From: Joy Zou <joy.zou@nxp.com> To: ping.bai@nxp.com, lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev Subject: [PATCH v2 2/3] regulator: pca9450: add pca9451a support Date: Mon, 11 Mar 2024 16:47:56 +0800 [thread overview] Message-ID: <20240311084758.377889-3-joy.zou@nxp.com> (raw) In-Reply-To: <20240311084758.377889-1-joy.zou@nxp.com> Adding support for pmic pca9451a. This patch support old and new pmic pca9451a. The new pmic trimed BUCK1. The default value of Toff_Deb is used to distinguish the old and new pmic. Signed-off-by: Joy Zou <joy.zou@nxp.com> --- Changes in v2: 1. remove the old part support because the old part only is used for sample and is diffcult to distinguish old and new part. so drop old part. 2. remove the unnecessary marco definition in the file pca9450.h. --- drivers/regulator/pca9450-regulator.c | 197 +++++++++++++++++++++++++- include/linux/regulator/pca9450.h | 1 + 2 files changed, 195 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 2ab365d2749f..50c324e275b5 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -103,7 +103,15 @@ static const struct regulator_ops pca9450_ldo_regulator_ops = { * 0.60 to 2.1875V (12.5mV step) */ static const struct linear_range pca9450_dvs_buck_volts[] = { - REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), +}; + +/* + * BUCK1/3 + * 0.65 to 2.2375V (12.5mV step) + */ +static const struct linear_range pca9451a_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500), }; /* @@ -662,6 +670,178 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = { }, }; +static const struct pca9450_regulator_desc pca9451a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9451a_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .ramp_mask = BUCK1_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK2_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ_STBYREQ, + .ramp_mask = BUCK2_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + static irqreturn_t pca9450_irq_handler(int irq, void *data) { struct pca9450 *pca9450 = data; @@ -729,6 +909,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) regulator_desc = pca9450bc_regulators; pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); break; + case PCA9450_TYPE_PCA9451A: + regulator_desc = pca9451a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators); + break; default: dev_err(&i2c->dev, "Unknown device type"); return -EINVAL; @@ -755,7 +939,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) /* Check your board and dts for match the right pmic */ if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || - ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) || + ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) { dev_err(&i2c->dev, "Device id(%x) mismatched\n", device_id >> 4); return -EINVAL; @@ -767,6 +952,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) const struct pca9450_regulator_desc *r; r = ®ulator_desc[i]; + desc = &r->desc; config.regmap = pca9450->regmap; @@ -846,7 +1032,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) } dev_info(&i2c->dev, "%s probed.\n", - type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : + (type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc")); return 0; } @@ -864,6 +1051,10 @@ static const struct of_device_id pca9450_of_match[] = { .compatible = "nxp,pca9450c", .data = (void *)PCA9450_TYPE_PCA9450BC, }, + { + .compatible = "nxp,pca9451a", + .data = (void *)PCA9450_TYPE_PCA9451A, + }, { } }; MODULE_DEVICE_TABLE(of, pca9450_of_match); diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h index 505c908dbb81..243633c8dceb 100644 --- a/include/linux/regulator/pca9450.h +++ b/include/linux/regulator/pca9450.h @@ -9,6 +9,7 @@ enum pca9450_chip_type { PCA9450_TYPE_PCA9450A = 0, PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_PCA9451A, PCA9450_TYPE_AMOUNT, }; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Joy Zou <joy.zou@nxp.com> To: ping.bai@nxp.com, lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev Subject: [PATCH v2 2/3] regulator: pca9450: add pca9451a support Date: Mon, 11 Mar 2024 16:47:56 +0800 [thread overview] Message-ID: <20240311084758.377889-3-joy.zou@nxp.com> (raw) In-Reply-To: <20240311084758.377889-1-joy.zou@nxp.com> Adding support for pmic pca9451a. This patch support old and new pmic pca9451a. The new pmic trimed BUCK1. The default value of Toff_Deb is used to distinguish the old and new pmic. Signed-off-by: Joy Zou <joy.zou@nxp.com> --- Changes in v2: 1. remove the