From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Yan <andyshrk@163.com>, heiko@sntech.de
Cc: krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
Date: Sun, 10 Dec 2023 12:12:15 +0100 [thread overview]
Message-ID: <2b58450a-1bde-424b-ab69-a3834914522c@linaro.org> (raw)
In-Reply-To: <20231210080629.1667589-1-andyshrk@163.com>
On 10/12/2023 09:06, Andy Yan wrote:
> Cool Pi CM5 EVB is a board based on rk3588.
>
> Specification:
> - Rockchip RK3588
> - LPDDR4 2/4/8/16 GB
> - TF scard slot
> - eMMC 8/32/64/128 GB module
> - Gigabit ethernet x 1 with PHY YT8531
> - Gigabit ethernet x 1 drived by PCIE with YT6801S
> - HDMI Type A out x 2
> - HDMI Type D in x 1
> - USB 2.0 Host x 2
> - USB 3.0 OTG x 1
> - USB 3.0 Host x 1
> - PCIE M.2 E Key for Wireless connection
> - PCIE M.2 M Key for NVME connection
> - 40 pin header
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc12v_dcin>;
> + pwms = <&pwm2 0 25000 0>;
> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_en>;
> + status = "okay";
This is a friendly reminder during the review process.
It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.
Thank you.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Yan <andyshrk@163.com>, heiko@sntech.de
Cc: krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
Date: Sun, 10 Dec 2023 12:12:15 +0100 [thread overview]
Message-ID: <2b58450a-1bde-424b-ab69-a3834914522c@linaro.org> (raw)
In-Reply-To: <20231210080629.1667589-1-andyshrk@163.com>
On 10/12/2023 09:06, Andy Yan wrote:
> Cool Pi CM5 EVB is a board based on rk3588.
>
> Specification:
> - Rockchip RK3588
> - LPDDR4 2/4/8/16 GB
> - TF scard slot
> - eMMC 8/32/64/128 GB module
> - Gigabit ethernet x 1 with PHY YT8531
> - Gigabit ethernet x 1 drived by PCIE with YT6801S
> - HDMI Type A out x 2
> - HDMI Type D in x 1
> - USB 2.0 Host x 2
> - USB 3.0 OTG x 1
> - USB 3.0 Host x 1
> - PCIE M.2 E Key for Wireless connection
> - PCIE M.2 M Key for NVME connection
> - 40 pin header
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc12v_dcin>;
> + pwms = <&pwm2 0 25000 0>;
> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_en>;
> + status = "okay";
This is a friendly reminder during the review process.
It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.
Thank you.
Best regards,
Krzysztof
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Yan <andyshrk@163.com>, heiko@sntech.de
Cc: krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
Date: Sun, 10 Dec 2023 12:12:15 +0100 [thread overview]
Message-ID: <2b58450a-1bde-424b-ab69-a3834914522c@linaro.org> (raw)
In-Reply-To: <20231210080629.1667589-1-andyshrk@163.com>
On 10/12/2023 09:06, Andy Yan wrote:
> Cool Pi CM5 EVB is a board based on rk3588.
>
> Specification:
> - Rockchip RK3588
> - LPDDR4 2/4/8/16 GB
> - TF scard slot
> - eMMC 8/32/64/128 GB module
> - Gigabit ethernet x 1 with PHY YT8531
> - Gigabit ethernet x 1 drived by PCIE with YT6801S
> - HDMI Type A out x 2
> - HDMI Type D in x 1
> - USB 2.0 Host x 2
> - USB 3.0 OTG x 1
> - USB 3.0 Host x 1
> - PCIE M.2 E Key for Wireless connection
> - PCIE M.2 M Key for NVME connection
> - 40 pin header
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc12v_dcin>;
> + pwms = <&pwm2 0 25000 0>;
> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_en>;
> + status = "okay";
This is a friendly reminder during the review process.
It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.
Thank you.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-10 11:12 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-10 8:03 [PATCH v2 0/5] Add 2 rk3588 based boards from Cool Pi Andy Yan
2023-12-10 8:03 ` Andy Yan
2023-12-10 8:03 ` Andy Yan
2023-12-10 8:03 ` [PATCH v2 1/5] dt-bindings: vendor-prefixes: Add " Andy Yan
2023-12-10 8:03 ` Andy Yan
2023-12-10 8:03 ` Andy Yan
2023-12-10 8:04 ` [PATCH v2 2/5] dt-bindings: arm: rockchip: Add Cool Pi 4B Andy Yan
2023-12-10 8:04 ` Andy Yan
2023-12-10 8:04 ` Andy Yan
2023-12-10 11:10 ` Krzysztof Kozlowski
2023-12-10 11:10 ` Krzysztof Kozlowski
2023-12-10 11:10 ` Krzysztof Kozlowski
2023-12-10 8:05 ` [PATCH v2 3/5] arm64: dts: rockchip: Add support for rk3588s based board " Andy Yan
2023-12-10 8:05 ` Andy Yan
2023-12-10 8:05 ` Andy Yan
2023-12-10 11:13 ` Krzysztof Kozlowski
2023-12-10 11:13 ` Krzysztof Kozlowski
2023-12-10 11:13 ` Krzysztof Kozlowski
2023-12-11 7:48 ` Andy Yan
2023-12-11 7:48 ` Andy Yan
2023-12-11 7:48 ` Andy Yan
2023-12-10 8:06 ` [PATCH v2 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB Andy Yan
2023-12-10 8:06 ` Andy Yan
2023-12-10 8:06 ` Andy Yan
2023-12-10 11:11 ` Krzysztof Kozlowski
2023-12-10 11:11 ` Krzysztof Kozlowski
2023-12-10 11:11 ` Krzysztof Kozlowski
2023-12-11 7:46 ` Andy Yan
2023-12-11 7:46 ` Andy Yan
2023-12-11 7:46 ` Andy Yan
2023-12-10 8:06 ` [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board " Andy Yan
2023-12-10 8:06 ` Andy Yan
2023-12-10 8:06 ` Andy Yan
2023-12-10 11:12 ` Krzysztof Kozlowski [this message]
2023-12-10 11:12 ` Krzysztof Kozlowski
2023-12-10 11:12 ` Krzysztof Kozlowski
2023-12-11 9:49 ` Andy Yan
2023-12-11 9:49 ` Andy Yan
2023-12-11 9:49 ` Andy Yan
2023-12-11 9:58 ` Krzysztof Kozlowski
2023-12-11 9:58 ` Krzysztof Kozlowski
2023-12-11 9:58 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2b58450a-1bde-424b-ab69-a3834914522c@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=andyshrk@163.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.