From: Adrian Hunter <adrian.hunter@intel.com>
To: Chun-Hung Wu <chun-hung.wu@mediatek.com>,
mirq-linux@rere.qmqm.pl, Jonathan Hunter <jonathanh@nvidia.com>,
Al Cooper <alcooperx@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michal Simek <michal.simek@xilinx.com>,
Thierry Reding <thierry.reding@gmail.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Pavel Machek <pavel@ucw.cz>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martin
Cc: kernel-team@android.com, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-mediatek@lists.infradead.org,
devicetree@vger.kernel.org, wsd_upstream@mediatek.com,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v6 3/4] mmc: mediatek: command queue support
Date: Wed, 1 Jul 2020 16:41:05 +0300 [thread overview]
Message-ID: <3c36a73a-a292-daae-baf6-19b3e3d7b208@intel.com> (raw)
In-Reply-To: <1591665502-6573-4-git-send-email-chun-hung.wu@mediatek.com>
On 9/06/20 4:18 am, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
> host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
> more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
> some of our platform does not support CQHCI hence no kernel option:
> CONFIG_MMC_CQHCI.
> #if IS_ENABLED(CONFIG_MMC_CQHCI)
> XXX //Support CQHCI
> #else
> XXX //Not support CQHCI
> #endif
Other drivers "select MMC_CQHCI" in Kconfig even though they support
hardware with or without CQHCI.
>
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/slot-gpio.h>
>
> +#include "cqhci.h"
> +
> #define MAX_BD_NUM 1024
>
> /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
> #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
>
> /* MSDC_INTEN mask */
> #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> @@ -182,6 +185,7 @@
> /* SDC_CFG mask */
> #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
> #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> #define SDC_CFG_SDIO (0x1 << 19) /* RW */
> #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> @@ -230,6 +234,7 @@
> #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
>
> #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
> #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
>
> #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
> /* cmd response sample selection for HS400 */
> bool hs400_mode; /* current eMMC will run at hs400 mode */
> bool internal_cd; /* Use internal card-detect logic */
> + bool cqhci; /* support eMMC hw cmdq */
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> + struct cqhci_host *cq_host;
> };
>
> static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
> (u32)(timeout > 255 ? 255 : timeout));
> }
>
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> + u64 timeout;
> +
> + timeout = msdc_timeout_cal(host, ns, clks);
> + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> + (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
> static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> pm_runtime_put_noidle(host->dev);
> }
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> + int cmd_err = 0, dat_err = 0;
> +
> + if (intsts & MSDC_INT_RSPCRCERR) {
> + cmd_err = -EILSEQ;
> + dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_CMDTMO) {
> + cmd_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> + }
> +
> + if (intsts & MSDC_INT_DATCRCERR) {
> + dat_err = -EILSEQ;
> + dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_DATTMO) {
> + dat_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> + }
> +
> + if (cmd_err || dat_err) {
> + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> + cmd_err, dat_err, intsts);
> + }
> +
> + return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> + (events & MSDC_INT_CMDQ)) {
> + msdc_cmdq_irq(host, events);
> + /* clear interrupts */
> + writel(events, host->base + MSDC_INT);
> + return IRQ_HANDLED;
> + }
> +#endif
> +
> if (!mrq) {
> dev_err(host->dev,
> "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
> return !val;
> }
>
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* enable cmdq irq */
> + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> + /* enable busy check */
> + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> + /* default write data / busy timeout 20s */
> + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> + /* default read data timeout 1s */
> + msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* disable cmdq irq */
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> + /* disable busy check */
> + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> + if (recovery) {
> + sdr_set_field(host->base + MSDC_DMA_CTRL,
> + MSDC_DMA_CTRL_STOP, 1);
> + msdc_reset_hw(host);
> + }
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
> .hw_reset = msdc_hw_reset,
> };
>
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> + .enable = msdc_cqe_enable,
> + .disable = msdc_cqe_disable,
> +};
> +
> static void msdc_of_property_parse(struct platform_device *pdev,
> struct msdc_host *host)
> {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
> host->hs400_cmd_resp_sel_rising = true;
> else
> host->hs400_cmd_resp_sel_rising = false;
> +
> + if (of_property_read_bool(pdev->dev.of_node,
> + "mediatek,cqhci"))
> + host->cqhci = true;
> + else
> + host->cqhci = false;
> }
>
> static int msdc_drv_probe(struct platform_device *pdev)
> @@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
> mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> + if (host->cqhci)
> + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> /* MMC core transfer sizes tunable parameters */
> mmc->max_segs = MAX_BD_NUM;
> if (host->dev_comp->support_64g)
> @@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if (mmc->caps2 & MMC_CAP2_CQE) {
> + host->cq_host = devm_kzalloc(host->mmc->parent,
> + sizeof(*host->cq_host),
> + GFP_KERNEL);
> + if (!host->cq_host) {
> + ret = -ENOMEM;
> + goto host_free;
> + }
> + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + host->cq_host->mmio = host->base + 0x800;
> + host->cq_host->ops = &msdc_cmdq_ops;
> + cqhci_init(host->cq_host, mmc, true);
cqhci_init() can return an error.
