From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>
Subject: [PATCH v2 6/7] drm/msm/dsi: Add phy configuration for MSM8226
Date: Tue, 30 May 2023 20:24:16 +0200 [thread overview]
Message-ID: <20230308-msm8226-mdp-v2-6-e005b769ee28@z3ntu.xyz> (raw)
In-Reply-To: <20230308-msm8226-mdp-v2-0-e005b769ee28@z3ntu.xyz>
MSM8226 uses a modified PLL lock sequence compared to MSM8974, which is
based on the function dsi_pll_enable_seq_m in the msm-3.10 kernel.
Worth noting that the msm-3.10 downstream kernel also will try other
sequences in case this one doesn't work, but during testing it has shown
that the _m sequence succeeds first time also:
.pll_enable_seqs[0] = dsi_pll_enable_seq_m,
.pll_enable_seqs[1] = dsi_pll_enable_seq_m,
.pll_enable_seqs[2] = dsi_pll_enable_seq_d,
.pll_enable_seqs[3] = dsi_pll_enable_seq_d,
.pll_enable_seqs[4] = dsi_pll_enable_seq_f1,
.pll_enable_seqs[5] = dsi_pll_enable_seq_c,
.pll_enable_seqs[6] = dsi_pll_enable_seq_e,
We may need to expand this in the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 97 ++++++++++++++++++++++++++++++
3 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index bb09cbe8ff86..9d5795c58a98 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -541,6 +541,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_28nm_hpm_famb_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
+ { .compatible = "qcom,dsi-phy-28nm-8226",
+ .data = &dsi_phy_28nm_8226_cfgs },
#endif
#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
{ .compatible = "qcom,dsi-phy-20nm",
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 7137a17ae523..8b640d174785 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -46,8 +46,9 @@ struct msm_dsi_phy_cfg {
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
-extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 4c1bf55c5f38..ceec7bb87bf1 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -37,6 +37,7 @@
/* v2.0.0 28nm LP implementation */
#define DSI_PHY_28NM_QUIRK_PHY_LP BIT(0)
+#define DSI_PHY_28NM_QUIRK_PHY_8226 BIT(1)
#define LPFR_LUT_SIZE 10
struct lpfr_cfg {
@@ -377,6 +378,74 @@ static int dsi_pll_28nm_vco_prepare_hpm(struct clk_hw *hw)
return ret;
}
+static int dsi_pll_28nm_vco_prepare_8226(struct clk_hw *hw)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
+ struct device *dev = &pll_28nm->phy->pdev->dev;
+ void __iomem *base = pll_28nm->phy->pll_base;
+ u32 max_reads = 5, timeout_us = 100;
+ bool locked;
+ u32 val;
+ int i;
+
+ DBG("id=%d", pll_28nm->phy->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+
+ for (i = 0; i < 7; i++) {
+ /* DSI Uniphy lock detect setting */
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2,
+ 0x0c, 100);
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ /* poll for PLL ready status */
+ locked = pll_28nm_poll_for_ready(pll_28nm,
+ max_reads, timeout_us);
+ if (locked)
+ break;
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00, 50);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 100);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+ }
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL Lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
static int dsi_pll_28nm_vco_prepare_lp(struct clk_hw *hw)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
@@ -471,6 +540,15 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = {
.is_enabled = dsi_pll_28nm_clk_is_enabled,
};
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco_8226 = {
+ .round_rate = dsi_pll_28nm_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = dsi_pll_28nm_vco_prepare_8226,
+ .unprepare = dsi_pll_28nm_vco_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
/*
* PLL Callbacks
*/
@@ -536,6 +614,8 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP)
vco_init.ops = &clk_ops_dsi_pll_28nm_vco_lp;
+ else if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_8226)
+ vco_init.ops = &clk_ops_dsi_pll_28nm_vco_8226;
else
vco_init.ops = &clk_ops_dsi_pll_28nm_vco_hpm;
@@ -820,3 +900,20 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.quirks = DSI_PHY_28NM_QUIRK_PHY_LP,
};
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs = {
+ .has_phy_regulator = true,
+ .regulator_data = dsi_phy_28nm_regulators,
+ .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators),
+ .ops = {
+ .enable = dsi_28nm_phy_enable,
+ .disable = dsi_28nm_phy_disable,
+ .pll_init = dsi_pll_28nm_init,
+ .save_pll_state = dsi_28nm_pll_save_state,
+ .restore_pll_state = dsi_28nm_pll_restore_state,
+ },
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
+ .io_start = { 0xfd922b00 },
+ .num_dsi_phy = 1,
+ .quirks = DSI_PHY_28NM_QUIRK_PHY_8226,
+};
--
2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Luca Weiss <luca@z3ntu.xyz>,
freedreno@lists.freedesktop.org
Subject: [PATCH v2 6/7] drm/msm/dsi: Add phy configuration for MSM8226
Date: Tue, 30 May 2023 20:24:16 +0200 [thread overview]
Message-ID: <20230308-msm8226-mdp-v2-6-e005b769ee28@z3ntu.xyz> (raw)
In-Reply-To: <20230308-msm8226-mdp-v2-0-e005b769ee28@z3ntu.xyz>
MSM8226 uses a modified PLL lock sequence compared to MSM8974, which is
based on the function dsi_pll_enable_seq_m in the msm-3.10 kernel.
