From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Valentin Caron <valentin.caron@foss.st.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com>, linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 1/2] spi: stm32: disable device mode with st,stm32f4-spi compatible Date: Wed, 21 Jun 2023 14:25:57 +0200 [thread overview] Message-ID: <29666c1f-c670-b38c-8555-e606771b480b@linaro.org> (raw) In-Reply-To: <20230621115523.923176-2-valentin.caron@foss.st.com> On 21/06/2023 13:55, Valentin Caron wrote: > STM32 SPI driver is not capable to handle device mode with stm32f4/f7 soc. > Stop probing if this case happens. > > Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> ... > > static const struct of_device_id stm32_spi_of_match[] = { > @@ -1798,8 +1802,15 @@ static int stm32_spi_probe(struct platform_device *pdev) > struct device_node *np = pdev->dev.of_node; > bool device_mode; > int ret; > + const struct of_device_id *of_match = > + of_match_device(pdev->dev.driver->of_match_table, &pdev->dev); > + const struct stm32_spi_cfg *cfg = (const struct stm32_spi_cfg *)of_match->data; It seems you open-coded of_device_get_match_data(). Best regards, Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Valentin Caron <valentin.caron@foss.st.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com>, linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 1/2] spi: stm32: disable device mode with st,stm32f4-spi compatible Date: Wed, 21 Jun 2023 14:25:57 +0200 [thread overview] Message-ID: <29666c1f-c670-b38c-8555-e606771b480b@linaro.org> (raw) In-Reply-To: <20230621115523.923176-2-valentin.caron@foss.st.com> On 21/06/2023 13:55, Valentin Caron wrote: > STM32 SPI driver is not capable to handle device mode with stm32f4/f7 soc. > Stop probing if this case happens. > > Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> ... > > static const struct of_device_id stm32_spi_of_match[] = { > @@ -1798,8 +1802,15 @@ static int stm32_spi_probe(struct platform_device *pdev) > struct device_node *np = pdev->dev.of_node; > bool device_mode; > int ret; > + const struct of_device_id *of_match = > + of_match_device(pdev->dev.driver->of_match_table, &pdev->dev); > + const struct stm32_spi_cfg *cfg = (const struct stm32_spi_cfg *)of_match->data; It seems you open-coded of_device_get_match_data(). Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-21 12:26 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-06-21 11:55 [PATCH 0/2] spi: stm32: disable spi device mode for stm32f4-f7 Valentin Caron 2023-06-21 11:55 ` Valentin Caron 2023-06-21 11:55 ` [PATCH 1/2] spi: stm32: disable device mode with st,stm32f4-spi compatible Valentin Caron 2023-06-21 11:55 ` Valentin Caron 2023-06-21 12:25 ` Krzysztof Kozlowski [this message] 2023-06-21 12:25 ` Krzysztof Kozlowski 2023-06-21 11:55 ` [PATCH 2/2] spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7 Valentin Caron 2023-06-21 11:55 ` Valentin Caron 2023-06-21 12:23 ` Krzysztof Kozlowski 2023-06-21 12:23 ` Krzysztof Kozlowski 2023-06-23 0:32 ` (subset) [PATCH 0/2] spi: stm32: disable spi device mode " Mark Brown 2023-06-23 0:32 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=29666c1f-c670-b38c-8555-e606771b480b@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=alain.volmat@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=broonie@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=robh+dt@kernel.org \ --cc=valentin.caron@foss.st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.