From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
arm@kernel.org, soc@kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Peter Griffin <peter.griffin@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [GIT PULL 2/2] arm64: dts: samsung: DTS for v6.8, part two
Date: Wed, 20 Dec 2023 09:47:22 +0100 [thread overview]
Message-ID: <20231220084722.22149-2-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20231220084722.22149-1-krzysztof.kozlowski@linaro.org>
Hi,
This is second pull request for arm64 Samsung DTS. Previous (part one):
https://lore.kernel.org/all/20231212093105.13938-1-krzysztof.kozlowski@linaro.org/
I did not receive any notification that you pulled in previous (part one) pull,
thus I attach below two diffs:
A. Against previous pull, tags/samsung-dt64-6.8
B. Against master, v6.7-rc1
This includes topic branch, see explanation in pull-request/tag. Most of the
bindings patches affect DTS, because they include compatible-refactoring. This
refactoring affects new device support - ExynosAutov920 and Google GS101 -
thus everything comes together.
Best regards,
Krzysztof
The following changes since commit 40af852a7ca59d23ab4afd02af2623121da2f116:
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 (2023-12-11 08:41:24 +0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.8-2
for you to fetch changes up to d0da0de31e1d50ff905eb8f095628eea666f8c67:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT (2023-12-18 11:15:51 +0100)
----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
----------------------------------------------------------------
Aakarsh Jain (1):
arm64: dts: fsd: Add MFC related DT enteries
Lukas Bulwahn (1):
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
Peter Griffin (4):
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: exynos: google: Add initial Google gs101 SoC support
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
MAINTAINERS: add entry for Google Tensor SoC
Documentation/devicetree/bindings/arm/google.yaml | 53 +
MAINTAINERS | 10 +
arch/arm64/boot/dts/exynos/Makefile | 2 +
arch/arm64/boot/dts/exynos/google/Makefile | 4 +
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 105 ++
.../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1249 ++++++++++++++++++++
arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h | 33 +
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 473 ++++++++
arch/arm64/boot/dts/tesla/fsd.dtsi | 21 +
9 files changed, 1950 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/google.yaml
create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
----------------------------------------------------------------
----------------------------------------------------------------
DIFF against master/v6.7-rc1
----------------------------------------------------------------
The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:
Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.8-2
for you to fetch changes up to d0da0de31e1d50ff905eb8f095628eea666f8c67:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT (2023-12-18 11:15:51 +0100)
----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
----------------------------------------------------------------
Aakarsh Jain (1):
arm64: dts: fsd: Add MFC related DT enteries
Jaewon Kim (10):
arm64: dts: exynos: add gpio-key node for exynosautov9-sadk
dt-bindings: samsung: exynos-sysreg: add exynosautov920 sysreg
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
arm64: dts: exynos: add initial support for exynosautov920 SoC
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
Krzysztof Kozlowski (28):
dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
dt-bindings: serial: samsung: add specific compatibles for existing SoC
dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
dt-bindings: pwm: samsung: add specific compatibles for existing SoC
arm64: dts: exynos5433: add specific compatibles to several blocks
arm64: dts: exynos7: add specific compatibles to several blocks
arm64: dts: exynos7885: add specific compatibles to several blocks
arm64: dts: exynos850: add specific compatibles to several blocks
arm64: dts: exynosautov9: add specific compatibles to several blocks
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
Lukas Bulwahn (1):
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
Peter Griffin (7):
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: exynos: google: Add initial Google gs101 SoC support
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
MAINTAINERS: add entry for Google Tensor SoC
Documentation/devicetree/bindings/arm/google.yaml | 53 +
.../bindings/arm/samsung/samsung-boards.yaml | 6 +
.../bindings/clock/google,gs101-clock.yaml | 106 ++
.../devicetree/bindings/gpu/arm,mali-midgard.yaml | 5 +
.../bindings/hwinfo/samsung,exynos-chipid.yaml | 18 +-
.../devicetree/bindings/i2c/i2c-exynos5.yaml | 11 +-
.../bindings/i2c/samsung,s3c2410-i2c.yaml | 22 +-
.../bindings/iio/adc/samsung,exynos-adc.yaml | 29 +-
.../bindings/mfd/samsung,exynos5433-lpass.yaml | 2 +-
.../bindings/mmc/samsung,exynos-dw-mshc.yaml | 25 +-
