From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Wesley Cheng <quic_wcheng@quicinc.com>, Bryan O'Donoghue <bryan.odonoghue@linaro.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@kernel.org>, Guenter Roeck <linux@roeck-us.net>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-phy@lists.infradead.org Subject: [PATCH v2 11/15] phy: qcom: qmp-usb: drop dual-lane handling Date: Sat, 13 Jan 2024 22:55:54 +0200 [thread overview] Message-ID: <20240113-pmi632-typec-v2-11-182d9aa0a5b3@linaro.org> (raw) In-Reply-To: <20240113-pmi632-typec-v2-0-182d9aa0a5b3@linaro.org> Now as all dual-lane PHYs have been migrated to a new driver, drop support for dual lanes configuration. If the PHY uses two lanes for USB, it is symthom that it should use either a combo USB+DP or a USB-C PHY driver. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 57 +-------------------------------- 1 file changed, 1 insertion(+), 56 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index c7698369d3dc..e62539ce99a6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1237,15 +1237,10 @@ struct qmp_usb_offsets { u16 pcs_usb; u16 tx; u16 rx; - /* for PHYs with >= 2 lanes */ - u16 tx2; - u16 rx2; }; /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { - int lanes; - const struct qmp_usb_offsets *offsets; /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ @@ -1285,8 +1280,6 @@ struct qmp_usb { void __iomem *pcs_usb; void __iomem *tx; void __iomem *rx; - void __iomem *tx2; - void __iomem *rx2; struct clk *pipe_clk; struct clk_bulk_data *clks; @@ -1393,8 +1386,6 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = { }; static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = ipq8074_usb3_serdes_tbl, @@ -1411,8 +1402,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { }; static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_ipq9574, .serdes_tbl = ipq9574_usb3_serdes_tbl, @@ -1429,8 +1418,6 @@ static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { }; static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = msm8996_usb3_serdes_tbl, @@ -1447,8 +1434,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { }; static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, @@ -1467,8 +1452,6 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, @@ -1487,8 +1470,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, @@ -1507,8 +1488,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1530,8 +1509,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1553,8 +1530,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1576,8 +1551,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1599,7 +1572,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = { - .lanes = 1, .offsets = &qmp_usb_offsets_v6, .serdes_tbl = sdx75_usb3_uniphy_serdes_tbl, @@ -1621,8 +1593,6 @@ static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1644,8 +1614,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg x1e80100_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v7, .serdes_tbl = x1e80100_usb3_uniphy_serdes_tbl, @@ -1780,11 +1748,6 @@ static int qmp_usb_power_on(struct phy *phy) qmp_usb_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1); qmp_usb_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1); - if (cfg->lanes >= 2) { - qmp_usb_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2); - qmp_usb_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2); - } - qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); if (pcs_usb) @@ -2131,7 +2094,6 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np) /* * Get memory resources for the PHY: * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. - * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5 * For single lane PHYs: pcs_misc (optional) -> 3. */ qmp->tx = devm_of_iomap(dev, np, 0, NULL); @@ -2149,19 +2111,7 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np) if (cfg->pcs_usb_offset) qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset; - if (cfg->lanes >= 2) { - qmp->tx2 = devm_of_iomap(dev, np, 3, NULL); - if (IS_ERR(qmp->tx2)) - return PTR_ERR(qmp->tx2); - - qmp->rx2 = devm_of_iomap(dev, np, 4, NULL); - if (IS_ERR(qmp->rx2)) - return PTR_ERR(qmp->rx2); - - qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL); - } else { - qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL); - } + qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL); if (IS_ERR(qmp->pcs_misc)) { dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); @@ -2213,11 +2163,6 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp) qmp->tx = base + offs->tx; qmp->rx = base + offs->rx; - if (cfg->lanes >= 2) { - qmp->tx2 = base + offs->tx2; - qmp->rx2 = base + offs->rx2; - } - ret = qmp_usb_clk_init(qmp); if (ret) return ret; -- 2.39.2 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Wesley Cheng <quic_wcheng@quicinc.com>, Bryan O'Donoghue <bryan.odonoghue@linaro.