old part support because the old part only is used for sample and is diffcult to distinguish old and new part. so drop old part. 2. remove the unnecessary marco definition in the file pca9450.h. --- drivers/regulator/pca9450-regulator.c | 197 +++++++++++++++++++++++++- include/linux/regulator/pca9450.h | 1 + 2 files changed, 195 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 2ab365d2749f..50c324e275b5 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -103,7 +103,15 @@ static const struct regulator_ops pca9450_ldo_regulator_ops = { * 0.60 to 2.1875V (12.5mV step) */ static const struct linear_range pca9450_dvs_buck_volts[] = { - REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), +}; + +/* + * BUCK1/3 + * 0.65 to 2.2375V (12.5mV step) + */ +static const struct linear_range pca9451a_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500), }; /* @@ -662,6 +670,178 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = { }, }; +static const struct pca9450_regulator_desc pca9451a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9451a_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .ramp_mask = BUCK1_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK2_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ_STBYREQ, + .ramp_mask = BUCK2_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + static irqreturn_t pca9450_irq_handler(int irq, void *data) { struct pca9450 *pca9450 = data; @@ -729,6 +909,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) regulator_desc = pca9450bc_regulators; pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); break; + case PCA9450_TYPE_PCA9451A: + regulator_desc = pca9451a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators); + break; default: dev_err(&i2c->dev, "Unknown device type"); return -EINVAL; @@ -755,7 +939,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) /* Check your board and dts for match the right pmic */ if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || - ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) || + ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) { dev_err(&i2c->dev, "Device id(%x) mismatched\n", device_id >> 4); return -EINVAL; @@ -767,6 +952,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) const struct pca9450_regulator_desc *r; r = ®ulator_desc[i]; + desc = &r->desc; config.regmap = pca9450->regmap; @@ -846,7 +1032,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) } dev_info(&i2c->dev, "%s probed.\n", - type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : + (type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc")); return 0; } @@ -864,6 +1051,10 @@ static const struct of_device_id pca9450_of_match[] = { .compatible = "nxp,pca9450c", .data = (void *)PCA9450_TYPE_PCA9450BC, }, + { + .compatible = "nxp,pca9451a", + .data = (void *)PCA9450_TYPE_PCA9451A, + }, { } }; MODULE_DEVICE_TABLE(of, pca9450_of_match); diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h index 505c908dbb81..243633c8dceb 100644 --- a/include/linux/regulator/pca9450.h +++ b/include/linux/regulator/pca9450.h @@ -9,6 +9,7 @@ enum pca9450_chip_type { PCA9450_TYPE_PCA9450A = 0, PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_PCA9451A, PCA9450_TYPE_AMOUNT, }; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-11 8:40 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-11 8:47 [PATCH v2 0/3] add pmic pca9451a support Joy Zou 2024-03-11 8:47 ` Joy Zou 2024-03-11 8:47 ` [PATCH v2 1/3] regulator: dt-bindings: pca9450: add " Joy Zou 2024-03-11 8:47 ` Joy Zou 2024-03-11 10:00 ` Krzysztof Kozlowski 2024-03-11 10:00 ` Krzysztof Kozlowski 2024-03-11 10:04 ` [EXT] " Joy Zou 2024-03-11 10:04 ` Joy Zou 2024-03-11 8:47 ` Joy Zou [this message] 2024-03-11 8:47 ` [PATCH v2 2/3] regulator: " Joy Zou 2024-03-11 9:09 ` Alexander Stein 2024-03-11 9:09 ` Alexander Stein 2024-03-11 9:13 ` [EXT] " Joy Zou 2024-03-11 9:13 ` Joy Zou 2024-03-11 13:28 ` Mark Brown 2024-03-11 13:28 ` Mark Brown 2024-03-12 2:08 ` [EXT] " Joy Zou 2024-03-12 2:08 ` Joy Zou 2024-03-11 8:47 ` [PATCH v2 3/3] arm64: dts: imx93-11x11-evk: " Joy Zou 2024-03-11 8:47 ` Joy Zou 2024-03-11 8:51 ` Marco Felsch 2024-03-11 8:51 ` Marco Felsch 2024-03-11 8:57 ` [EXT] " Joy Zou 2024-03-11 8:57 ` Joy Zou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240311084758.377889-3-joy.zou@nxp.com \ --to=joy.zou@nxp.com \ --cc=broonie@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=ping.bai@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.