.../devicetree/bindings/pwm/pwm-samsung.yaml | 4 +
Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 5 +
.../devicetree/bindings/serial/samsung_uart.yaml | 17 +-
.../bindings/soc/samsung/exynos-pmu.yaml | 10 +
.../bindings/soc/samsung/exynos-usi.yaml | 6 +-
.../soc/samsung/samsung,exynos-sysreg.yaml | 5 +
.../devicetree/bindings/sound/samsung-i2s.yaml | 19 +-
.../devicetree/bindings/watchdog/samsung-wdt.yaml | 21 +-
MAINTAINERS | 10 +
arch/arm64/boot/dts/exynos/Makefile | 5 +-
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 60 +-
arch/arm64/boot/dts/exynos/exynos7.dtsi | 18 +-
arch/arm64/boot/dts/exynos/exynos7885.dtsi | 45 +-
arch/arm64/boot/dts/exynos/exynos850.dtsi | 40 +-
arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts | 51 +
arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 10 +-
.../boot/dts/exynos/exynosautov920-pinctrl.dtsi | 1266 ++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts | 88 ++
arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 312 +++++
arch/arm64/boot/dts/exynos/google/Makefile | 4 +
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 105 ++
.../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1249 +++++++++++++++++++
arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h | 33 +
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 473 ++++++++
arch/arm64/boot/dts/tesla/fsd.dtsi | 53 +-
include/dt-bindings/clock/google,gs101.h | 392 ++++++
36 files changed, 4444 insertions(+), 134 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/google.yaml
create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
create mode 100644 include/dt-bindings/clock/google,gs101.h
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
arm@kernel.org, soc@kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Peter Griffin <peter.griffin@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [GIT PULL 2/2] arm64: dts: samsung: DTS for v6.8, part two
Date: Wed, 20 Dec 2023 09:47:22 +0100 [thread overview]
Message-ID: <20231220084722.22149-2-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20231220084722.22149-1-krzysztof.kozlowski@linaro.org>
Hi,
This is second pull request for arm64 Samsung DTS. Previous (part one):
https://lore.kernel.org/all/20231212093105.13938-1-krzysztof.kozlowski@linaro.org/
I did not receive any notification that you pulled in previous (part one) pull,
thus I attach below two diffs:
A. Against previous pull, tags/samsung-dt64-6.8
B. Against master, v6.7-rc1
This includes topic branch, see explanation in pull-request/tag. Most of the
bindings patches affect DTS, because they include compatible-refactoring. This
refactoring affects new device support - ExynosAutov920 and Google GS101 -
thus everything comes together.
Best regards,
Krzysztof
The following changes since commit 40af852a7ca59d23ab4afd02af2623121da2f116:
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 (2023-12-11 08:41:24 +0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.8-2
for you to fetch changes up to d0da0de31e1d50ff905eb8f095628eea666f8c67:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT (2023-12-18 11:15:51 +0100)
----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
----------------------------------------------------------------
Aakarsh Jain (1):
arm64: dts: fsd: Add MFC related DT enteries
Lukas Bulwahn (1):
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
Peter Griffin (4):
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: exynos: google: Add initial Google gs101 SoC support
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
MAINTAINERS: add entry for Google Tensor SoC
Documentation/devicetree/bindings/arm/google.yaml | 53 +
MAINTAINERS | 10 +
arch/arm64/boot/dts/exynos/Makefile | 2 +
arch/arm64/boot/dts/exynos/google/Makefile | 4 +
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 105 ++
.../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1249 ++++++++++++++++++++
arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h | 33 +
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 473 ++++++++
arch/arm64/boot/dts/tesla/fsd.dtsi | 21 +
9 files changed, 1950 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/google.yaml
create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
----------------------------------------------------------------
----------------------------------------------------------------
DIFF against master/v6.7-rc1
----------------------------------------------------------------
The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:
Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.8-2
for you to fetch changes up to d0da0de31e1d50ff905eb8f095628eea666f8c67:
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT (2023-12-18 11:15:51 +0100)
----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.8, part two
1. Tesla FSD: Add Multi Format Codec (MFC) device nodes, for accelerated
video de/encoding.
2. Add initial Google Tensor GS101 SoC support. The GS101 SoC can be
found on Google Pixel 6 phones. Currently the DTS brings only basic
support: core clock controllers, pin controllers, serial, watchdog
and ARM core blocks.
