All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Vinod Koul <vkoul@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-sound@vger.kernel.org,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
Date: Tue, 23 Jan 2024 00:43:15 +0000	[thread overview]
Message-ID: <20240123004315.068adcba@minigeek.lan> (raw)
In-Reply-To: <20240122170518.3090814-8-wens@kernel.org>

On Tue, 23 Jan 2024 01:05:18 +0800
Chen-Yu Tsai <wens@kernel.org> wrote:

Hi,

> From: Chen-Yu Tsai <wens@csie.org>
> 
> The H616 SoC has an SPDIF transmitter hardware block, which has the same
> layout as the one in the H6, minus the receiver side.
> 
> Add a device node for it, and a default pinmux.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Compared the details against the manual, the clock driver, and the
binding, they match:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index a0268439f3be..fd4c080b8e62 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -253,6 +253,11 @@ spi1_cs0_pin: spi1-cs0-pin {
>  				function = "spi1";
>  			};
>  
> +			spdif_tx_pin: spdif-tx-pin {
> +				pins = "PH4";
> +				function = "spdif";
> +			};
> +
>  			uart0_ph_pins: uart0-ph-pins {
>  				pins = "PH0", "PH1";
>  				function = "uart0";
> @@ -550,6 +555,21 @@ mdio0: mdio {
>  			};
>  		};
>  
> +		spdif: spdif@5093000 {
> +			compatible = "allwinner,sun50i-h616-spdif";
> +			reg = <0x05093000 0x400>;
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> +			clock-names = "apb", "spdif";
> +			resets = <&ccu RST_BUS_SPDIF>;
> +			dmas = <&dma 2>;
> +			dma-names = "tx";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&spdif_tx_pin>;
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		usbotg: usb@5100000 {
>  			compatible = "allwinner,sun50i-h616-musb",
>  				     "allwinner,sun8i-h3-musb";


WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Vinod Koul <vkoul@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-sound@vger.kernel.org,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
Date: Tue, 23 Jan 2024 00:43:15 +0000	[thread overview]
Message-ID: <20240123004315.068adcba@minigeek.lan> (raw)
In-Reply-To: <20240122170518.3090814-8-wens@kernel.org>

On Tue, 23 Jan 2024 01:05:18 +0800
Chen-Yu Tsai <wens@kernel.org> wrote:

Hi,

> From: Chen-Yu Tsai <wens@csie.org>
> 
> The H616 SoC has an SPDIF transmitter hardware block, which has the same
> layout as the one in the H6, minus the receiver side.
> 
> Add a device node for it, and a default pinmux.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Compared the details against the manual, the clock driver, and the
binding, they match:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index a0268439f3be..fd4c080b8e62 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -253,6 +253,11 @@ spi1_cs0_pin: spi1-cs0-pin {
>  				function = "spi1";
>  			};
>  
> +			spdif_tx_pin: spdif-tx-pin {
> +				pins = "PH4";
> +				function = "spdif";
> +			};
> +
>  			uart0_ph_pins: uart0-ph-pins {
>  				pins = "PH0", "PH1";
>  				function = "uart0";
> @@ -550,6 +555,21 @@ mdio0: mdio {
>  			};
>  		};
>  
> +		spdif: spdif@5093000 {
> +			compatible = "allwinner,sun50i-h616-spdif";
> +			reg = <0x05093000 0x400>;
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> +			clock-names = "apb", "spdif";
> +			resets = <&ccu RST_BUS_SPDIF>;
> +			dmas = <&dma 2>;
> +			dma-names = "tx";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&spdif_tx_pin>;
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		usbotg: usb@5100000 {
>  			compatible = "allwinner,sun50i-h616-musb",
>  				     "allwinner,sun8i-h3-musb";


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-01-23  0:44 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-22 17:05 [PATCH 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers Chen-Yu Tsai
2024-01-22 17:05 ` Chen-Yu Tsai
2024-01-22 17:05 ` [PATCH 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6 Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-22 18:18   ` Conor Dooley
2024-01-22 18:18     ` Conor Dooley
2024-01-23 17:48   ` Jernej Škrabec
2024-01-23 17:48     ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-22 18:19   ` Conor Dooley
2024-01-22 18:19     ` Conor Dooley
2024-01-23 17:49   ` Jernej Škrabec
2024-01-23 17:49     ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-23  0:38   ` Andre Przywara
2024-01-23  0:38     ` Andre Przywara
2024-01-23 17:50   ` Jernej Škrabec
2024-01-23 17:50     ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616 Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-22 18:18   ` Conor Dooley
2024-01-22 18:18     ` Conor Dooley
2024-01-25 14:31     ` Chen-Yu Tsai
2024-01-25 14:31       ` Chen-Yu Tsai
2024-01-23  0:40   ` Andre Przywara
2024-01-23  0:40     ` Andre Przywara
2024-01-25 14:37     ` Chen-Yu Tsai
2024-01-25 14:37       ` Chen-Yu Tsai
2024-01-25 15:09       ` Andre Przywara
2024-01-25 15:09         ` Andre Przywara
2024-01-25 15:45         ` Chen-Yu Tsai
2024-01-25 15:45           ` Chen-Yu Tsai
2024-01-22 17:05 ` [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-23  0:39   ` Andre Przywara
2024-01-23  0:39     ` Andre Przywara
2024-01-23 17:52   ` Jernej Škrabec
2024-01-23 17:52     ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-23  0:41   ` Andre Przywara
2024-01-23  0:41     ` Andre Przywara
2024-01-22 17:05 ` [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node Chen-Yu Tsai
2024-01-22 17:05   ` Chen-Yu Tsai
2024-01-23  0:43   ` Andre Przywara [this message]
2024-01-23  0:43     ` Andre Przywara
2024-01-23 17:53   ` Jernej Škrabec
2024-01-23 17:53     ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240123004315.068adcba@minigeek.lan \
    --to=andre.przywara@arm.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=tiwai@suse.com \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.