All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Josua Mayer <josua@solid-run.com>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Pratyush Yadav <pratyush@kernel.org>,
	Michael Walle <mwalle@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Yazan Shhady <yazan.shhady@solid-run.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-iio@vger.kernel.org, Rob Herring <robh@kernel.org>,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
Date: Mon, 12 Feb 2024 21:06:36 +0100	[thread overview]
Message-ID: <2024021220055301ade3d4@mail.local> (raw)
In-Reply-To: <20240212-add-am64-som-v6-2-b59edb2bc8c3@solid-run.com>

On 12/02/2024 18:38:09+0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
> 
> In addition to the text description reference generic interrupts
> properties and add an example.
> 
> Signed-off-by: Josua Mayer <josua@solid-run.com>

Did something change since v6? If not, why didn't you collect the
reviewed-by tag?

> ---
>  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ---------
>  .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 79 ++++++++++++++++++++++
>  2 files changed, 79 insertions(+), 31 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> deleted file mode 100644
> index 2405e35a1bc0..000000000000
> --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -Abracon ABX80X I2C ultra low power RTC/Alarm chip
> -
> -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> -is the superset of ab180x.
> -
> -Required properties:
> -
> - - "compatible": should one of:
> -        "abracon,abx80x"
> -        "abracon,ab0801"
> -        "abracon,ab0803"
> -        "abracon,ab0804"
> -        "abracon,ab0805"
> -        "abracon,ab1801"
> -        "abracon,ab1803"
> -        "abracon,ab1804"
> -        "abracon,ab1805"
> -        "microcrystal,rv1805"
> -	Using "abracon,abx80x" will enable chip autodetection.
> - - "reg": I2C bus address of the device
> -
> -Optional properties:
> -
> -The abx804 and abx805 have a trickle charger that is able to charge the
> -connected battery or supercap. Both the following properties have to be defined
> -and valid to enable charging:
> -
> - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> -                          resistor, the other values are in kOhm.
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> new file mode 100644
> index 000000000000..58dbbca27deb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
> +
> +maintainers:
> +  - linux-rtc@vger.kernel.org
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    description:
> +      The wildcard 'abracon,abx80x' may be used to support a mix
> +      of different abracon rtc`s. In this case the driver
> +      must perform auto-detection from ID register.
> +    enum:
> +      - abracon,abx80x
> +      - abracon,ab0801
> +      - abracon,ab0803
> +      - abracon,ab0804
> +      - abracon,ab0805
> +      - abracon,ab1801
> +      - abracon,ab1803
> +      - abracon,ab1804
> +      - abracon,ab1805
> +      - microcrystal,rv1805
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  abracon,tc-diode:
> +    description:
> +      Trickle-charge diode type.
> +      Required to enable charging backup battery.
> +
> +      Supported are 'standard' diodes with a 0.6V drop
> +      and 'schottky' diodes with a 0.3V drop.
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum:
> +      - standard
> +      - schottky
> +
> +  abracon,tc-resistor:
> +    description:
> +      Trickle-charge resistor value in kOhm.
> +      Required to enable charging backup battery.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 3, 6, 11]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@69 {
> +            compatible = "abracon,abx80x";
> +            reg = <0x69>;
> +            abracon,tc-diode = "schottky";
> +            abracon,tc-resistor = <3>;
> +            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
> +        };
> +    };
> 
> -- 
> 2.35.3
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Josua Mayer <josua@solid-run.com>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Pratyush Yadav <pratyush@kernel.org>,
	Michael Walle <mwalle@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Yazan Shhady <yazan.shhady@solid-run.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-iio@vger.kernel.org, Rob Herring <robh@kernel.org>,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
Date: Mon, 12 Feb 2024 21:06:36 +0100	[thread overview]
Message-ID: <2024021220055301ade3d4@mail.local> (raw)
In-Reply-To: <20240212-add-am64-som-v6-2-b59edb2bc8c3@solid-run.com>

On 12/02/2024 18:38:09+0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
> 
> In addition to the text description reference generic interrupts
> properties and add an example.
> 
> Signed-off-by: Josua Mayer <josua@solid-run.com>

Did something change since v6? If not, why didn't you collect the
reviewed-by tag?

