From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>
Subject: [PATCH v6 06/12] drm/msm/dpu: Add SM6350 support
Date: Tue, 06 Jun 2023 14:43:57 +0200 [thread overview]
Message-ID: <20230411-topic-straitlagoon_mdss-v6-6-dee6a882571b@linaro.org> (raw)
In-Reply-To: <20230411-topic-straitlagoon_mdss-v6-0-dee6a882571b@linaro.org>
Add SM6350 support to the DPU1 driver to enable display output.
It's worth noting that one entry dpu_qos_lut_entry was trimmed off:
{.fl = 0, .lut = 0x0011223344556677 },
due to the lack of support for selecting between portrait and landscape
LUT settings (for danger and safe LUTs) and no full support for
qseed/non-qseed usescases (for QoS LUT).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h | 173 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 180 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
new file mode 100644
index 000000000000..06eba23b0236
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DPU_6_4_SM6350_H
+#define _DPU_6_4_SM6350_H
+
+static const struct dpu_caps sm6350_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0x7,
+ .qseed_type = DPU_SSPP_SCALER_QSEED4,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_ubwc_cfg sm6350_ubwc_cfg = {
+ .ubwc_version = DPU_HW_UBWC_VER_20,
+ .ubwc_swizzle = 6,
+ .highest_bank_bit = 1,
+};
+
+static const struct dpu_mdp_cfg sm6350_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+ },
+};
+
+static const struct dpu_ctl_cfg sm6350_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x1000, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x1200, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x1400, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x1600, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+};
+
+static const struct dpu_sspp_cfg sm6350_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
+ sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
+};
+
+static const struct dpu_lm_cfg sm6350_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
+};
+
+static const struct dpu_dspp_cfg sm6350_dspp[] = {
+ DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+ &sm8150_dspp_sblk),
+};
+
+static struct dpu_pingpong_cfg sm6350_pp[] = {
+ PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ -1),
+ PP_BLK("pingpong_1", PINGPONG_1, 0x70800, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ -1),
+};
+
+static const struct dpu_dsc_cfg sm6350_dsc[] = {
+ DSC_BLK("dsc_0", DSC_0, 0x80000, BIT(DPU_DSC_OUTPUT_CTRL)),
+};
+
+static const struct dpu_intf_cfg sm6350_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x6a000, 0x280, INTF_DP, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25)),
+ INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+ DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
+};
+
+static const struct dpu_perf_cfg sm6350_perf_data = {
+ .max_bw_low = 4200000,
+ .max_bw_high = 5100000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 1600000,
+ .min_prefill_lines = 35,
+ /* TODO: confirm danger_lut_tbl */
+ .danger_lut_tbl = {0xffff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+const struct dpu_mdss_cfg dpu_sm6350_cfg = {
+ .caps = &sm6350_dpu_caps,
+ .ubwc = &sm6350_ubwc_cfg,
+ .mdp_count = ARRAY_SIZE(sm6350_mdp),
+ .mdp = sm6350_mdp,
+ .ctl_count = ARRAY_SIZE(sm6350_ctl),
+ .ctl = sm6350_ctl,
+ .sspp_count = ARRAY_SIZE(sm6350_sspp),
+ .sspp = sm6350_sspp,
+ .mixer_count = ARRAY_SIZE(sm6350_lm),
+ .mixer = sm6350_lm,
+ .dspp_count = ARRAY_SIZE(sm6350_dspp),
+ .dspp = sm6350_dspp,
+ .dsc_count = ARRAY_SIZE(sm6350_dsc),
+ .dsc = sm6350_dsc,
+ .pingpong_count = ARRAY_SIZE(sm6350_pp),
+ .pingpong = sm6350_pp,
+ .intf_count = ARRAY_SIZE(sm6350_intf),
+ .intf = sm6350_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sm6350_perf_data,
+ .mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_INTR) | \
+ BIT(MDP_INTF1_INTR) | \
+ BIT(MDP_INTF1_TEAR_INTR),
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f07eab738008..8bf6562f39e8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -689,6 +689,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222335777},
};
+static const struct dpu_qos_lut_entry sm6350_qos_linear_macrotile[] = {
+ {.fl = 0, .lut = 0x0011223445566777 },
+};
+
static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222223357 },
};
@@ -744,6 +748,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
#include "catalog/dpu_6_0_sm8250.h"
#include "catalog/dpu_6_2_sc7180.h"
#include "catalog/dpu_6_3_sm6115.h"
+#include "catalog/dpu_6_4_sm6350.h"
#include "catalog/dpu_6_5_qcm2290.h"
#include "catalog/dpu_7_0_sm8350.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index d59a9027c4b6..e89edbe0ab98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -832,6 +832,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
+extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 613384b8ca0e..190345e94178 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1305,6 +1305,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
{ .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
{ .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
+ { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
{ .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
{ .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
--
2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>
Subject: [PATCH v6 06/12] drm/msm/dpu: Add SM6350 support
Date: Tue, 06 Jun 2023 14:43:57 +0200 [thread overview]
Message-ID: <20230411-topic-straitlagoon_mdss-v6-6-dee6a882571b@linaro.org> (raw)
In-Reply-To: <20230411-topic-straitlagoon_mdss-v6-0-dee6a882571b@linaro.org>
Add SM6350 support to the DPU1 driver to enable display output.