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@kernel.org>, Guenter Roeck <linux@roeck-us.net>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-phy@lists.infradead.org Subject: [PATCH v2 11/15] phy: qcom: qmp-usb: drop dual-lane handling Date: Sat, 13 Jan 2024 22:55:54 +0200 [thread overview] Message-ID: <20240113-pmi632-typec-v2-11-182d9aa0a5b3@linaro.org> (raw) In-Reply-To: <20240113-pmi632-typec-v2-0-182d9aa0a5b3@linaro.org> Now as all dual-lane PHYs have been migrated to a new driver, drop support for dual lanes configuration. If the PHY uses two lanes for USB, it is symthom that it should use either a combo USB+DP or a USB-C PHY driver. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 57 +-------------------------------- 1 file changed, 1 insertion(+), 56 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index c7698369d3dc..e62539ce99a6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1237,15 +1237,10 @@ struct qmp_usb_offsets { u16 pcs_usb; u16 tx; u16 rx; - /* for PHYs with >= 2 lanes */ - u16 tx2; - u16 rx2; }; /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { - int lanes; - const struct qmp_usb_offsets *offsets; /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ @@ -1285,8 +1280,6 @@ struct qmp_usb { void __iomem *pcs_usb; void __iomem *tx; void __iomem *rx; - void __iomem *tx2; - void __iomem *rx2; struct clk *pipe_clk; struct clk_bulk_data *clks; @@ -1393,8 +1386,6 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v7 = { }; static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = ipq8074_usb3_serdes_tbl, @@ -1411,8 +1402,6 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { }; static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_ipq9574, .serdes_tbl = ipq9574_usb3_serdes_tbl, @@ -1429,8 +1418,6 @@ static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { }; static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = msm8996_usb3_serdes_tbl, @@ -1447,8 +1434,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { }; static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, @@ -1467,8 +1452,6 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl, @@ -1487,8 +1470,6 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v3, .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, @@ -1507,8 +1488,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1530,8 +1509,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1553,8 +1530,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v4, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1576,8 +1551,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1599,7 +1572,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = { - .lanes = 1, .offsets = &qmp_usb_offsets_v6, .serdes_tbl = sdx75_usb3_uniphy_serdes_tbl, @@ -1621,8 +1593,6 @@ static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v5, .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, @@ -1644,8 +1614,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { }; static const struct qmp_phy_cfg x1e80100_usb3_uniphy_cfg = { - .lanes = 1, - .offsets = &qmp_usb_offsets_v7, .serdes_tbl = x1e80100_usb3_uniphy_serdes_tbl, @@ -1780,11 +1748,6 @@ static int qmp_usb_power_on(struct phy *phy) qmp_usb_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1); qmp_usb_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1); - if (cfg->lanes >= 2) { - qmp_usb_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2); - qmp_usb_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2); - } - qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); if (pcs_usb) @@ -2131,7 +2094,6 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np) /* * Get memory resources for the PHY: * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. - * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5 * For single lane PHYs: pcs_misc (optional) -> 3. */ qmp->tx = devm_of_iomap(dev, np, 0, NULL); @@ -2149,19 +2111,7 @@ static int qmp_usb_parse_dt_legacy(struct qmp_usb *qmp, struct device_node *np) if (cfg->pcs_usb_offset) qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset; - if (cfg->lanes >= 2) { - qmp->tx2 = devm_of_iomap(dev, np, 3, NULL); - if (IS_ERR(qmp->tx2)) - return PTR_ERR(qmp->tx2); - - qmp->rx2 = devm_of_iomap(dev, np, 4, NULL); - if (IS_ERR(qmp->rx2)) - return PTR_ERR(qmp->rx2); - - qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL); - } else { - qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL); - } + qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL); if (IS_ERR(qmp->pcs_misc)) { dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); @@ -2213,11 +2163,6 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp) qmp->tx = base + offs->tx; qmp->rx = base + offs->rx; - if (cfg->lanes >= 2) { - qmp->tx2 = base + offs->tx2; - qmp->rx2 = base + offs->rx2; - } - ret = qmp_usb_clk_init(qmp); if (ret) return ret; -- 2.39.2