> + mmc->max_segs = 128;
> + /* cqhci 16bit length */
> + /* 0 size, means 65536 so we don't have to -1 here */
> + mmc->max_seg_size = 64 * 1024;
> + }
> +#endif
> +
> host->timeout_clks = 3 * 1048576;
> host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> 2 * sizeof(struct mt_gpdma_desc),
>
WARNING: multiple messages have this Message-ID (diff)
From: Adrian Hunter <adrian.hunter@intel.com>
To: Chun-Hung Wu <chun-hung.wu@mediatek.com>,
mirq-linux@rere.qmqm.pl, Jonathan Hunter <jonathanh@nvidia.com>,
Al Cooper <alcooperx@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michal Simek <michal.simek@xilinx.com>,
Thierry Reding <thierry.reding@gmail.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Pavel Machek <pavel@ucw.cz>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Pan Bian <bianpan2016@163.com>,
Thomas Gleixner <tglx@linutronix.de>,
Allison Randal <allison@lohutok.net>,
Mathieu Malaterre <malat@debian.org>,
Stanley Chu <stanley.chu@mediatek.com>,
Kuohong Wang <kuohong.wang@mediatek.com>
Cc: kernel-team@android.com, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-mediatek@lists.infradead.org,
devicetree@vger.kernel.org, wsd_upstream@mediatek.com,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v6 3/4] mmc: mediatek: command queue support
Date: Wed, 1 Jul 2020 16:41:05 +0300 [thread overview]
Message-ID: <3c36a73a-a292-daae-baf6-19b3e3d7b208@intel.com> (raw)
In-Reply-To: <1591665502-6573-4-git-send-email-chun-hung.wu@mediatek.com>
On 9/06/20 4:18 am, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
> host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
> more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
> some of our platform does not support CQHCI hence no kernel option:
> CONFIG_MMC_CQHCI.
> #if IS_ENABLED(CONFIG_MMC_CQHCI)
> XXX //Support CQHCI
> #else
> XXX //Not support CQHCI
> #endif
Other drivers "select MMC_CQHCI" in Kconfig even though they support
hardware with or without CQHCI.
