_qos_del(struct request_queue *q, struct rq_qos *rqos)
-{
-	struct rq_qos **cur;
-
-	/*
-	 * See comment in rq_qos_add() about freezing queue & using
-	 * ->queue_lock.
-	 */
-	blk_mq_freeze_queue(q);
-
-	spin_lock_irq(&q->queue_lock);
-	for (cur = &q->rq_qos; *cur; cur = &(*cur)->next) {
-		if (*cur == rqos) {
-			*cur = rqos->next;
-			break;
-		}
-	}
-	spin_unlock_irq(&q->queue_lock);
-
-	blk_mq_unfreeze_queue(q);
-
-	mutex_lock(&q->debugfs_mutex);
-	blk_mq_debugfs_unregister_rqos(rqos);
-	mutex_unlock(&q->debugfs_mutex);
-}
+int rq_qos_add(struct request_queue *q, struct rq_qos *rqos);
+void rq_qos_del(struct request_queue *q, struct rq_qos *rqos);
 
 typedef bool (acquire_inflight_cb_t)(struct rq_wait *rqw, void *private_data);
 typedef void (cleanup_cb_t)(struct rq_wait *rqw, void *private_data);
-- 
2.39.0


  parent reply	other threads:[~2023-02-01 13:42 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-01 13:41 switch blk-cgroup to work on gendisk v3 Christoph Hellwig
2023-02-01 13:41 ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 01/19] block: don't call blk_throtl_stat_add for non-READ/WRITE commands Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 02/19] blk-cgroup: delay blk-cgroup initialization until add_disk Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-03  0:08   ` Tejun Heo
2023-02-03  0:08     ` Tejun Heo
2023-02-07 14:40   ` Ming Lei
2023-02-08  6:35     ` Christoph Hellwig
2023-02-08  6:35       ` Christoph Hellwig
2023-02-08  7:32       ` Ming Lei
2023-02-08  7:32         ` Ming Lei
2023-02-01 13:41 ` [PATCH 03/19] blk-cgroup: improve error unwinding in blkg_alloc Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-03  0:10   ` Tejun Heo
2023-02-03  0:10     ` Tejun Heo
2023-02-03  8:04     ` Christoph Hellwig
2023-02-03  8:04       ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 04/19] blk-cgroup: simplify blkg freeing from initialization failure paths Christoph Hellwig
2023-02-03  0:12   ` Tejun Heo
2023-02-03  0:12     ` Tejun Heo
2023-02-01 13:41 ` [PATCH 05/19] blk-cgroup: remove the !bdi->dev check in blkg_dev_name Christoph Hellwig
2023-02-01 13:41 ` [PATCH 06/19] blk-cgroup: pin the gendisk in struct blkcg_gq Christoph Hellwig
2023-02-03  0:15   ` Tejun Heo
2023-02-01 13:41 ` [PATCH 07/19] blk-cgroup: store a gendisk to throttle in struct task_struct Christoph Hellwig
2023-02-03  0:17   ` Tejun Heo
2023-02-03  0:17     ` Tejun Heo
2023-02-03  8:06     ` Christoph Hellwig
2023-02-03  8:06       ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 08/19] blk-wbt: pass a gendisk to wbt_{enable,disable}_default Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 09/19] blk-wbt: pass a gendisk to wbt_init Christoph Hellwig
2023-02-01 13:41 ` [PATCH 10/19] blk-wbt: move private information from blk-wbt.h to blk-wbt.c Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 11/19] blk-wbt: open code wbt_queue_depth_changed in wbt_init Christoph Hellwig
2023-02-01 13:41 ` Christoph Hellwig [this message]
2023-02-01 13:41 ` [PATCH 13/19] blk-rq-qos: make rq_qos_add and rq_qos_del more useful Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 14/19] blk-rq-qos: constify rq_qos_ops Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 15/19] blk-rq-qos: store a gendisk instead of request_queue in struct rq_qos Christoph Hellwig
2023-02-01 13:41 ` [PATCH 16/19] blk-cgroup: pass a gendisk to blkcg_{de,}activate_policy Christoph Hellwig
2023-02-01 13:41 ` [PATCH 17/19] blk-cgroup: pass a gendisk to pd_alloc_fn Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 18/19] blk-cgroup: pass a gendisk to blkg_lookup Christoph Hellwig
2023-02-01 13:41   ` Christoph Hellwig
2023-02-01 13:41 ` [PATCH 19/19] blk-cgroup: move the cgroup information to struct gendisk Christoph Hellwig
2023-02-03  0:24   ` Tejun Heo
2023-02-03 15:03 switch blk-cgroup to work on gendisk v4 Christoph Hellwig
2023-02-03 15:03 ` [PATCH 12/19] blk-rq-qos: move rq_qos_add and rq_qos_del out of line Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230201134123.2656505-13-hch@lst.de \
    --to=hch@lst.de \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=josef@toxicpanda.com \
    --cc=linux-block@vger.kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.