> ---
>  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ---------
>  .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 79 ++++++++++++++++++++++
>  2 files changed, 79 insertions(+), 31 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> deleted file mode 100644
> index 2405e35a1bc0..000000000000
> --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -Abracon ABX80X I2C ultra low power RTC/Alarm chip
> -
> -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> -is the superset of ab180x.
> -
> -Required properties:
> -
> - - "compatible": should one of:
> -        "abracon,abx80x"
> -        "abracon,ab0801"
> -        "abracon,ab0803"
> -        "abracon,ab0804"
> -        "abracon,ab0805"
> -        "abracon,ab1801"
> -        "abracon,ab1803"
> -        "abracon,ab1804"
> -        "abracon,ab1805"
> -        "microcrystal,rv1805"
> -	Using "abracon,abx80x" will enable chip autodetection.
> - - "reg": I2C bus address of the device
> -
> -Optional properties:
> -
> -The abx804 and abx805 have a trickle charger that is able to charge the
> -connected battery or supercap. Both the following properties have to be defined
> -and valid to enable charging:
> -
> - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> -                          resistor, the other values are in kOhm.
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> new file mode 100644
> index 000000000000..58dbbca27deb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
> +
> +maintainers:
> +  - linux-rtc@vger.kernel.org
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    description:
> +      The wildcard 'abracon,abx80x' may be used to support a mix
> +      of different abracon rtc`s. In this case the driver
> +      must perform auto-detection from ID register.
> +    enum:
> +      - abracon,abx80x
> +      - abracon,ab0801
> +      - abracon,ab0803
> +      - abracon,ab0804
> +      - abracon,ab0805
> +      - abracon,ab1801
> +      - abracon,ab1803
> +      - abracon,ab1804
> +      - abracon,ab1805
> +      - microcrystal,rv1805
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  abracon,tc-diode:
> +    description:
> +      Trickle-charge diode type.
> +      Required to enable charging backup battery.
> +
> +      Supported are 'standard' diodes with a 0.6V drop
> +      and 'schottky' diodes with a 0.3V drop.
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum:
> +      - standard
> +      - schottky
> +
> +  abracon,tc-resistor:
> +    description:
> +      Trickle-charge resistor value in kOhm.
> +      Required to enable charging backup battery.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 3, 6, 11]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@69 {
> +            compatible = "abracon,abx80x";
> +            reg = <0x69>;
> +            abracon,tc-diode = "schottky";
> +            abracon,tc-resistor = <3>;
> +            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
> +        };
> +    };
> 
> -- 
> 2.35.3
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Josua Mayer <josua@solid-run.com>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Pratyush Yadav <pratyush@kernel.org>,
	Michael Walle <mwalle@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Yazan Shhady <yazan.shhady@solid-run.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-iio@vger.kernel.org, Rob Herring <robh@kernel.org>,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
Date: Mon, 12 Feb 2024 21:06:36 +0100	[thread overview]
Message-ID: <2024021220055301ade3d4@mail.local> (raw)
In-Reply-To: <20240212-add-am64-som-v6-2-b59edb2bc8c3@solid-run.com>

On 12/02/2024 18:38:09+0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
> 
> In addition to the text description reference generic interrupts
> properties and add an example.
> 
> Signed-off-by: Josua Mayer <josua@solid-run.com>

Did something change since v6? If not, why didn't you collect the
reviewed-by tag?