>
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/slot-gpio.h>
>
> +#include "cqhci.h"
> +
> #define MAX_BD_NUM 1024
>
> /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
> #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
>
> /* MSDC_INTEN mask */
> #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> @@ -182,6 +185,7 @@
> /* SDC_CFG mask */
> #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
> #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> #define SDC_CFG_SDIO (0x1 << 19) /* RW */
> #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> @@ -230,6 +234,7 @@
> #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
>
> #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
> #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
>
> #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
> /* cmd response sample selection for HS400 */
> bool hs400_mode; /* current eMMC will run at hs400 mode */
> bool internal_cd; /* Use internal card-detect logic */
> + bool cqhci; /* support eMMC hw cmdq */
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> + struct cqhci_host *cq_host;
> };
>
> static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
> (u32)(timeout > 255 ? 255 : timeout));
> }
>
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> + u64 timeout;
> +
> + timeout = msdc_timeout_cal(host, ns, clks);
> + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> + (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
> static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> pm_runtime_put_noidle(host->dev);
> }
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> + int cmd_err = 0, dat_err = 0;
> +
> + if (intsts & MSDC_INT_RSPCRCERR) {
> + cmd_err = -EILSEQ;
> + dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_CMDTMO) {
> + cmd_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> + }
> +
> + if (intsts & MSDC_INT_DATCRCERR) {
> + dat_err = -EILSEQ;
> + dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_DATTMO) {
> + dat_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> + }
> +
> + if (cmd_err || dat_err) {
> + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> + cmd_err, dat_err, intsts);
> + }
> +
> + return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> + (events & MSDC_INT_CMDQ)) {
> + msdc_cmdq_irq(host, events);
> + /* clear interrupts */
> + writel(events, host->base + MSDC_INT);
> + return IRQ_HANDLED;
> + }
> +#endif
> +
> if (!mrq) {
> dev_err(host->dev,
> "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
> return !val;
> }
>
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* enable cmdq irq */
> + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> + /* enable busy check */
> + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> + /* default write data / busy timeout 20s */
> + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> + /* default read data timeout 1s */
> + msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* disable cmdq irq */
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> + /* disable busy check */
> + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> + if (recovery) {
> + sdr_set_field(host->base + MSDC_DMA_CTRL,
> + MSDC_DMA_CTRL_STOP, 1);
> + msdc_reset_hw(host);
> + }
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
> .hw_reset = msdc_hw_reset,
> };
>
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> + .enable = msdc_cqe_enable,
> + .disable = msdc_cqe_disable,
> +};
> +
> static void msdc_of_property_parse(struct platform_device *pdev,
> struct msdc_host *host)
> {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
> host->hs400_cmd_resp_sel_rising = true;
> else
> host->hs400_cmd_resp_sel_rising = false;
> +
> + if (of_property_read_bool(pdev->dev.of_node,
> + "mediatek,cqhci"))
> + host->cqhci = true;
> + else
> + host->cqhci = false;
> }
>
> static int msdc_drv_probe(struct platform_device *pdev)
> @@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
> mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> + if (host->cqhci)
> + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> /* MMC core transfer sizes tunable parameters */
> mmc->max_segs = MAX_BD_NUM;
> if (host->dev_comp->support_64g)
> @@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if (mmc->caps2 & MMC_CAP2_CQE) {
> + host->cq_host = devm_kzalloc(host->mmc->parent,
> + sizeof(*host->cq_host),
> + GFP_KERNEL);
> + if (!host->cq_host) {
> + ret = -ENOMEM;
> + goto host_free;
> + }
> + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + host->cq_host->mmio = host->base + 0x800;
> + host->cq_host->ops = &msdc_cmdq_ops;
> + cqhci_init(host->cq_host, mmc, true);
cqhci_init() can return an error.
> + mmc->max_segs = 128;
> + /* cqhci 16bit length */
> + /* 0 size, means 65536 so we don't have to -1 here */
> + mmc->max_seg_size = 64 * 1024;
> + }
> +#endif
> +
> host->timeout_clks = 3 * 1048576;
> host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> 2 * sizeof(struct mt_gpdma_desc),
>
WARNING: multiple messages have this Message-ID (diff)
From: Adrian Hunter <adrian.hunter@intel.com>
To: Chun-Hung Wu <chun-hung.wu@mediatek.com>,
mirq-linux@rere.qmqm.pl, Jonathan Hunter <jonathanh@nvidia.com>,
Al Cooper <alcooperx@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michal Simek <michal.simek@xilinx.com>,
Thierry Reding <thierry.reding@gmail.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Pavel Machek <pavel@ucw.cz>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Pan Bian <bianpan2016@163.com>,
Thomas Gleixner <tglx@linutronix.de>,
Allison Randal <allison@lohutok.net>,
Mathieu Malaterre <malat@debian.org>,
Stanley Chu <stanley.chu@mediatek.com>,
Kuohong Wang <kuohong.wang@mediatek.com>
Cc: devicetree@vger.kernel.org, wsd_upstream@mediatek.com,
linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-tegra@vger.kernel.org, kernel-team@android.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 3/4] mmc: mediatek: command queue support
Date: Wed, 1 Jul 2020 16:41:05 +0300 [thread overview]
Message-ID: <3c36a73a-a292-daae-baf6-19b3e3d7b208@intel.com> (raw)
In-Reply-To: <1591665502-6573-4-git-send-email-chun-hung.wu@mediatek.com>
On 9/06/20 4:18 am, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
> host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
> more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
> some of our platform does not support CQHCI hence no kernel option:
> CONFIG_MMC_CQHCI.
