From: Durai Manickam KR <durai.manickamkr@microchip.com>
To: <Hari.PrasathGE@microchip.com>,
<balamanikandan.gunasundar@microchip.com>,
<manikandan.m@microchip.com>, <varshini.rajendran@microchip.com>,
<dharma.b@microchip.com>, <nayabbasha.sayed@microchip.com>,
<balakrishnan.s@microchip.com>, <claudiu.beznea@microchip.com>,
<cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>,
<krzysztof.kozlowski@linaro.org>, <alexandre.belloni@bootlin.com>,
<davem@davemloft.net>, <arnd@arndb.de>, <olof@lixom.net>,
<soc@kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Kavyasree.Kotagiri@microchip.com>,
<Horatiu.Vultur@microchip.com>, <robh+dt@kernel.org>,
<andrew@lunn.ch>, <michael@walle.cc>, <jerry.ray@microchip.com>
Cc: Durai Manickam KR <durai.manickamkr@microchip.com>
Subject: [PATCH v5 8/8] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
Date: Fri, 3 Feb 2023 09:18:33 +0530 [thread overview]
Message-ID: <20230203034833.451461-9-durai.manickamkr@microchip.com> (raw)
In-Reply-To: <20230203034833.451461-1-durai.manickamkr@microchip.com>
Add device tree file for sam9x60 curiosity board.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 501 +++++++++++++++++++
2 files changed, 502 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6aa7dc4db2fc..da20980384c4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM9X60) += \
+ at91-sam9x60_curiosity.dtb \
at91-sam9x60ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..6f0a6d9841fc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Microchip SAM9X60 Curiosity";
+ compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c6;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ button-user {
+ label = "PB_USER";
+ gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-red {
+ label = "red";
+ gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-green {
+ label = "green";
+ gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-blue {
+ label = "blue";
+ gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+
+ vdd_1v8: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "VDD_1V8";
+ };
+
+ vdd_1v15: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-name = "VDD_1V15";
+ };
+
+ vdd1_3v3: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD1_3V3";
+ };
+};
+
+&adc {
+ vddana-supply = <&vdd1_3v3>;
+ vref-supply = <&vdd1_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ status = "okay";
+};
+
+&dbgu {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+ status = "okay";
+
+ nand_controller: nand-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0xc0000>;
+ };
+
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
+ label = "U-Boot Env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+ };
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c0: i2c@600 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+ };
+};
+
+&flx6 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c6: i2c@600 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx6_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "disabled";
+ };
+};
+
+&flx7 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart7: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx7_default>;
+ status = "okay";
+ };
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
+
+&pinctrl {
+ adc {
+ pinctrl_adc_default: adc-default {
+ atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adtrg_default: adtrg-default {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0-rx-tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */
+ AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1-rx-tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 */
+ AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ebi {
+ pinctrl_ebi_data_lsb: ebi-data-lsb {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_ebi_addr_nand: ebi-addr-nand {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ flexcom {
+ pinctrl_flx0_default: flx0-twi {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx6_default: flx6-twi {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx7_default: flx7-usart {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
+ gpio-keys {
+ pinctrl_key_gpio_default: pinctrl-key-gpio {
+ atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ leds {
+ pinctrl_gpio_leds: gpio-leds {
+ atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0-rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+ };
+ };
+
+ nand {
+ pinctrl_nand_oe_we: nand-oe-we-0 {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand_cs: nand-cs-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_0: pwm0-0 {
+ atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_1: pwm0-1 {
+ atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_2: pwm0-2 {
+ atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc0 {
+ pinctrl_sdmmc0_default: sdmmc0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */
+ AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */
+ AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */
+ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */
+ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
+ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
+ };
+ pinctrl_sdmmc0_cd: sdmmc0-cd {
+ atmel,pins =
+ <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc1 {
+ pinctrl_sdmmc1_default: sdmmc1 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
+ AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
+ AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
+ AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
+ AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
+ AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
+ };
+ };
+
+ usb0 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usb1 {
+ pinctrl_usb_default: usb-default {
+ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+}; /* pinctrl */
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+ cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "disabled";
+};
+
+&shutdown_controller {
+ debounce-delay-us = <976>;
+ status = "okay";
+
+ input@0 {
+ reg = <0>;
+ };
+};
+
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&usb0 {
+ atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 18 GPIO_ACTIVE_HIGH
+ &pioD 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Durai Manickam KR <durai.manickamkr@microchip.com>
To: <Hari.PrasathGE@microchip.com>,
<balamanikandan.gunasundar@microchip.com>,
<manikandan.m@microchip.com>, <varshini.rajendran@microchip.com>,
<dharma.b@microchip.com>, <nayabbasha.sayed@microchip.com>,
<balakrishnan.s@microchip.com>, <claudiu.beznea@microchip.com>,
<cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>,
<krzysztof.kozlowski@linaro.org>, <alexandre.belloni@bootlin.com>,
<davem@davemloft.net>, <arnd@arndb.de>, <olof@lixom.net>,
<soc@kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Kavyasree.Kotagiri@microchip.com>,
<Horatiu.Vultur@microchip.com>, <robh+dt@kernel.org>,
<andrew@lunn.ch>, <michael@walle.cc>, <jerry.ray@microchip.com>
Cc: Durai Manickam KR <durai.manickamkr@microchip.com>
Subject: [PATCH v5 8/8] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
Date: Fri, 3 Feb 2023 09:18:33 +0530 [thread overview]
Message-ID: <20230203034833.451461-9-durai.manickamkr@microchip.com> (raw)
In-Reply-To: <20230203034833.451461-1-durai.manickamkr@microchip.com>
Add device tree file for sam9x60 curiosity board.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 501 +++++++++++++++++++