> ---
>  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ---------
>  .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 79 ++++++++++++++++++++++
>  2 files changed, 79 insertions(+), 31 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> deleted file mode 100644
> index 2405e35a1bc0..000000000000
> --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -Abracon ABX80X I2C ultra low power RTC/Alarm chip
> -
> -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> -is the superset of ab180x.
> -
> -Required properties:
> -
> - - "compatible": should one of:
> -        "abracon,abx80x"
> -        "abracon,ab0801"
> -        "abracon,ab0803"
> -        "abracon,ab0804"
> -        "abracon,ab0805"
> -        "abracon,ab1801"
> -        "abracon,ab1803"
> -        "abracon,ab1804"
> -        "abracon,ab1805"
> -        "microcrystal,rv1805"
> -	Using "abracon,abx80x" will enable chip autodetection.
> - - "reg": I2C bus address of the device
> -
> -Optional properties:
> -
> -The abx804 and abx805 have a trickle charger that is able to charge the
> -connected battery or supercap. Both the following properties have to be defined
> -and valid to enable charging:
> -
> - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> -                          resistor, the other values are in kOhm.
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> new file mode 100644
> index 000000000000..58dbbca27deb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
> +
> +maintainers:
> +  - linux-rtc@vger.kernel.org
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    description:
> +      The wildcard 'abracon,abx80x' may be used to support a mix
> +      of different abracon rtc`s. In this case the driver
> +      must perform auto-detection from ID register.
> +    enum:
> +      - abracon,abx80x
> +      - abracon,ab0801
> +      - abracon,ab0803
> +      - abracon,ab0804
> +      - abracon,ab0805
> +      - abracon,ab1801
> +      - abracon,ab1803
> +      - abracon,ab1804
> +      - abracon,ab1805
> +      - microcrystal,rv1805
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  abracon,tc-diode:
> +    description:
> +      Trickle-charge diode type.
> +      Required to enable charging backup battery.
> +
> +      Supported are 'standard' diodes with a 0.6V drop
> +      and 'schottky' diodes with a 0.3V drop.
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum:
> +      - standard
> +      - schottky
> +
> +  abracon,tc-resistor:
> +    description:
> +      Trickle-charge resistor value in kOhm.
> +      Required to enable charging backup battery.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 3, 6, 11]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc@69 {
> +            compatible = "abracon,abx80x";
> +            reg = <0x69>;
> +            abracon,tc-diode = "schottky";
> +            abracon,tc-resistor = <3>;
> +            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
> +        };
> +    };
> 
> -- 
> 2.35.3
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-02-12 20:06 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-12 17:38 [PATCH v6 0/7] arm64: dts: add description for solidrun am642 som and hummingboard evb Josua Mayer
2024-02-12 17:38 ` Josua Mayer
2024-02-12 17:38 ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 1/7] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 20:06   ` Alexandre Belloni [this message]
2024-02-12 20:06     ` Alexandre Belloni
2024-02-12 20:06     ` Alexandre Belloni
2024-02-15 14:04     ` Josua Mayer
2024-02-15 14:04       ` Josua Mayer
2024-02-15 14:04       ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 3/7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-15 14:32   ` Rob Herring
2024-02-15 14:32     ` Rob Herring
2024-02-15 14:32     ` Rob Herring
2024-02-12 17:38 ` [PATCH v6 4/7] dt-bindings: mtd: spi-nor: " Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-15 14:32   ` Rob Herring
2024-02-15 14:32     ` Rob Herring
2024-02-15 14:32     ` Rob Herring
2024-02-12 17:38 ` [PATCH v6 5/7] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 6/7] arm64: dts: add description for solidrun am642 som and evaluation board Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 7/7] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 Josua Mayer
2024-02-12 17:38   ` Josua Mayer
2024-02-12 17:38   ` Josua Mayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2024021220055301ade3d4@mail.local \
    --to=alexandre.belloni@bootlin.com \
    --cc=a.zummo@towertech.it \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=josua@solid-run.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=mwalle@kernel.org \
    --cc=nm@ti.com \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tudor.ambarus@linaro.org \
    --cc=vigneshr@ti.com \
    --cc=yazan.shhady@solid-run.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.