> #if IS_ENABLED(CONFIG_MMC_CQHCI)
> XXX //Support CQHCI
> #else
> XXX //Not support CQHCI
> #endif
Other drivers "select MMC_CQHCI" in Kconfig even though they support
hardware with or without CQHCI.
>
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/slot-gpio.h>
>
> +#include "cqhci.h"
> +
> #define MAX_BD_NUM 1024
>
> /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
> #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
>
> /* MSDC_INTEN mask */
> #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> @@ -182,6 +185,7 @@
> /* SDC_CFG mask */
> #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
> #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> #define SDC_CFG_SDIO (0x1 << 19) /* RW */
> #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> @@ -230,6 +234,7 @@
> #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
>
> #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
> #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
>
> #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
> /* cmd response sample selection for HS400 */
> bool hs400_mode; /* current eMMC will run at hs400 mode */
> bool internal_cd; /* Use internal card-detect logic */
> + bool cqhci; /* support eMMC hw cmdq */
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> + struct cqhci_host *cq_host;
> };
>
> static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
> (u32)(timeout > 255 ? 255 : timeout));
> }
>
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> + u64 timeout;
> +
> + timeout = msdc_timeout_cal(host, ns, clks);
> + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> + (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
> static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> pm_runtime_put_noidle(host->dev);
> }
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> + int cmd_err = 0, dat_err = 0;
> +
> + if (intsts & MSDC_INT_RSPCRCERR) {
> + cmd_err = -EILSEQ;
> + dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_CMDTMO) {
> + cmd_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> + }
> +
> + if (intsts & MSDC_INT_DATCRCERR) {
> + dat_err = -EILSEQ;
> + dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_DATTMO) {
> + dat_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> + }
> +
> + if (cmd_err || dat_err) {
> + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> + cmd_err, dat_err, intsts);
> + }
> +
> + return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> + (events & MSDC_INT_CMDQ)) {
> + msdc_cmdq_irq(host, events);
> + /* clear interrupts */
> + writel(events, host->base + MSDC_INT);
> + return IRQ_HANDLED;
> + }
> +#endif
> +
> if (!mrq) {
> dev_err(host->dev,
> "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
> return !val;
> }
>
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* enable cmdq irq */
> + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> + /* enable busy check */
> + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> + /* default write data / busy timeout 20s */
> + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> + /* default read data timeout 1s */
> + msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* disable cmdq irq */
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> + /* disable busy check */
> + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> + if (recovery) {
> + sdr_set_field(host->base + MSDC_DMA_CTRL,
> + MSDC_DMA_CTRL_STOP, 1);
> + msdc_reset_hw(host);
> + }
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
> .hw_reset = msdc_hw_reset,
> };
>
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> + .enable = msdc_cqe_enable,
> + .disable = msdc_cqe_disable,
> +};
> +
> static void msdc_of_property_parse(struct platform_device *pdev,
> struct msdc_host *host)
> {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
> host->hs400_cmd_resp_sel_rising = true;
> else
> host->hs400_cmd_resp_sel_rising = false;
> +
> + if (of_property_read_bool(pdev->dev.of_node,
> + "mediatek,cqhci"))
> + host->cqhci = true;
> + else
> + host->cqhci = false;
> }
>
> static int msdc_drv_probe(struct platform_device *pdev)
> @@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
> mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> + if (host->cqhci)
> + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> /* MMC core transfer sizes tunable parameters */
> mmc->max_segs = MAX_BD_NUM;
> if (host->dev_comp->support_64g)
> @@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if (mmc->caps2 & MMC_CAP2_CQE) {
> + host->cq_host = devm_kzalloc(host->mmc->parent,
> + sizeof(*host->cq_host),
> + GFP_KERNEL);
> + if (!host->cq_host) {
> + ret = -ENOMEM;
> + goto host_free;
> + }
> + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + host->cq_host->mmio = host->base + 0x800;
> + host->cq_host->ops = &msdc_cmdq_ops;
> + cqhci_init(host->cq_host, mmc, true);
cqhci_init() can return an error.
