All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
	Jason Wang <jasowang@redhat.com>
Subject: [PULL 28/50] igb: Clear EICR bits for delayed MSI-X interrupts
Date: Tue, 23 May 2023 15:32:16 +0800	[thread overview]
Message-ID: <20230523073238.54236-29-jasowang@redhat.com> (raw)
In-Reply-To: <20230523073238.54236-1-jasowang@redhat.com>

From: Akihiko Odaki <akihiko.odaki@daynix.com>

Section 7.3.4.1 says:
> When auto-clear is enabled for an interrupt cause, the EICR bit is
> set when a cause event mapped to this vector occurs. When the EITR
> Counter reaches zero, the MSI-X message is sent on PCIe. Then the
> EICR bit is cleared and enabled to be set by a new cause event

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/igb_core.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/hw/net/igb_core.c b/hw/net/igb_core.c
index 20645c4..edda07e 100644
--- a/hw/net/igb_core.c
+++ b/hw/net/igb_core.c
@@ -97,23 +97,31 @@ igb_lower_legacy_irq(IGBCore *core)
     pci_set_irq(core->owner, 0);
 }
 
-static void igb_msix_notify(IGBCore *core, unsigned int vector)
+static void igb_msix_notify(IGBCore *core, unsigned int cause)
 {
     PCIDevice *dev = core->owner;
     uint16_t vfn;
+    uint32_t effective_eiac;
+    unsigned int vector;
 
-    vfn = 8 - (vector + 2) / IGBVF_MSIX_VEC_NUM;
+    vfn = 8 - (cause + 2) / IGBVF_MSIX_VEC_NUM;
     if (vfn < pcie_sriov_num_vfs(core->owner)) {
         dev = pcie_sriov_get_vf_at_index(core->owner, vfn);
         assert(dev);
-        vector = (vector + 2) % IGBVF_MSIX_VEC_NUM;
-    } else if (vector >= IGB_MSIX_VEC_NUM) {
+        vector = (cause + 2) % IGBVF_MSIX_VEC_NUM;
+    } else if (cause >= IGB_MSIX_VEC_NUM) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "igb: Tried to use vector unavailable for PF");
         return;
+    } else {
+        vector = cause;
     }
 
     msix_notify(dev, vector);
+
+    trace_e1000e_irq_icr_clear_eiac(core->mac[EICR], core->mac[EIAC]);
+    effective_eiac = core->mac[EIAC] & BIT(cause);
+    core->mac[EICR] &= ~effective_eiac;
 }
 
 static inline void
@@ -1834,7 +1842,6 @@ igb_eitr_should_postpone(IGBCore *core, int idx)
 static void igb_send_msix(IGBCore *core)
 {
     uint32_t causes = core->mac[EICR] & core->mac[EIMS];
-    uint32_t effective_eiac;
     int vector;
 
     for (vector = 0; vector < IGB_INTR_NUM; ++vector) {
@@ -1842,10 +1849,6 @@ static void igb_send_msix(IGBCore *core)
 
             trace_e1000e_irq_msix_notify_vec(vector);
             igb_msix_notify(core, vector);
-
-            trace_e1000e_irq_icr_clear_eiac(core->mac[EICR], core->mac[EIAC]);
-            effective_eiac = core->mac[EIAC] & BIT(vector);
-            core->mac[EICR] &= ~effective_eiac;
         }
     }
 }
-- 
2.7.4



