From: Jerome Brunet <jbrunet@baylibre.com> To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Neil Armstrong" <neil.armstrong@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Conor Dooley" <conor+dt@kernel.org> Cc: Jerome Brunet <jbrunet@baylibre.com>, Kevin Hilman <khilman@baylibre.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org, JunYi Zhao <junyi.zhao@amlogic.com> Subject: [PATCH v5 0/5] pwm: meson: dt-bindings fixup Date: Wed, 21 Feb 2024 16:11:46 +0100 [thread overview] Message-ID: <20240221151154.26452-1-jbrunet@baylibre.com> (raw) This patchset aims to: * Fix the incorrect bindings for the s4 type of pwm that was introduced while converting the documentation from txt to yaml format. * Introduce a new compatible for the existing PWMs to better describe the HW in DT, instead of describing driver settings. * Make the introduction of a new pwm variant (s4) slightly easier. Changes since v4 [4]: * Rebased on Uwe's pwm rework in pwm-next * Drop change to carry device data in drvdata * Make the length of parent name array fixed * Single allocation instead 3 for the internal clock elements * meson8-pwm-v2 and meson-pwm-s4 compatibles under an enum instead of 2 const Changes since v3 [3]: * Split first rework patch into 3 changes * Use dev_warn_once() to notify use of obsolete bindings * Rebased on Uwe dev_err_probe() change. Changes since v2 [2]: * Drop DTS changes. These will be re-submitted later on. Possibly after u-boot gets support for the new compatible to minimise conversion problems. * Position deprecated property correctly in dt-bindings for the old meson8 type pwm bindings * Reword commit description of patch #2 to make more obvious it does not introduce a new HW support but fixes a bad bindings. * Dropped Rob's Reviewed-by on patch #2. It seemed appropriate considering the discussion on this change. Changes since v1 [1]: * Fix typo in the new binding compatible documentation * Disallow clock-names for the new compatibles in the schema documenation [1]: https://lore.kernel.org/linux-amlogic/20231106103259.703417-1-jbrunet@baylibre.com [2]: https://lore.kernel.org/linux-amlogic/20231117125919.1696980-1-jbrunet@baylibre.com [3]: https://lore.kernel.org/linux-amlogic/20231129134004.3642121-1-jbrunet@baylibre.com [4]: https://lore.kernel.org/linux-amlogic/20231222111658.832167-1-jbrunet@baylibre.com Jerome Brunet (5): dt-bindings: pwm: amlogic: fix s4 bindings dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types pwm: meson: generalize 4 inputs clock on meson8 pwm type pwm: meson: don't carry internal clock elements around pwm: meson: add generic compatible for meson8 to sm1 .../devicetree/bindings/pwm/pwm-amlogic.yaml | 115 ++++++- drivers/pwm/pwm-meson.c | 289 ++++++++++-------- 2 files changed, 260 insertions(+), 144 deletions(-) -- 2.43.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Neil Armstrong" <neil.armstrong@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Conor Dooley" <conor+dt@kernel.org> Cc: Jerome Brunet <jbrunet@baylibre.com>, Kevin Hilman <khilman@baylibre.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org, JunYi Zhao <junyi.zhao@amlogic.com> Subject: [PATCH v5 0/5] pwm: meson: dt-bindings fixup Date: Wed, 21 Feb 2024 16:11:46 +0100 [thread overview] Message-ID: <20240221151154.26452-1-jbrunet@baylibre.com> (raw) This patchset aims to: * Fix the incorrect bindings for the s4 type of pwm that was introduced while converting the documentation from txt to yaml format. * Introduce a new compatible for the existing PWMs to better describe the HW in DT, instead of describing driver settings. * Make the introduction of a new pwm variant (s4) slightly easier. Changes since v4 [4]: * Rebased on Uwe's pwm rework in pwm-next * Drop change to carry