----------------------------------------------------------------
Aakarsh Jain (1):
arm64: dts: fsd: Add MFC related DT enteries
Jaewon Kim (10):
arm64: dts: exynos: add gpio-key node for exynosautov9-sadk
dt-bindings: samsung: exynos-sysreg: add exynosautov920 sysreg
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
arm64: dts: exynos: add initial support for exynosautov920 SoC
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
Krzysztof Kozlowski (28):
dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
dt-bindings: serial: samsung: add specific compatibles for existing SoC
dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
dt-bindings: pwm: samsung: add specific compatibles for existing SoC
arm64: dts: exynos5433: add specific compatibles to several blocks
arm64: dts: exynos7: add specific compatibles to several blocks
arm64: dts: exynos7885: add specific compatibles to several blocks
arm64: dts: exynos850: add specific compatibles to several blocks
arm64: dts: exynosautov9: add specific compatibles to several blocks
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
Lukas Bulwahn (1):
MAINTAINERS: adjust file entry in GOOGLE TENSOR SoC SUPPORT
Peter Griffin (7):
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: arm: google: Add bindings for Google ARM platforms
arm64: dts: exynos: google: Add initial Google gs101 SoC support
arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
MAINTAINERS: add entry for Google Tensor SoC
Documentation/devicetree/bindings/arm/google.yaml | 53 +
.../bindings/arm/samsung/samsung-boards.yaml | 6 +
.../bindings/clock/google,gs101-clock.yaml | 106 ++
.../devicetree/bindings/gpu/arm,mali-midgard.yaml | 5 +
.../bindings/hwinfo/samsung,exynos-chipid.yaml | 18 +-
.../devicetree/bindings/i2c/i2c-exynos5.yaml | 11 +-
.../bindings/i2c/samsung,s3c2410-i2c.yaml | 22 +-
.../bindings/iio/adc/samsung,exynos-adc.yaml | 29 +-
.../bindings/mfd/samsung,exynos5433-lpass.yaml | 2 +-
.../bindings/mmc/samsung,exynos-dw-mshc.yaml | 25 +-
.../devicetree/bindings/pwm/pwm-samsung.yaml | 4 +
Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 5 +
.../devicetree/bindings/serial/samsung_uart.yaml | 17 +-
.../bindings/soc/samsung/exynos-pmu.yaml | 10 +
.../bindings/soc/samsung/exynos-usi.yaml | 6 +-
.../soc/samsung/samsung,exynos-sysreg.yaml | 5 +
.../devicetree/bindings/sound/samsung-i2s.yaml | 19 +-
.../devicetree/bindings/watchdog/samsung-wdt.yaml | 21 +-
MAINTAINERS | 10 +
arch/arm64/boot/dts/exynos/Makefile | 5 +-
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 60 +-
arch/arm64/boot/dts/exynos/exynos7.dtsi | 18 +-
arch/arm64/boot/dts/exynos/exynos7885.dtsi | 45 +-
arch/arm64/boot/dts/exynos/exynos850.dtsi | 40 +-
arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts | 51 +
arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 10 +-
.../boot/dts/exynos/exynosautov920-pinctrl.dtsi | 1266 ++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts | 88 ++
arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 312 +++++
arch/arm64/boot/dts/exynos/google/Makefile | 4 +
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 105 ++
.../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1249 +++++++++++++++++++
arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h | 33 +
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 473 ++++++++
arch/arm64/boot/dts/tesla/fsd.dtsi | 53 +-
include/dt-bindings/clock/google,gs101.h | 392 ++++++
36 files changed, 4444 insertions(+), 134 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/google.yaml
create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
create mode 100644 include/dt-bindings/clock/google,gs101.h
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-20 8:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-20 8:47 [GIT PULL 1/2] samsung: drivers for v6.8 Krzysztof Kozlowski
2023-12-20 8:47 ` Krzysztof Kozlowski
2023-12-20 8:47 ` Krzysztof Kozlowski [this message]
2023-12-20 8:47 ` [GIT PULL 2/2] arm64: dts: samsung: DTS for v6.8, part two Krzysztof Kozlowski
2023-12-21 17:41 ` [GIT PULL 1/2] samsung: drivers for v6.8 patchwork-bot+linux-soc
2023-12-22 12:01 ` patchwork-bot+linux-soc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231220084722.22149-2-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=peter.griffin@linaro.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.