It's worth noting that one entry dpu_qos_lut_entry was trimmed off:
{.fl = 0, .lut = 0x0011223344556677 },
due to the lack of support for selecting between portrait and landscape
LUT settings (for danger and safe LUTs) and no full support for
qseed/non-qseed usescases (for QoS LUT).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h | 173 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 180 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
new file mode 100644
index 000000000000..06eba23b0236
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DPU_6_4_SM6350_H
+#define _DPU_6_4_SM6350_H
+
+static const struct dpu_caps sm6350_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0x7,
+ .qseed_type = DPU_SSPP_SCALER_QSEED4,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_ubwc_cfg sm6350_ubwc_cfg = {
+ .ubwc_version = DPU_HW_UBWC_VER_20,
+ .ubwc_swizzle = 6,
+ .highest_bank_bit = 1,
+};
+
+static const struct dpu_mdp_cfg sm6350_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+ },
+};
+
+static const struct dpu_ctl_cfg sm6350_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x1000, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x1200, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x1400, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x1600, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+};
+
+static const struct dpu_sspp_cfg sm6350_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
+ sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
+};
+
+static const struct dpu_lm_cfg sm6350_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
+};
+
+static const struct dpu_dspp_cfg sm6350_dspp[] = {
+ DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+ &sm8150_dspp_sblk),
+};
+
+static struct dpu_pingpong_cfg sm6350_pp[] = {
+ PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ -1),
+ PP_BLK("pingpong_1", PINGPONG_1, 0x70800, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ -1),
+};
+
+static const struct dpu_dsc_cfg sm6350_dsc[] = {
+ DSC_BLK("dsc_0", DSC_0, 0x80000, BIT(DPU_DSC_OUTPUT_CTRL)),
+};
+
+static const struct dpu_intf_cfg sm6350_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x6a000, 0x280, INTF_DP, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25)),
+ INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+ DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
+};
+
+static const struct dpu_perf_cfg sm6350_perf_data = {
+ .max_bw_low = 4200000,
+ .max_bw_high = 5100000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 1600000,
+ .min_prefill_lines = 35,
+ /* TODO: confirm danger_lut_tbl */
+ .danger_lut_tbl = {0xffff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+const struct dpu_mdss_cfg dpu_sm6350_cfg = {
+ .caps = &sm6350_dpu_caps,
+ .ubwc = &sm6350_ubwc_cfg,
+ .mdp_count = ARRAY_SIZE(sm6350_mdp),
+ .mdp = sm6350_mdp,
+ .ctl_count = ARRAY_SIZE(sm6350_ctl),
+ .ctl = sm6350_ctl,
+ .sspp_count = ARRAY_SIZE(sm6350_sspp),
+ .sspp = sm6350_sspp,
+ .mixer_count = ARRAY_SIZE(sm6350_lm),
+ .mixer = sm6350_lm,
+ .dspp_count = ARRAY_SIZE(sm6350_dspp),
+ .dspp = sm6350_dspp,
+ .dsc_count = ARRAY_SIZE(sm6350_dsc),
+ .dsc = sm6350_dsc,
+ .pingpong_count = ARRAY_SIZE(sm6350_pp),
+ .pingpong = sm6350_pp,
+ .intf_count = ARRAY_SIZE(sm6350_intf),
+ .intf = sm6350_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sm6350_perf_data,
+ .mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_INTR) | \
+ BIT(MDP_INTF1_INTR) | \
+ BIT(MDP_INTF1_TEAR_INTR),
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f07eab738008..8bf6562f39e8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -689,6 +689,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222335777},
};
+static const struct dpu_qos_lut_entry sm6350_qos_linear_macrotile[] = {
+ {.fl = 0, .lut = 0x0011223445566777 },
+};
+
static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222223357 },
};
@@ -744,6 +748,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
#include "catalog/dpu_6_0_sm8250.h"
#include "catalog/dpu_6_2_sc7180.h"
#include "catalog/dpu_6_3_sm6115.h"
+#include "catalog/dpu_6_4_sm6350.h"
#include "catalog/dpu_6_5_qcm2290.h"
#include "catalog/dpu_7_0_sm8350.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index d59a9027c4b6..e89edbe0ab98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -832,6 +832,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
+extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 613384b8ca0e..190345e94178 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1305,6 +1305,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
{ .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
{ .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
+ { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
{ .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
{ .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
--
2.40.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
iommu@lists.linux.dev,
Marijn Suijten <marijn.suijten@somainline.org>,
freedreno@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 06/12] drm/msm/dpu: Add SM6350 support
Date: Tue, 06 Jun 2023 14:43:57 +0200 [thread overview]
Message-ID: <20230411-topic-straitlagoon_mdss-v6-6-dee6a882571b@linaro.org> (raw)
In-Reply-To: <20230411-topic-straitlagoon_mdss-v6-0-dee6a882571b@linaro.org>
Add SM6350 support to the DPU1 driver to enable display output.
It's worth noting that one entry dpu_qos_lut_entry was trimmed off:
{.fl = 0, .lut = 0x0011223344556677 },
due to the lack of support for selecting between portrait and landscape
LUT settings (for danger and safe LUTs) and no full support for
qseed/non-qseed usescases (for QoS LUT).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h | 173 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 180 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
new file mode 100644
index 000000000000..06eba23b0236
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DPU_6_4_SM6350_H
+#define _DPU_6_4_SM6350_H
+
+static const struct dpu_caps sm6350_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0x7,
+ .qseed_type = DPU_SSPP_SCALER_QSEED4,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_ubwc_cfg sm6350_ubwc_cfg = {
+ .ubwc_version = DPU_HW_UBWC_VER_20,
+ .ubwc_swizzle = 6,
+ .highest_bank_bit = 1,
+};
+
+static const struct dpu_mdp_cfg sm6350_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+ },
+};
+
+static const struct dpu_ctl_cfg sm6350_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x1000, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x1200, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x1400, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x1600, .len = 0x1dc,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+};
+
+static const struct dpu_sspp_cfg sm6350_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
+ sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
+};
+
+static const struct dpu_lm_cfg sm6350_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
+ &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
+};
+
+static const struct dpu_dspp_cfg sm6350_dspp[] = {
+ DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+ &sm8150_dspp_sblk),
+};
+
+static struct dpu_pingpong_cfg sm6350_pp[] = {
+ PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ -1),
+ PP_BLK("pingpong_1", PINGPONG_1, 0x70800, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ -1),
+};
+
+static const struct dpu_dsc_cfg sm6350_dsc[] = {
+ DSC_BLK("dsc_0", DSC_0, 0x80000, BIT(DPU_DSC_OUTPUT_CTRL)),
+};
+
+static const struct dpu_intf_cfg sm6350_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x6a000, 0x280, INTF_DP, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25)),
+ INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 35, INTF_SC7180_MASK,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+ DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
+};
+
+static const struct dpu_perf_cfg sm6350_perf_data = {
+ .max_bw_low = 4200000,
+ .max_bw_high = 5100000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 1600000,
+ .min_prefill_lines = 35,
+ /* TODO: confirm danger_lut_tbl */
+ .danger_lut_tbl = {0xffff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+ .entries = sm6350_qos_linear_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+const struct dpu_mdss_cfg dpu_sm6350_cfg = {
+ .caps = &sm6350_dpu_caps,
+ .ubwc = &sm6350_ubwc_cfg,
+ .mdp_count = ARRAY_SIZE(sm6350_mdp),
+ .mdp = sm6350_mdp,
+ .ctl_count = ARRAY_SIZE(sm6350_ctl),
+ .ctl = sm6350_ctl,
+ .sspp_count = ARRAY_SIZE(sm6350_sspp),
+ .sspp = sm6350_sspp,
+ .mixer_count = ARRAY_SIZE(sm6350_lm),
+ .mixer = sm6350_lm,