> + mmc->max_segs = 128;
> + /* cqhci 16bit length */
> + /* 0 size, means 65536 so we don't have to -1 here */
> + mmc->max_seg_size = 64 * 1024;
> + }
> +#endif
> +
> host->timeout_clks = 3 * 1048576;
> host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> 2 * sizeof(struct mt_gpdma_desc),
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Adrian Hunter <adrian.hunter@intel.com>
To: Chun-Hung Wu <chun-hung.wu@mediatek.com>,
mirq-linux@rere.qmqm.pl, Jonathan Hunter <jonathanh@nvidia.com>,
Al Cooper <alcooperx@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michal Simek <michal.simek@xilinx.com>,
Thierry Reding <thierry.reding@gmail.com>,
Chaotian Jing <chaotian.jing@mediatek.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Pavel Machek <pavel@ucw.cz>,
Kate Stewart <kstewart@linuxfoundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Pan Bian <bianpan2016@163.com>,
Thomas Gleixner <tglx@linutronix.de>,
Allison Randal <allison@lohutok.net>,
Mathieu Malaterre <malat@debian.org>,
Stanley Chu <stanley.chu@mediatek.com>,
Kuohong Wang <kuohong.wang@mediatek.com>
Cc: devicetree@vger.kernel.org, wsd_upstream@mediatek.com,
linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-tegra@vger.kernel.org, kernel-team@android.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 3/4] mmc: mediatek: command queue support
Date: Wed, 1 Jul 2020 16:41:05 +0300 [thread overview]
Message-ID: <3c36a73a-a292-daae-baf6-19b3e3d7b208@intel.com> (raw)
In-Reply-To: <1591665502-6573-4-git-send-email-chun-hung.wu@mediatek.com>
On 9/06/20 4:18 am, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
> host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
> more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
> some of our platform does not support CQHCI hence no kernel option:
> CONFIG_MMC_CQHCI.
> #if IS_ENABLED(CONFIG_MMC_CQHCI)
> XXX //Support CQHCI
> #else
> XXX //Not support CQHCI
> #endif
Other drivers "select MMC_CQHCI" in Kconfig even though they support
hardware with or without CQHCI.
>
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/slot-gpio.h>
>
> +#include "cqhci.h"
> +
> #define MAX_BD_NUM 1024
>
> /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
> #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
>
> /* MSDC_INTEN mask */
> #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> @@ -182,6 +185,7 @@
> /* SDC_CFG mask */
> #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
> #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> #define SDC_CFG_SDIO (0x1 << 19) /* RW */
> #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> @@ -230,6 +234,7 @@
> #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
>
> #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
> #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
>
> #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
> /* cmd response sample selection for HS400 */
> bool hs400_mode; /* current eMMC will run at hs400 mode */
> bool internal_cd; /* Use internal card-detect logic */
> + bool cqhci; /* support eMMC hw cmdq */
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> + struct cqhci_host *cq_host;
> };
>
> static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
> (u32)(timeout > 255 ? 255 : timeout));
> }
>
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> + u64 timeout;
> +
> + timeout = msdc_timeout_cal(host, ns, clks);
> + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> + (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
> static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> pm_runtime_put_noidle(host->dev);
> }
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> + int cmd_err = 0, dat_err = 0;
> +
> + if (intsts & MSDC_INT_RSPCRCERR) {
> + cmd_err = -EILSEQ;
> + dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_CMDTMO) {
> + cmd_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> + }
> +
> + if (intsts & MSDC_INT_DATCRCERR) {
> + dat_err = -EILSEQ;
> + dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_DATTMO) {
> + dat_err = -ETIMEDOUT;
> + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> + }
> +
> + if (cmd_err || dat_err) {
> + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> + cmd_err, dat_err, intsts);
> + }
> +
> + return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> + (events & MSDC_INT_CMDQ)) {
> + msdc_cmdq_irq(host, events);
> + /* clear interrupts */
> + writel(events, host->base + MSDC_INT);
> + return IRQ_HANDLED;
> + }
> +#endif
> +
> if (!mrq) {
> dev_err(host->dev,
> "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
> return !val;
> }
>