2 files changed, 502 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6aa7dc4db2fc..da20980384c4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM9X60) += \
+ at91-sam9x60_curiosity.dtb \
at91-sam9x60ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..6f0a6d9841fc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Microchip SAM9X60 Curiosity";
+ compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c6;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ button-user {
+ label = "PB_USER";
+ gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-red {
+ label = "red";
+ gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-green {
+ label = "green";
+ gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-blue {
+ label = "blue";
+ gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+
+ vdd_1v8: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "VDD_1V8";
+ };
+
+ vdd_1v15: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-name = "VDD_1V15";
+ };
+
+ vdd1_3v3: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD1_3V3";
+ };
+};
+
+&adc {
+ vddana-supply = <&vdd1_3v3>;
+ vref-supply = <&vdd1_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ status = "okay";
+};
+
+&dbgu {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+ status = "okay";
+
+ nand_controller: nand-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0xc0000>;
+ };
+
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
+ label = "U-Boot Env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+ };
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c0: i2c@600 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+ };
+};
+
+&flx6 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c6: i2c@600 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx6_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "disabled";
+ };
+};
+
+&flx7 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart7: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx7_default>;
+ status = "okay";
+ };
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
+
+&pinctrl {
+ adc {
+ pinctrl_adc_default: adc-default {
+ atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adtrg_default: adtrg-default {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0-rx-tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */
+ AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1-rx-tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 */
+ AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ebi {
+ pinctrl_ebi_data_lsb: ebi-data-lsb {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_ebi_addr_nand: ebi-addr-nand {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ flexcom {
+ pinctrl_flx0_default: flx0-twi {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx6_default: flx6-twi {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx7_default: flx7-usart {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
+ gpio-keys {
+ pinctrl_key_gpio_default: pinctrl-key-gpio {
+ atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ leds {
+ pinctrl_gpio_leds: gpio-leds {
+ atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0-rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+ };
+ };
+
+ nand {
+ pinctrl_nand_oe_we: nand-oe-we-0 {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand_cs: nand-cs-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_0: pwm0-0 {
+ atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_1: pwm0-1 {
+ atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_2: pwm0-2 {
+ atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc0 {
+ pinctrl_sdmmc0_default: sdmmc0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */
+ AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */
+ AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */
+ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */
+ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
+ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
+ };
+ pinctrl_sdmmc0_cd: sdmmc0-cd {
+ atmel,pins =
+ <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc1 {
+ pinctrl_sdmmc1_default: sdmmc1 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
+ AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
+ AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
+ AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
+ AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
+ AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
+ };
+ };
+
+ usb0 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usb1 {
+ pinctrl_usb_default: usb-default {
+ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+}; /* pinctrl */
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+ cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "disabled";
+};
+
+&shutdown_controller {
+ debounce-delay-us = <976>;
+ status = "okay";
+
+ input@0 {
+ reg = <0>;
+ };
+};
+
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&usb0 {
+ atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 18 GPIO_ACTIVE_HIGH
+ &pioD 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-02-03 3:51 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 3:48 [PATCH v5 0/8] Add support for sam9x60 curiosity board Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 3:48 ` [PATCH v5 1/8] ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:07 ` Claudiu.Beznea
2023-02-03 12:07 ` Claudiu.Beznea
2023-02-03 3:48 ` [PATCH v5 2/8] ARM: dts: at91: sam9x60: move flexcom definitions Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 3:48 ` [PATCH v5 3/8] ARM: dts: at91: sam9x60: fix spi4 node Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 3:48 ` [PATCH v5 4/8] ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 3:48 ` [PATCH v5 5/8] ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 3:48 ` [PATCH v5 6/8] ARM: dts: at91: sam9x60: Add missing flexcom definitions Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 12:08 ` Claudiu.Beznea
2023-02-03 12:08 ` Claudiu.Beznea
2023-07-04 15:42 ` Alexander Dahl
2023-07-04 15:42 ` Alexander Dahl
2023-02-03 3:48 ` [PATCH v5 7/8] dt-bindings: arm: at91: Add info on sam9x60 curiosity Durai Manickam KR
2023-02-03 3:48 ` Durai Manickam KR
2023-02-03 8:12 ` Krzysztof Kozlowski
2023-02-03 8:12 ` Krzysztof Kozlowski
2023-02-03 12:10 ` Claudiu.Beznea
2023-02-03 12:10 ` Claudiu.Beznea
2023-02-03 3:48 ` Durai Manickam KR [this message]
2023-02-03 3:48 ` [PATCH v5 8/8] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board Durai Manickam KR
2023-02-03 12:06 ` Claudiu.Beznea
2023-02-03 12:06 ` Claudiu.Beznea
2023-02-03 12:11 ` Claudiu.Beznea
2023-02-03 12:11 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203034833.451461-9-durai.manickamkr@microchip.com \
--to=durai.manickamkr@microchip.com \
--cc=Hari.PrasathGE@microchip.com \
--cc=Horatiu.Vultur@microchip.com \
--cc=Kavyasree.Kotagiri@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=balakrishnan.s@microchip.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=claudiu.beznea@microchip.com \
--cc=cristian.birsan@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dharma.b@microchip.com \
--cc=jerry.ray@microchip.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manikandan.m@microchip.com \
--cc=michael@walle.cc \
--cc=nayabbasha.sayed@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.