[PATCH v2 4/6] arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph

From: Neil Armstrong <neil.armstrong@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 4/6] arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
Date: Wed, 10 May 2023 10:31:42 +0200	[thread overview]
Message-ID: <20230503-topic-sm8450-graphics-dp-next-v2-4-8acbbe1e9d14@linaro.org> (raw)
In-Reply-To: <20230503-topic-sm8450-graphics-dp-next-v2-0-8acbbe1e9d14@linaro.org>

With support for the QMP combo phy to react to USB Type-C switch events,
introduce it as the next hop for the SuperSpeed lanes of the Type-C
connector, and connect the output of the DisplayPort controller
to the QMP combo phy.

This allows the TCPM to perform orientation switching of both USB and
DisplayPort signals.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 73 ++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index e931545a2cac..d5aeb7319776 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -114,9 +114,18 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&usb_1_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+
 			};
 		};
 	};
@@ -494,6 +503,37 @@ lt9611_out: endpoint {
 	};
 };
 
+&i2c5 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				fsa4480_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+		};
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -513,6 +553,21 @@ &mdss_dsi0_phy {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp0_out: endpoint {
+				data-lanes = <0 1>;
+				remote-endpoint = <&usb_1_qmpphy_dp_in>;
+			};
+		};
+	};
+};
+
 &mdss_mdp {
 	status = "okay";
 };
@@ -766,7 +821,7 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -782,6 +837,20 @@ &usb_1_qmpphy {
 
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
+
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
 };
 
 &vamacro {

-- 
2.34.1

