[PATCH 7/7] accel/ivpu: Fix VPU clock calculation

From: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>,
	Oded Gabbay <ogabbay@kernel.org>,
	Jeffrey Hugo <quic_jhugo@quicinc.com>,
	Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>,
	Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Subject: [PATCH 7/7] accel/ivpu: Fix VPU clock calculation
Date: Wed, 22 Mar 2023 10:19:00 +0100	[thread overview]
Message-ID: <20230322091900.1982453-8-stanislaw.gruszka@linux.intel.com> (raw)
In-Reply-To: <20230322091900.1982453-1-stanislaw.gruszka@linux.intel.com>

VPU cpu clock frequency depends on the workpoint configuration
that was granted by the punit. Previously driver was passing
incorrect frequency to the VPU firmware.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
---
 drivers/accel/ivpu/ivpu_hw_mtl.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/accel/ivpu/ivpu_hw_mtl.c b/drivers/accel/ivpu/ivpu_hw_mtl.c
index 98c8a4aa25f0..382ec127be8e 100644
--- a/drivers/accel/ivpu/ivpu_hw_mtl.c
+++ b/drivers/accel/ivpu/ivpu_hw_mtl.c
@@ -29,7 +29,6 @@
 
 #define PLL_REF_CLK_FREQ	     (50 * 1000000)
 #define PLL_SIMULATION_FREQ	     (10 * 1000000)
-#define PLL_RATIO_TO_FREQ(x)	     ((x) * PLL_REF_CLK_FREQ)
 #define PLL_DEFAULT_EPP_VALUE	     0x80
 
 #define TIM_SAFE_ENABLE		     0xf1d0dead
@@ -789,6 +788,19 @@ static void ivpu_hw_mtl_wdt_disable(struct ivpu_device *vdev)
 	REGV_WR32(MTL_VPU_CPU_SS_TIM_GEN_CONFIG, val);
 }
 
+static u32 ivpu_hw_mtl_pll_to_freq(u32 ratio, u32 config)
+{
+	u32 pll_clock = PLL_REF_CLK_FREQ * ratio;
+	u32 cpu_clock;
+
+	if ((config & 0xff) == PLL_RATIO_4_3)
+		cpu_clock = pll_clock * 2 / 4;
+	else
+		cpu_clock = pll_clock * 2 / 5;
+
+	return cpu_clock;
+}
+
 /* Register indirect accesses */
 static u32 ivpu_hw_mtl_reg_pll_freq_get(struct ivpu_device *vdev)
 {
@@ -800,7 +812,7 @@ static u32 ivpu_hw_mtl_reg_pll_freq_get(struct ivpu_device *vdev)
 	if (!ivpu_is_silicon(vdev))
 		return PLL_SIMULATION_FREQ;
 
-	return PLL_RATIO_TO_FREQ(pll_curr_ratio);
+	return ivpu_hw_mtl_pll_to_freq(pll_curr_ratio, vdev->hw->config);
 }
 
 static u32 ivpu_hw_mtl_reg_telemetry_offset_get(struct ivpu_device *vdev)
-- 
2.25.1