next prev parent reply other threads:[~2024-01-13 20:56 UTC|newest] Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-01-13 20:55 [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-13 20:55 ` [PATCH v2 01/15] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632 Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 7:58 ` Krzysztof Kozlowski 2024-01-15 7:58 ` Krzysztof Kozlowski 2024-01-13 20:55 ` [PATCH v2 02/15] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 7:59 ` Krzysztof Kozlowski 2024-01-15 7:59 ` Krzysztof Kozlowski 2024-01-13 20:55 ` [PATCH v2 03/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: split from sc8280xp PHY schema Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 8:00 ` Krzysztof Kozlowski 2024-01-15 8:00 ` Krzysztof Kozlowski 2024-01-13 20:55 ` [PATCH v2 04/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 9:15 ` Krzysztof Kozlowski 2024-01-15 9:15 ` Krzysztof Kozlowski 2024-01-15 9:47 ` Dmitry Baryshkov 2024-01-15 9:47 ` Dmitry Baryshkov 2024-01-15 10:21 ` Krzysztof Kozlowski 2024-01-15 10:21 ` Krzysztof Kozlowski 2024-01-13 20:55 ` [PATCH v2 05/15] usb: typec: tcpm: fix the PD disabled case Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 9:00 ` Alexander Stein 2024-01-15 9:00 ` Alexander Stein 2024-01-18 9:53 ` Heikki Krogerus 2024-01-18 9:53 ` Heikki Krogerus 2024-01-13 20:55 ` [PATCH v2 06/15] usb: typec: qcom-pmic-typec: fix arguments of qcom_pmic_typec_pdphy_set_roles Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-14 15:51 ` Bryan O'Donoghue 2024-01-14 15:51 ` Bryan O'Donoghue 2024-01-14 16:13 ` Bryan O'Donoghue 2024-01-14 16:13 ` Bryan O'Donoghue 2024-01-13 20:55 ` [PATCH v2 07/15] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-13 20:55 ` [PATCH v2 08/15] usb: typec: qcom-pmic-typec: allow different implementations for the port backend Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-14 16:12 ` Bryan O'Donoghue 2024-01-14 16:12 ` Bryan O'Donoghue 2024-01-13 20:55 ` [PATCH v2 09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-16 12:32 ` Konrad Dybcio 2024-01-16 12:32 ` Konrad Dybcio 2024-01-16 12:56 ` Dmitry Baryshkov 2024-01-16 12:56 ` Dmitry Baryshkov 2024-01-16 14:23 ` Heikki Krogerus 2024-01-16 14:23 ` Heikki Krogerus 2024-01-25 0:07 ` Dmitry Baryshkov 2024-01-25 0:07 ` Dmitry Baryshkov 2024-01-25 11:03 ` Heikki Krogerus 2024-01-25 11:03 ` Heikki Krogerus 2024-01-13 20:55 ` [PATCH v2 10/15] phy: qcom: qmp-usb: split USB-C PHY driver Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-16 12:33 ` Konrad Dybcio 2024-01-16 12:33 ` Konrad Dybcio 2024-01-13 20:55 ` Dmitry Baryshkov [this message] 2024-01-13 20:55 ` [PATCH v2 11/15] phy: qcom: qmp-usb: drop dual-lane handling Dmitry Baryshkov 2024-01-17 0:07 ` Jeff Johnson 2024-01-17 0:07 ` Jeff Johnson 2024-01-13 20:55 ` [PATCH v2 12/15] phy: qcom: qmp-usbc: add support for the Type-C handling Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-13 20:55 ` [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-15 10:00 ` Konrad Dybcio 2024-01-15 10:00 ` Konrad Dybcio 2024-01-15 10:43 ` Dmitry Baryshkov 2024-01-15 10:43 ` Dmitry Baryshkov 2024-01-17 17:23 ` Bryan O'Donoghue 2024-01-17 17:23 ` Bryan O'Donoghue 2024-01-17 18:05 ` Dmitry Baryshkov 2024-01-17 18:05 ` Dmitry Baryshkov 2024-01-17 18:23 ` Bryan O'Donoghue 2024-01-17 18:23 ` Bryan O'Donoghue 2024-01-17 22:01 ` Bjorn Andersson 2024-01-17 22:01 ` Bjorn Andersson 2024-01-18 11:17 ` Konrad Dybcio 2024-01-18 11:17 ` Konrad Dybcio 2024-01-18 13:38 ` Dmitry Baryshkov 2024-01-18 13:38 ` Dmitry Baryshkov 2024-01-18 13:54 ` Konrad Dybcio 2024-01-18 13:54 ` Konrad Dybcio 2024-01-13 20:55 ` [PATCH v2 14/15] arm64: dts: qcom: sm6115: drop pipe clock selection Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-13 20:55 ` [PATCH v2 15/15] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling Dmitry Baryshkov 2024-01-13 20:55 ` Dmitry Baryshkov 2024-01-23 20:32 ` Luca Weiss 2024-01-23 20:32 ` Luca Weiss 2024-01-24 1:16 ` Dmitry Baryshkov 2024-01-24 1:16 ` Dmitry Baryshkov 2024-01-23 14:20 ` (subset) [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC Vinod Koul 2024-01-23 14:20 ` Vinod Koul 2024-01-23 20:43 ` Luca Weiss 2024-01-23 20:43 ` Luca Weiss 2024-01-24 1:43 ` Dmitry Baryshkov 2024-01-24 1:43 ` Dmitry Baryshkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240113-pmi632-typec-v2-11-182d9aa0a5b3@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=andersson@kernel.org \ --cc=broonie@kernel.org \ --cc=bryan.odonoghue@linaro.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=heikki.krogerus@linux.intel.com \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=linux-usb@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=p.zabel@pengutronix.de \ --cc=quic_wcheng@quicinc.com \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.