Worth noting that the msm-3.10 downstream kernel also will try other
sequences in case this one doesn't work, but during testing it has shown
that the _m sequence succeeds first time also:
.pll_enable_seqs[0] = dsi_pll_enable_seq_m,
.pll_enable_seqs[1] = dsi_pll_enable_seq_m,
.pll_enable_seqs[2] = dsi_pll_enable_seq_d,
.pll_enable_seqs[3] = dsi_pll_enable_seq_d,
.pll_enable_seqs[4] = dsi_pll_enable_seq_f1,
.pll_enable_seqs[5] = dsi_pll_enable_seq_c,
.pll_enable_seqs[6] = dsi_pll_enable_seq_e,
We may need to expand this in the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 97 ++++++++++++++++++++++++++++++
3 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index bb09cbe8ff86..9d5795c58a98 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -541,6 +541,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_28nm_hpm_famb_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
+ { .compatible = "qcom,dsi-phy-28nm-8226",
+ .data = &dsi_phy_28nm_8226_cfgs },
#endif
#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
{ .compatible = "qcom,dsi-phy-20nm",
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 7137a17ae523..8b640d174785 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -46,8 +46,9 @@ struct msm_dsi_phy_cfg {
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
-extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 4c1bf55c5f38..ceec7bb87bf1 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -37,6 +37,7 @@
/* v2.0.0 28nm LP implementation */
#define DSI_PHY_28NM_QUIRK_PHY_LP BIT(0)
+#define DSI_PHY_28NM_QUIRK_PHY_8226 BIT(1)
#define LPFR_LUT_SIZE 10
struct lpfr_cfg {
@@ -377,6 +378,74 @@ static int dsi_pll_28nm_vco_prepare_hpm(struct clk_hw *hw)
return ret;
}
+static int dsi_pll_28nm_vco_prepare_8226(struct clk_hw *hw)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
+ struct device *dev = &pll_28nm->phy->pdev->dev;
+ void __iomem *base = pll_28nm->phy->pll_base;
+ u32 max_reads = 5, timeout_us = 100;
+ bool locked;
+ u32 val;
+ int i;
+
+ DBG("id=%d", pll_28nm->phy->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+
+ for (i = 0; i < 7; i++) {
+ /* DSI Uniphy lock detect setting */
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2,
+ 0x0c, 100);
+ dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ /* poll for PLL ready status */
+ locked = pll_28nm_poll_for_ready(pll_28nm,
+ max_reads, timeout_us);
+ if (locked)
+ break;
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00, 50);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 100);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+ }
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL Lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
static int dsi_pll_28nm_vco_prepare_lp(struct clk_hw *hw)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
@@ -471,6 +540,15 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = {
.is_enabled = dsi_pll_28nm_clk_is_enabled,
};
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco_8226 = {
+ .round_rate = dsi_pll_28nm_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = dsi_pll_28nm_vco_prepare_8226,
+ .unprepare = dsi_pll_28nm_vco_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
/*
* PLL Callbacks
*/
@@ -536,6 +614,8 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP)
vco_init.ops = &clk_ops_dsi_pll_28nm_vco_lp;
+ else if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_8226)
+ vco_init.ops = &clk_ops_dsi_pll_28nm_vco_8226;
else
vco_init.ops = &clk_ops_dsi_pll_28nm_vco_hpm;
@@ -820,3 +900,20 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.quirks = DSI_PHY_28NM_QUIRK_PHY_LP,
};
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs = {
+ .has_phy_regulator = true,
+ .regulator_data = dsi_phy_28nm_regulators,
+ .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators),
+ .ops = {
+ .enable = dsi_28nm_phy_enable,
+ .disable = dsi_28nm_phy_disable,
+ .pll_init = dsi_pll_28nm_init,
+ .save_pll_state = dsi_28nm_pll_save_state,
+ .restore_pll_state = dsi_28nm_pll_restore_state,
+ },
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
+ .io_start = { 0xfd922b00 },
+ .num_dsi_phy = 1,
+ .quirks = DSI_PHY_28NM_QUIRK_PHY_8226,
+};
--
2.40.1
next prev parent reply other threads:[~2023-05-30 18:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 18:24 [PATCH v2 0/7] Display support for MSM8226 Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` [PATCH v2 1/7] dt-bindings: msm: dsi-phy-28nm: Document msm8226 compatible Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` [PATCH v2 2/7] dt-bindings: display/msm: dsi-controller-main: Add " Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` [PATCH v2 3/7] dt-bindings: display/msm: qcom,mdp5: " Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` [PATCH v2 4/7] drm/msm/mdp5: Add MDP5 configuration for MSM8226 Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` [PATCH v2 5/7] drm/msm/dsi: Add " Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 18:24 ` Luca Weiss [this message]
2023-05-30 18:24 ` [PATCH v2 6/7] drm/msm/dsi: Add phy " Luca Weiss
2023-05-30 18:24 ` [PATCH v2 7/7] ARM: dts: qcom: msm8226: Add mdss nodes Luca Weiss
2023-05-30 18:24 ` Luca Weiss
2023-05-30 19:12 ` Stephan Gerhold
2023-05-30 19:12 ` Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230308-msm8226-mdp-v2-6-e005b769ee28@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_mkrishn@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.