From: Wei Ni <wni@nvidia.com>
To: thierry.reding@gmail.com
Cc: daniel.lezcano@linaro.org, edubezval@gmail.com, robh@kernel.org,
linux-tegra@vger.kernel.org, rui.zhang@intel.com,
srikars@nvidia.com, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 03/12] arm64: dts: tegra210: set thermtrip
Date: Fri, 26 Apr 2019 11:21:05 +0800 [thread overview]
Message-ID: <2accde0e-6c6d-fdf9-44fe-479a4330729d@nvidia.com> (raw)
In-Reply-To: <1550744327-4677-4-git-send-email-wni@nvidia.com>
Hi Thierry,
Eduardo have picked this series to his branch except dts patches.
Please check
"git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git"
in the linus branch. They will be merged in the next major kernel release.
Could you please take these three dts changes?
Here is the list:
[PATCH v2 03/12] arm64: dts: tegra210: set thermtrip
[PATCH v2 06/12] arm64: dts: tegra210: set gpu hw throttle level
[PATCH v2 10/12] arm64: dts: tegra210: set EDP interrupt line
Thanks.
Wei.
On 21/2/2019 6:18 PM, Wei Ni wrote:
> Set "nvidia,thermtrips" property, it used to set
> HW shutdown temperatures.
>
> Signed-off-by: Wei Ni <wni@nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 6574396d2257..582d56820bbb 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -1410,6 +1410,9 @@
> reset-names = "soctherm";
> #thermal-sensor-cells = <1>;
>
> + nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500
> + TEGRA124_SOCTHERM_SENSOR_GPU 103000>;
> +
> throttle-cfgs {
> throttle_heavy: heavy {
> nvidia,priority = <100>;
> @@ -1429,8 +1432,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
>
> trips {
> - cpu-shutdown-trip {
> - temperature = <102500>;
> + cpu-critical-trip {
> + temperature = <102000>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1457,7 +1460,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
>
> trips {
> - mem-shutdown-trip {
> + mem-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
> @@ -1479,8 +1482,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
>
> trips {
> - gpu-shutdown-trip {
> - temperature = <103000>;
> + gpu-critical-trip {
> + temperature = <102500>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1507,7 +1510,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
>
> trips {
> - pllx-shutdown-trip {
> + pllx-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
>
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: <thierry.reding@gmail.com>
Cc: <daniel.lezcano@linaro.org>, <edubezval@gmail.com>,
<robh@kernel.org>, <linux-tegra@vger.kernel.org>,
<rui.zhang@intel.com>, <srikars@nvidia.com>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 03/12] arm64: dts: tegra210: set thermtrip
Date: Fri, 26 Apr 2019 11:21:05 +0800 [thread overview]
Message-ID: <2accde0e-6c6d-fdf9-44fe-479a4330729d@nvidia.com> (raw)
In-Reply-To: <1550744327-4677-4-git-send-email-wni@nvidia.com>
Hi Thierry,
Eduardo have picked this series to his branch except dts patches.
Please check
"git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git"
in the linus branch. They will be merged in the next major kernel release.
Could you please take these three dts changes?
Here is the list:
[PATCH v2 03/12] arm64: dts: tegra210: set thermtrip
[PATCH v2 06/12] arm64: dts: tegra210: set gpu hw throttle level
[PATCH v2 10/12] arm64: dts: tegra210: set EDP interrupt line
Thanks.
Wei.
On 21/2/2019 6:18 PM, Wei Ni wrote:
> Set "nvidia,thermtrips" property, it used to set
> HW shutdown temperatures.
>
> Signed-off-by: Wei Ni <wni@nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 6574396d2257..582d56820bbb 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -1410,6 +1410,9 @@
> reset-names = "soctherm";
> #thermal-sensor-cells = <1>;
>
> + nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500
> + TEGRA124_SOCTHERM_SENSOR_GPU 103000>;
> +
> throttle-cfgs {
> throttle_heavy: heavy {
> nvidia,priority = <100>;
> @@ -1429,8 +1432,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
>
> trips {
> - cpu-shutdown-trip {
> - temperature = <102500>;
> + cpu-critical-trip {
> + temperature = <102000>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1457,7 +1460,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
>
> trips {
> - mem-shutdown-trip {
> + mem-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
> @@ -1479,8 +1482,8 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
>
> trips {
> - gpu-shutdown-trip {
> - temperature = <103000>;
> + gpu-critical-trip {
> + temperature = <102500>;
> hysteresis = <0>;
> type = "critical";
> };
> @@ -1507,7 +1510,7 @@
> <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
>
> trips {
> - pllx-shutdown-trip {
> + pllx-critical-trip {
> temperature = <103000>;
> hysteresis = <0>;
> type = "critical";
>
next prev parent reply other threads:[~2019-04-26 3:21 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 10:18 [PATCH v2 00/12] Add some functionalities for Tegra soctherm Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 01/12] of: Add bindings of thermtrip " Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 02/12] thermal: tegra: support hw and sw shutdown Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 03/12] arm64: dts: tegra210: set thermtrip Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-04-26 3:21 ` Wei Ni [this message]
2019-04-26 3:21 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 04/12] of: Add bindings of gpu hw throttle for Tegra soctherm Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 05/12] thermal: tegra: add support for gpu hw-throttle Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 06/12] arm64: dts: tegra210: set gpu hw throttle level Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 07/12] thermal: tegra: add support for thermal IRQ Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 08/12] thermal: tegra: add set_trips functionality Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 09/12] thermal: tegra: add support for EDP IRQ Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 10/12] arm64: dts: tegra210: set EDP interrupt line Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 11/12] of: Add bindings of OC hw throttle for Tegra soctherm Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-02-21 10:18 ` [PATCH v2 12/12] thermal: tegra: enable OC hw throttle Wei Ni
2019-02-21 10:18 ` Wei Ni
2019-04-23 15:46 ` Eduardo Valentin
2019-04-24 8:36 ` Wei Ni
2019-04-24 8:36 ` Wei Ni
2019-04-24 9:49 ` Wei Ni
2019-04-24 9:49 ` Wei Ni
2019-03-26 2:17 ` [PATCH v2 00/12] Add some functionalities for Tegra soctherm Wei Ni
2019-03-26 2:17 ` Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2accde0e-6c6d-fdf9-44fe-479a4330729d@nvidia.com \
--to=wni@nvidia.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=srikars@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.