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* enable cmdq irq */
> + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> + /* enable busy check */
> + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> + /* default write data / busy timeout 20s */
> + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> + /* default read data timeout 1s */
> + msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* disable cmdq irq */
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> + /* disable busy check */
> + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> + if (recovery) {
> + sdr_set_field(host->base + MSDC_DMA_CTRL,
> + MSDC_DMA_CTRL_STOP, 1);
> + msdc_reset_hw(host);
> + }
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
> .hw_reset = msdc_hw_reset,
> };
>
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> + .enable = msdc_cqe_enable,
> + .disable = msdc_cqe_disable,
> +};
> +
> static void msdc_of_property_parse(struct platform_device *pdev,
> struct msdc_host *host)
> {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
> host->hs400_cmd_resp_sel_rising = true;
> else
> host->hs400_cmd_resp_sel_rising = false;
> +
> + if (of_property_read_bool(pdev->dev.of_node,
> + "mediatek,cqhci"))
> + host->cqhci = true;
> + else
> + host->cqhci = false;
> }
>
> static int msdc_drv_probe(struct platform_device *pdev)
> @@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
> mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> + if (host->cqhci)
> + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> /* MMC core transfer sizes tunable parameters */
> mmc->max_segs = MAX_BD_NUM;
> if (host->dev_comp->support_64g)
> @@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if (mmc->caps2 & MMC_CAP2_CQE) {
> + host->cq_host = devm_kzalloc(host->mmc->parent,
> + sizeof(*host->cq_host),
> + GFP_KERNEL);
> + if (!host->cq_host) {
> + ret = -ENOMEM;
> + goto host_free;
> + }
> + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + host->cq_host->mmio = host->base + 0x800;
> + host->cq_host->ops = &msdc_cmdq_ops;
> + cqhci_init(host->cq_host, mmc, true);
cqhci_init() can return an error.
> + mmc->max_segs = 128;
> + /* cqhci 16bit length */
> + /* 0 size, means 65536 so we don't have to -1 here */
> + mmc->max_seg_size = 64 * 1024;
> + }
> +#endif
> +
> host->timeout_clks = 3 * 1048576;
> host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> 2 * sizeof(struct mt_gpdma_desc),
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-01 13:41 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 1:18 [PATCH v6 0/4] mmc: mediatek: add mmc cqhci support Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` [PATCH v6 2/4] mmc: mediatek: refine msdc timeout api Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
[not found] ` <1591665502-6573-1-git-send-email-chun-hung.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2020-06-09 1:18 ` [PATCH v6 1/4] mmc: mediatek: add MT6779 MMC driver support Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 11:25 ` Matthias Brugger
2020-06-09 11:25 ` Matthias Brugger
2020-06-09 11:25 ` Matthias Brugger
2020-06-09 11:25 ` Matthias Brugger
2020-06-09 1:18 ` [PATCH v6 3/4] mmc: mediatek: command queue support Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 11:28 ` Matthias Brugger
2020-06-09 11:28 ` Matthias Brugger
2020-06-09 11:28 ` Matthias Brugger
2020-06-09 11:28 ` Matthias Brugger
2020-07-20 8:21 ` Chun-Hung Wu
2020-07-20 8:21 ` Chun-Hung Wu
2020-07-01 13:41 ` Adrian Hunter [this message]
2020-07-01 13:41 ` Adrian Hunter
2020-07-01 13:41 ` Adrian Hunter
2020-07-01 13:41 ` Adrian Hunter
2020-06-09 1:18 ` [PATCH v6 4/4] dt-bindings: mmc: mediatek: Add document for mt6779 Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
2020-06-09 1:18 ` Chun-Hung Wu
[not found] ` <1591665502-6573-5-git-send-email-chun-hung.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2020-06-17 21:02 ` Rob Herring
2020-06-17 21:02 ` Rob Herring
2020-06-17 21:02 ` Rob Herring
2020-06-17 21:02 ` Rob Herring
2020-07-20 8:22 ` Chun-Hung Wu
2020-07-20 8:22 ` Chun-Hung Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c36a73a-a292-daae-baf6-19b3e3d7b208@intel.com \
--to=adrian.hunter@intel.com \
--cc=agross@kernel.org \
--cc=alcooperx@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bjorn.andersson@linaro.org \
--cc=chaotian.jing@mediatek.com \
--cc=chun-hung.wu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kernel-team@android.com \
--cc=kstewart@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=michal.simek@xilinx.com \
--cc=mirq-linux@rere.qmqm.pl \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.