[PATCH 10/14] spi: axi-spi-engine: use message_prepare/unprepare

From: David Lechner <dlechner@baylibre.com>
To: linux-spi@vger.kernel.org, devicetree@vger.kernel.org
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 10/14] spi: axi-spi-engine: use message_prepare/unprepare
Date: Fri, 17 Nov 2023 14:13:01 -0600	[thread overview]
Message-ID: <20231117-axi-spi-engine-series-1-v1-10-cc59db999b87@baylibre.com> (raw)
In-Reply-To: <20231117-axi-spi-engine-series-1-v1-0-cc59db999b87@baylibre.com>

This modifies the AXI SPI Engine driver to make use of the
message_prepare and message_unprepare callbacks. This separates
the concerns of allocating and freeing the message state from the
transfer_one_message callback.

The main benfit of this is so that future callers of
spi_finalize_current_message() will not have to do manual cleanup
of the state.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/spi/spi-axi-spi-engine.c | 46 +++++++++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 745000a9b2c7..210bea23f433 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -412,11 +412,7 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 
 		if (spi_engine->completed_id == st->sync_id) {
 			struct spi_message *msg = spi_engine->msg;
-			struct spi_engine_message_state *st = msg->state;
 
-			ida_free(&spi_engine->sync_ida, st->sync_id);
-			kfree(st->p);
-			kfree(st);
 			msg->status = 0;
 			msg->actual_length = msg->frame_length;
 			spi_engine->msg = NULL;
@@ -436,14 +432,12 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static int spi_engine_transfer_one_message(struct spi_controller *host,
-	struct spi_message *msg)
+static int spi_engine_prepare_message(struct spi_controller *host,
+				      struct spi_message *msg)
 {
 	struct spi_engine_program p_dry, *p;
 	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
 	struct spi_engine_message_state *st;
-	unsigned int int_enable = 0;
-	unsigned long flags;
 	size_t size;
 	int ret;
 
@@ -472,15 +466,41 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
 
 	spi_engine_compile_message(spi_engine, msg, false, p);
 
-	spin_lock_irqsave(&spi_engine->lock, flags);
 	spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC(st->sync_id));
 
-	msg->state = st;
-	spi_engine->msg = msg;
 	st->p = p;
-
 	st->cmd_buf = p->instructions;
 	st->cmd_length = p->length;
+	msg->state = st;
+
+	return 0;
+}
+
+static int spi_engine_unprepare_message(struct spi_controller *host,
+					struct spi_message *msg)
+{
+	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
+	struct spi_engine_message_state *st = msg->state;
+
+	ida_free(&spi_engine->sync_ida, st->sync_id);
+	kfree(st->p);
+	kfree(st);
+
+	return 0;
+}
+
+static int spi_engine_transfer_one_message(struct spi_controller *host,
+	struct spi_message *msg)
+{
+	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
+	struct spi_engine_message_state *st = msg->state;
+	unsigned int int_enable = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi_engine->lock, flags);
+
+	spi_engine->msg = msg;
+
 	if (spi_engine_write_cmd_fifo(spi_engine))
 		int_enable |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
 
@@ -572,6 +592,8 @@ static int spi_engine_probe(struct platform_device *pdev)
 	host->bits_per_word_mask = SPI_BPW_MASK(8);
 	host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
 	host->transfer_one_message = spi_engine_transfer_one_message;
+	host->prepare_message = spi_engine_prepare_message;
+	host->unprepare_message = spi_engine_unprepare_message;
 	host->num_chipselect = 8;
 
 	if (host->max_speed_hz == 0)

-- 
2.42.0