+ .dspp_count = ARRAY_SIZE(sm6350_dspp),
+ .dspp = sm6350_dspp,
+ .dsc_count = ARRAY_SIZE(sm6350_dsc),
+ .dsc = sm6350_dsc,
+ .pingpong_count = ARRAY_SIZE(sm6350_pp),
+ .pingpong = sm6350_pp,
+ .intf_count = ARRAY_SIZE(sm6350_intf),
+ .intf = sm6350_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sm6350_perf_data,
+ .mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_INTR) | \
+ BIT(MDP_INTF1_INTR) | \
+ BIT(MDP_INTF1_TEAR_INTR),
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f07eab738008..8bf6562f39e8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -689,6 +689,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222335777},
};
+static const struct dpu_qos_lut_entry sm6350_qos_linear_macrotile[] = {
+ {.fl = 0, .lut = 0x0011223445566777 },
+};
+
static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
{.fl = 0, .lut = 0x0011222222223357 },
};
@@ -744,6 +748,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
#include "catalog/dpu_6_0_sm8250.h"
#include "catalog/dpu_6_2_sc7180.h"
#include "catalog/dpu_6_3_sm6115.h"
+#include "catalog/dpu_6_4_sm6350.h"
#include "catalog/dpu_6_5_qcm2290.h"
#include "catalog/dpu_7_0_sm8350.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index d59a9027c4b6..e89edbe0ab98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -832,6 +832,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
+extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 613384b8ca0e..190345e94178 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1305,6 +1305,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
{ .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
{ .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
+ { .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
{ .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
{ .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
--
2.40.1
next prev parent reply other threads:[~2023-06-06 12:45 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 12:43 [PATCH v6 00/12] SM63(50|75) DPU support Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 01/12] dt-bindings: display/msm: dsi-controller-main: Add SM6350 Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 02/12] dt-bindings: display/msm: dsi-controller-main: Add SM6375 Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375 Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 04/12] dt-bindings: display/msm: Add SM6350 MDSS Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-06 12:43 ` [PATCH v6 05/12] dt-bindings: display/msm: Add SM6375 MDSS Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-07 18:11 ` Krzysztof Kozlowski
2023-06-06 12:43 ` Konrad Dybcio [this message]
2023-06-06 12:43 ` [PATCH v6 06/12] drm/msm/dpu: Add SM6350 support Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 07/12] drm/msm: mdss: " Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` [PATCH v6 08/12] drm/msm/dpu: Add SM6375 support Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:43 ` Konrad Dybcio
2023-06-06 12:44 ` [PATCH v6 09/12] drm/msm: mdss: " Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-06 12:44 ` [PATCH v6 10/12] iommu/arm-smmu-qcom: Sort the compatible list alphabetically Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-08 21:02 ` Will Deacon
2023-06-08 21:02 ` Will Deacon
2023-06-08 21:02 ` Will Deacon
2023-06-06 12:44 ` [PATCH v6 11/12] iommu/arm-smmu-qcom: Add SM6375 DPU compatible Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-08 21:02 ` Will Deacon
2023-06-08 21:02 ` Will Deacon
2023-06-08 21:02 ` Will Deacon
2023-06-06 12:44 ` [PATCH v6 12/12] iommu/arm-smmu-qcom: Add SM6350 " Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-06 12:44 ` Konrad Dybcio
2023-06-08 21:03 ` Will Deacon
2023-06-08 21:03 ` Will Deacon
2023-06-08 21:03 ` Will Deacon
2023-06-07 23:20 ` [PATCH v6 00/12] SM63(50|75) DPU support Dmitry Baryshkov
2023-06-07 23:20 ` Dmitry Baryshkov
2023-06-07 23:20 ` Dmitry Baryshkov
2023-06-07 23:39 ` Dmitry Baryshkov
2023-06-07 23:39 ` Dmitry Baryshkov
2023-06-07 23:39 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230411-topic-straitlagoon_mdss-v6-6-dee6a882571b@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_mkrishn@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=sean@poorly.run \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.