  parent reply	other threads:[~2023-05-23  7:35 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23  7:31 [PULL 00/50] Net patches Jason Wang
2023-05-23  7:31 ` [PULL 01/50] e1000e: Fix tx/rx counters Jason Wang
2023-05-23  7:31 ` [PULL 02/50] hw/net/net_tx_pkt: Decouple implementation from PCI Jason Wang
2023-05-23  7:31 ` [PULL 03/50] hw/net/net_tx_pkt: Decouple interface " Jason Wang
2023-05-23  7:31 ` [PULL 04/50] e1000x: Fix BPRC and MPRC Jason Wang
2023-05-23  7:31 ` [PULL 05/50] igb: Fix Rx packet type encoding Jason Wang
2023-05-23  7:31 ` [PULL 06/50] igb: Do not require CTRL.VME for tx VLAN tagging Jason Wang
2023-05-23  7:31 ` [PULL 07/50] igb: Clear IMS bits when committing ICR access Jason Wang
2023-05-23  7:31 ` [PULL 08/50] net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols() Jason Wang
2023-05-23  7:31 ` [PULL 09/50] e1000e: Always copy ethernet header Jason Wang
2023-05-23  7:31 ` [PULL 10/50] igb: " Jason Wang
2023-05-23  7:31 ` [PULL 11/50] Fix references to igb Avocado test Jason Wang
2023-05-23  7:32 ` [PULL 12/50] tests/avocado: Remove unused imports Jason Wang
2023-05-23  7:32 ` [PULL 13/50] tests/avocado: Remove test_igb_nomsi_kvm Jason Wang
2023-05-23  7:32 ` [PULL 14/50] hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_info Jason Wang
2023-05-23  7:32 ` [PULL 15/50] net/eth: Rename eth_setup_vlan_headers_ex Jason Wang
2023-05-23  7:32 ` [PULL 16/50] e1000x: Share more Rx filtering logic Jason Wang
2023-05-23  7:32 ` [PULL 17/50] e1000x: Take CRC into consideration for size check Jason Wang
2023-05-23  7:32 ` [PULL 18/50] e1000x: Rename TcpIpv6 into TcpIpv6Ex Jason Wang
2023-05-23  7:32 ` [PULL 19/50] e1000e: Always log status after building rx metadata Jason Wang
2023-05-23  7:32 ` [PULL 20/50] igb: " Jason Wang
2023-05-23  7:32 ` [PULL 21/50] igb: Remove goto Jason Wang
2023-05-23  7:32 ` [PULL 22/50] igb: Read DCMD.VLE of the first Tx descriptor Jason Wang
2023-05-23  7:32 ` [PULL 23/50] e1000e: Reset packet state after emptying Tx queue Jason Wang
2023-05-23  7:32 ` [PULL 24/50] vmxnet3: " Jason Wang
2023-05-23  7:32 ` [PULL 25/50] igb: Add more definitions for Tx descriptor Jason Wang
2023-05-23  7:32 ` [PULL 26/50] igb: Share common VF constants Jason Wang
2023-05-23  7:32 ` [PULL 27/50] igb: Fix igb_mac_reg_init coding style alignment Jason Wang
2023-05-23  7:32 ` Jason Wang [this message]
2023-05-23  7:32 ` [PULL 29/50] e1000e: Rename a variable in e1000e_receive_internal() Jason Wang
2023-05-23  7:32 ` [PULL 30/50] igb: Rename a variable in igb_receive_internal() Jason Wang
2023-05-23  7:32 ` [PULL 31/50] net/eth: Use void pointers Jason Wang
2023-05-23  7:32 ` [PULL 32/50] net/eth: Always add VLAN tag Jason Wang
2023-05-23  7:32 ` [PULL 33/50] hw/net/net_rx_pkt: Enforce alignment for eth_header Jason Wang
2023-05-23  7:32 ` [PULL 34/50] tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX Jason Wang
2023-05-23  7:32 ` [PULL 35/50] igb: Implement MSI-X single vector mode Jason Wang
2023-05-23  7:32 ` [PULL 36/50] igb: Use UDP for RSS hash Jason Wang
2023-05-23  7:32 ` [PULL 37/50] igb: Implement Rx SCTP CSO Jason Wang
2023-05-23  7:32 ` [PULL 38/50] igb: Implement Tx " Jason Wang
2023-05-23  7:32 ` [PULL 39/50] igb: Strip the second VLAN tag for extended VLAN Jason Wang
2023-05-23  7:32 ` [PULL 40/50] igb: Filter with " Jason Wang
2023-05-23  7:32 ` [PULL 41/50] igb: Implement igb-specific oversize check Jason Wang
2023-05-23  7:32 ` [PULL 42/50] igb: Implement Rx PTP2 timestamp Jason Wang
2023-05-23  7:32 ` [PULL 43/50] igb: Implement Tx timestamp Jason Wang
2023-05-23  7:32 ` [PULL 44/50] e1000e: Notify only new interrupts Jason Wang
2023-05-23  7:32 ` [PULL 45/50] igb: " Jason Wang
2023-05-23  7:32 ` [PULL 46/50] igb: Clear-on-read ICR when ICR.INTA is set Jason Wang
2023-05-23  7:32 ` [PULL 47/50] vmxnet3: Do not depend on PC Jason Wang
2023-05-23  7:32 ` [PULL 48/50] MAINTAINERS: Add a reviewer for network packet abstractions Jason Wang
2023-05-23  7:32 ` [PULL 49/50] docs/system/devices/igb: Note igb is tested for DPDK Jason Wang
2023-05-23  7:32 ` [PULL 50/50] rtl8139: fix large_send_mss divide-by-zero Jason Wang
2023-05-23 17:56 ` [PULL 00/50] Net patches Richard Henderson
2023-05-23 19:53 ` Michael Tokarev
2023-05-24  4:06   ` Jason Wang
2023-05-24  4:21     ` Akihiko Odaki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230523073238.54236-29-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=akihiko.odaki@daynix.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.