From: Zhangjin Wu <falcon@tinylab.org> To: w@1wt.eu Cc: arnd@arndb.de, falcon@tinylab.org, linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org, linux-riscv@lists.infradead.org, thomas@t-8ch.de, conor@kernel.org Subject: [PATCH v2 2/7] selftests/nolibc: allow specify extra arguments for qemu Date: Mon, 29 May 2023 20:56:08 +0800 [thread overview] Message-ID: <209c75f2c15992e95bca4f6c2f96ef7f23ab3fcc.1685362482.git.falcon@tinylab.org> (raw) In-Reply-To: <cover.1685362482.git.falcon@tinylab.org> The opensbi package from Ubuntu 20.04 only provides rv64 firmwares: $ dpkg -S opensbi | grep -E "fw_.*bin|fw_.*elf" | uniq opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.bin opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.bin opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.elf opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf To run this nolibc test for rv32, users must build opensbi or download a prebuilt one from qemu repository: https://gitlab.com/qemu-project/qemu/-/blob/master/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin And then use -bios to tell qemu use it to avoid such failure: $ qemu-system-riscv32 -display none -no-reboot -kernel /path/to/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1" qemu-system-riscv32: Unable to load the RISC-V firmware "opensbi-riscv32-generic-fw_dynamic.bin" To run from makefile, QEMU_ARGS_EXTRA is added to allow pass extra arguments like -bios: $ make run QEMU_ARGS_EXTRA="-bios /path/to/opensbi-riscv32-generic-fw_dynamic.bin" ... Signed-off-by: Zhangjin Wu <falcon@tinylab.org> --- tools/testing/selftests/nolibc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 47c3c89092e4..44088535682e 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -64,7 +64,7 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) +QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_EXTRA) # OUTPUT is only set when run from the main makefile, otherwise # it defaults to this nolibc directory. -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Zhangjin Wu <falcon@tinylab.org> To: w@1wt.eu Cc: arnd@arndb.de, falcon@tinylab.org, linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org, linux-riscv@lists.infradead.org, thomas@t-8ch.de, conor@kernel.org Subject: [PATCH v2 2/7] selftests/nolibc: allow specify extra arguments for qemu Date: Mon, 29 May 2023 20:56:08 +0800 [thread overview] Message-ID: <209c75f2c15992e95bca4f6c2f96ef7f23ab3fcc.1685362482.git.falcon@tinylab.org> (raw) In-Reply-To: <cover.1685362482.git.falcon@tinylab.org> The opensbi package from Ubuntu 20.04 only provides rv64 firmwares: $ dpkg -S opensbi | grep -E "fw_.*bin|fw_.*elf" | uniq opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.bin opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.bin opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.elf opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf To run this nolibc test for rv32, users must build opensbi or download a prebuilt one from qemu repository: https://gitlab.com/qemu-project/qemu/-/blob/master/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin And then use -bios to tell qemu use it to avoid such failure: $ qemu-system-riscv32 -display none -no-reboot -kernel /path/to/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1" qemu-system-riscv32: Unable to load the RISC-V firmware "opensbi-riscv32-generic-fw_dynamic.bin" To run from makefile, QEMU_ARGS_EXTRA is added to allow pass extra arguments like -bios: $ make run QEMU_ARGS_EXTRA="-bios /path/to/opensbi-riscv32-generic-fw_dynamic.bin" ... Signed-off-by: Zhangjin Wu <falcon@tinylab.org> --- tools/testing/selftests/nolibc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 47c3c89092e4..44088535682e 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -64,7 +64,7 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) +QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_EXTRA) # OUTPUT is only set when run from the main makefile, otherwise # it defaults to this nolibc directory. -- 2.25.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-05-29 12:56 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-29 12:52 [PATCH v2 0/7] nolibc: add generic part1 of prepare for rv32 Zhangjin Wu 2023-05-29 12:52 ` Zhangjin Wu 2023-05-29 12:54 ` [PATCH v2 1/7] selftests/nolibc: syscall_args: use generic __NR_statx Zhangjin Wu 2023-05-29 12:54 ` Zhangjin Wu 2023-05-29 12:56 ` Zhangjin Wu [this message] 2023-05-29 12:56 ` [PATCH v2 2/7] selftests/nolibc: allow specify extra arguments for qemu Zhangjin Wu 2023-05-29 13:00 ` [PATCH v2 3/7] selftests/nolibc: fix up compile warning with glibc on x86_64 Zhangjin Wu 2023-05-29 13:00 ` Zhangjin Wu 2023-05-29 13:04 ` Willy Tarreau 2023-05-29 13:04 ` Willy Tarreau 2023-05-29 13:15 ` Zhangjin Wu 2023-05-29 13:15 ` Zhangjin Wu 2023-05-29 13:02 ` [PATCH v2 4/7] selftests/nolibc: not include limits.h for nolibc Zhangjin Wu 2023-05-29 13:02 ` Zhangjin Wu 2023-05-29 13:04 ` [PATCH v2 5/7] selftests/nolibc: use INT_MAX instead of __INT_MAX__ Zhangjin Wu 2023-05-29 13:04 ` Zhangjin Wu 2023-05-29 13:07 ` [PATCH v2 6/7] tools/nolibc: arm: add missing my_syscall6 Zhangjin Wu 2023-05-29 13:07 ` Zhangjin Wu 2023-05-29 13:09 ` [PATCH v2 7/7] tools/nolibc: open: fix up compile warning for arm Zhangjin Wu 2023-05-29 13:09 ` Zhangjin Wu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=209c75f2c15992e95bca4f6c2f96ef7f23ab3fcc.1685362482.git.falcon@tinylab.org \ --to=falcon@tinylab.org \ --cc=arnd@arndb.de \ --cc=conor@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-kselftest@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=thomas@t-8ch.de \ --cc=w@1wt.eu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.