device data in drvdata * Make the length of parent name array fixed * Single allocation instead 3 for the internal clock elements * meson8-pwm-v2 and meson-pwm-s4 compatibles under an enum instead of 2 const Changes since v3 [3]: * Split first rework patch into 3 changes * Use dev_warn_once() to notify use of obsolete bindings * Rebased on Uwe dev_err_probe() change. Changes since v2 [2]: * Drop DTS changes. These will be re-submitted later on. Possibly after u-boot gets support for the new compatible to minimise conversion problems. * Position deprecated property correctly in dt-bindings for the old meson8 type pwm bindings * Reword commit description of patch #2 to make more obvious it does not introduce a new HW support but fixes a bad bindings. * Dropped Rob's Reviewed-by on patch #2. It seemed appropriate considering the discussion on this change. Changes since v1 [1]: * Fix typo in the new binding compatible documentation * Disallow clock-names for the new compatibles in the schema documenation [1]: https://lore.kernel.org/linux-amlogic/20231106103259.703417-1-jbrunet@baylibre.com [2]: https://lore.kernel.org/linux-amlogic/20231117125919.1696980-1-jbrunet@baylibre.com [3]: https://lore.kernel.org/linux-amlogic/20231129134004.3642121-1-jbrunet@baylibre.com [4]: https://lore.kernel.org/linux-amlogic/20231222111658.832167-1-jbrunet@baylibre.com Jerome Brunet (5): dt-bindings: pwm: amlogic: fix s4 bindings dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types pwm: meson: generalize 4 inputs clock on meson8 pwm type pwm: meson: don't carry internal clock elements around pwm: meson: add generic compatible for meson8 to sm1 .../devicetree/bindings/pwm/pwm-amlogic.yaml | 115 ++++++- drivers/pwm/pwm-meson.c | 289 ++++++++++-------- 2 files changed, 260 insertions(+), 144 deletions(-) -- 2.43.0
next reply other threads:[~2024-02-21 15:12 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-21 15:11 Jerome Brunet [this message] 2024-02-21 15:11 ` [PATCH v5 0/5] pwm: meson: dt-bindings fixup Jerome Brunet 2024-02-21 15:11 ` [PATCH v5 1/5] dt-bindings: pwm: amlogic: fix s4 bindings Jerome Brunet 2024-02-21 15:11 ` Jerome Brunet 2024-02-21 15:11 ` [PATCH v5 2/5] dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types Jerome Brunet 2024-02-21 15:11 ` Jerome Brunet 2024-02-23 14:19 ` Rob Herring 2024-02-23 14:19 ` Rob Herring 2024-02-21 15:11 ` [PATCH v5 3/5] pwm: meson: generalize 4 inputs clock on meson8 pwm type Jerome Brunet 2024-02-21 15:11 ` Jerome Brunet 2024-02-21 15:11 ` [PATCH v5 4/5] pwm: meson: don't carry internal clock elements around Jerome Brunet 2024-02-21 15:11 ` Jerome Brunet 2024-04-12 11:27 ` Uwe Kleine-König 2024-04-12 11:27 ` Uwe Kleine-König 2024-02-21 15:11 ` [PATCH v5 5/5] pwm: meson: add generic compatible for meson8 to sm1 Jerome Brunet 2024-02-21 15:11 ` Jerome Brunet 2024-04-12 12:08 ` Uwe Kleine-König 2024-04-12 12:08 ` Uwe Kleine-König 2024-04-18 11:57 ` Jerome Brunet 2024-04-18 11:57 ` Jerome Brunet 2024-04-18 16:08 ` Uwe Kleine-König 2024-04-18 16:08 ` Uwe Kleine-König 2024-04-23 8:08 ` Neil Armstrong 2024-04-23 8:08 ` Neil Armstrong 2024-03-02 10:04 ` [PATCH v5 0/5] pwm: meson: dt-bindings fixup Uwe Kleine-König 2024-03-02 10:04 ` Uwe Kleine-König 2024-03-02 15:50 ` Jerome Brunet 2024-03-02 15:50 ` Jerome Brunet 2024-04-12 8:04 ` Jerome Brunet 2024-04-12 8:04 ` Jerome Brunet 2024-04-12 8:29 ` George Stark 2024-04-12 8:29 ` George Stark
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240221151154.26452-1-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=junyi.zhao@amlogic.com \ --cc=khilman@baylibre.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=neil.armstrong@linaro.org \ --cc=robh+dt@kernel.org \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.