All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Sudeep Holla <sudeep.holla@arm.com>,
	Cristian Marussi <cristian.marussi@arm.com>,
	Viresh Kumar <vireshk@kernel.org>,
	"Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Stephen Boyd <sboyd@kernel.org>,
	Nikunj Kela <nkela@quicinc.com>,
	Prasad Sodagudi <psodagud@quicinc.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 6/9] OPP: Extend support for the opp-level beyond required-opps
Date: Mon, 25 Sep 2023 15:17:12 +0200	[thread overview]
Message-ID: <20230925131715.138411-7-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20230925131715.138411-1-ulf.hansson@linaro.org>

At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain.  Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.

To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/opp/core.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 60dca60ac4af..afb73978cdcb 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1107,6 +1107,22 @@ void _update_set_required_opps(struct opp_table *opp_table)
 		opp_table->set_required_opps = _opp_set_required_opps_generic;
 }
 
+static int _set_opp_level(struct device *dev, struct opp_table *opp_table,
+			  struct dev_pm_opp *opp)
+{
+	int ret = 0;
+
+	/* Request a new performance state through the device's PM domain. */
+	if (opp && opp->level) {
+		ret = dev_pm_domain_set_performance_state(dev, opp->level);
+		if (ret)
+			dev_err(dev, "Failed to set performance state %u (%d)\n",
+				opp->level, ret);
+	}
+
+	return ret;
+}
+
 static void _find_current_opp(struct device *dev, struct opp_table *opp_table)
 {
 	struct dev_pm_opp *opp = ERR_PTR(-ENODEV);
@@ -1154,8 +1170,13 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
 	if (opp_table->regulators)
 		regulator_disable(opp_table->regulators[0]);
 
+	ret = _set_opp_level(dev, opp_table, NULL);
+	if (ret)
+		goto out;
+
 	ret = _set_required_opps(dev, opp_table, NULL, false);
 
+out:
 	opp_table->enabled = false;
 	return ret;
 }
@@ -1198,6 +1219,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 			return ret;
 		}
 
+		ret = _set_opp_level(dev, opp_table, opp);
+		if (ret)
+			return ret;
+
 		ret = _set_opp_bw(opp_table, opp, dev);
 		if (ret) {
 			dev_err(dev, "Failed to set bw: %d\n", ret);
@@ -1241,6 +1266,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 			return ret;
 		}
 
+		ret = _set_opp_level(dev, opp_table, opp);
+		if (ret)
+			return ret;
+
 		ret = _set_required_opps(dev, opp_table, opp, false);
 		if (ret) {
 			dev_err(dev, "Failed to set required opps: %d\n", ret);
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Sudeep Holla <sudeep.holla@arm.com>,
	Cristian Marussi <cristian.marussi@arm.com>,
	Viresh Kumar <vireshk@kernel.org>,
	"Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Stephen Boyd <sboyd@kernel.org>,
	Nikunj Kela <nkela@quicinc.com>,
	Prasad Sodagudi <psodagud@quicinc.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 6/9] OPP: Extend support for the opp-level beyond required-opps
Date: Mon, 25 Sep 2023 15:17:12 +0200	[thread overview]
Message-ID: <20230925131715.138411-7-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20230925131715.138411-1-ulf.hansson@linaro.org>

At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain.  Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.

To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/opp/core.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 60dca60ac4af..afb73978cdcb 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1107,6 +1107,22 @@ void _update_set_required_opps(struct opp_table *opp_table)
 		opp_table->set_required_opps = _opp_set_required_opps_generic;
 }
 
+static int _set_opp_level(struct device *dev, struct opp_table *opp_table,
+			  struct dev_pm_opp *opp)
+{
+	int ret = 0;
+
+	/* Request a new performance state through the device's PM domain. */
+	if (opp && opp->level) {
+		ret = dev_pm_domain_set_performance_state(dev, opp->level);
+		if (ret)
+			dev_err(dev, "Failed to set performance state %u (%d)\n",
+				opp->level, ret);
+	}
+
+	return ret;
+}
+
 static void _find_current_opp(struct device *dev, struct opp_table *opp_table)
 {
 	struct dev_pm_opp *opp = ERR_PTR(-ENODEV);
@@ -1154,8 +1170,13 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
 	if (opp_table->regulators)
 		regulator_disable(opp_table->regulators[0]);
 
