[PATCH v2 2/6] arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node

From: Neil Armstrong <neil.armstrong@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 2/6] arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
Date: Wed, 10 May 2023 10:31:40 +0200	[thread overview]
Message-ID: <20230503-topic-sm8450-graphics-dp-next-v2-2-8acbbe1e9d14@linaro.org> (raw)
In-Reply-To: <20230503-topic-sm8450-graphics-dp-next-v2-0-8acbbe1e9d14@linaro.org>

Add the USB3+DP Combo QMP PHY port subnodes in the SM8450 SoC DTSI
to avoid duplication in the devices DTs.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533aeafc4..6de3327d9b32 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2044,6 +2044,32 @@ usb_1_qmpphy: phy@88e8000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		remoteproc_slpi: remoteproc@2400000 {

-- 
2.34.1