+	ret = _set_opp_level(dev, opp_table, NULL);
+	if (ret)
+		goto out;
+
 	ret = _set_required_opps(dev, opp_table, NULL, false);
 
+out:
 	opp_table->enabled = false;
 	return ret;
 }
@@ -1198,6 +1219,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 			return ret;
 		}
 
+		ret = _set_opp_level(dev, opp_table, opp);
+		if (ret)
+			return ret;
+
 		ret = _set_opp_bw(opp_table, opp, dev);
 		if (ret) {
 			dev_err(dev, "Failed to set bw: %d\n", ret);
@@ -1241,6 +1266,10 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 			return ret;
 		}
 
+		ret = _set_opp_level(dev, opp_table, opp);
+		if (ret)
+			return ret;
+
 		ret = _set_required_opps(dev, opp_table, opp, false);
 		if (ret) {
 			dev_err(dev, "Failed to set required opps: %d\n", ret);
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-09-25 13:18 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-25 13:17 [PATCH 0/9] PM: domains/opp/arm_scmi: Extend performance scaling support Ulf Hansson
2023-09-25 13:17 ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 1/9] PM: domains: Introduce dev_pm_domain_set_performance_state() Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 2/9] PM: domains: Implement the ->set_performance_state() callback for genpd Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 3/9] OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 4/9] OPP: Extend dev_pm_opp_data with a level Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 5/9] OPP: Switch to use dev_pm_domain_set_performance_state() Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` Ulf Hansson [this message]
2023-09-25 13:17   ` [PATCH 6/9] OPP: Extend support for the opp-level beyond required-opps Ulf Hansson
2023-09-25 13:33   ` Ulf Hansson
2023-09-25 13:33     ` Ulf Hansson
2023-10-03  8:23     ` Viresh Kumar
2023-10-03  8:23       ` Viresh Kumar
2023-10-03 12:36       ` Ulf Hansson
2023-10-03 12:36         ` Ulf Hansson
2023-10-04  5:04         ` Viresh Kumar
2023-10-04  5:04           ` Viresh Kumar
2023-10-04  9:06           ` Ulf Hansson
2023-10-04  9:06             ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 7/9] firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add() Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 8/9] firmware: arm_scmi: Specify the performance level when adding an OPP Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-25 13:17 ` [PATCH 9/9] firmware: arm_scmi: Add generic OPP support to the SCMI performance domain Ulf Hansson
2023-09-25 13:17   ` Ulf Hansson
2023-09-29 16:25   ` Sudeep Holla
2023-09-29 16:25     ` Sudeep Holla
2023-10-03  8:21     ` Viresh Kumar
2023-10-03  8:21       ` Viresh Kumar
2023-10-03 11:26       ` Sudeep Holla
2023-10-03 11:26         ` Sudeep Holla
2023-10-04  5:08         ` Viresh Kumar
2023-10-04  5:08           ` Viresh Kumar
2023-10-05 15:06           ` Sudeep Holla
2023-10-05 15:06             ` Sudeep Holla
2023-10-06  7:09             ` Viresh Kumar
2023-10-06  7:09               ` Viresh Kumar
2023-10-06  9:43               ` Sudeep Holla
2023-10-06  9:43                 ` Sudeep Holla
2023-09-26 16:54 ` [PATCH 0/9] PM: domains/opp/arm_scmi: Extend performance scaling support Rafael J. Wysocki
2023-09-26 16:54   ` Rafael J. Wysocki
2023-10-06 14:30 ` (subset) " Sudeep Holla
2023-10-06 14:30   ` Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230925131715.138411-7-ulf.hansson@linaro.org \
    --to=ulf.hansson@linaro.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=cristian.marussi@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nkela@quicinc.com \
    --cc=nm@ti.com \
    --cc=psodagud@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.