From: Akira Tsukamoto <akira.tsukamoto@gmail.com> To: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org Subject: [PATCH 5/5] riscv: __asm_to/copy_from_user: Bulk copy when both src, dst are aligned Date: Sat, 19 Jun 2021 20:43:06 +0900 [thread overview] Message-ID: <4637f0f2-2da9-1056-37bf-17c0861b6bff@gmail.com> (raw) In-Reply-To: <5a5c07ac-8c11-79d3-46a3-a255d4148f76@gmail.com> In the lucky situation that the both source and destination address are on the aligned boundary, perform load and store with register size to copy the data. Without the unrolling, it will reduce the speed since the next store instruction for the same register using from the load will stall the pipeline. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> --- arch/riscv/lib/uaccess.S | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S index e2e57551fc76..bceb0629e440 100644 --- a/arch/riscv/lib/uaccess.S +++ b/arch/riscv/lib/uaccess.S @@ -67,6 +67,39 @@ ENTRY(__asm_copy_from_user) bnez a3, .Lshift_copy .Lword_copy: + /* + * Both src and dst are aligned, unrolled word copy + * + * a0 - start of aligned dst + * a1 - start of aligned src + * a3 - a1 & mask:(SZREG-1) + * t0 - end of aligned dst + */ + addi t0, t0, -(8*SZREG-1) /* not to over run */ +2: + fixup REG_L a4, 0(a1), 10f + fixup REG_L a5, SZREG(a1), 10f + fixup REG_L a6, 2*SZREG(a1), 10f + fixup REG_L a7, 3*SZREG(a1), 10f + fixup REG_L t1, 4*SZREG(a1), 10f + fixup REG_L t2, 5*SZREG(a1), 10f + fixup REG_L t3, 6*SZREG(a1), 10f + fixup REG_L t4, 7*SZREG(a1), 10f + fixup REG_S a4, 0(a0), 10f + fixup REG_S a5, SZREG(a0), 10f + fixup REG_S a6, 2*SZREG(a0), 10f + fixup REG_S a7, 3*SZREG(a0), 10f + fixup REG_S t1, 4*SZREG(a0), 10f + fixup REG_S t2, 5*SZREG(a0), 10f + fixup REG_S t3, 6*SZREG(a0), 10f + fixup REG_S t4, 7*SZREG(a0), 10f + addi a0, a0, 8*SZREG + addi a1, a1, 8*SZREG + bltu a0, t0, 2b + + addi t0, t0, 8*SZREG-1 /* revert to original value */ + j .Lbyte_copy_tail + .Lshift_copy: /* -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Akira Tsukamoto <akira.tsukamoto@gmail.com> To: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org Subject: [PATCH 5/5] riscv: __asm_to/copy_from_user: Bulk copy when both src, dst are aligned Date: Sat, 19 Jun 2021 20:43:06 +0900 [thread overview] Message-ID: <4637f0f2-2da9-1056-37bf-17c0861b6bff@gmail.com> (raw) In-Reply-To: <5a5c07ac-8c11-79d3-46a3-a255d4148f76@gmail.com> In the lucky situation that the both source and destination address are on the aligned boundary, perform load and store with register size to copy the data. Without the unrolling, it will reduce the speed since the next store instruction for the same register using from the load will stall the pipeline. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> --- arch/riscv/lib/uaccess.S | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S index e2e57551fc76..bceb0629e440 100644 --- a/arch/riscv/lib/uaccess.S +++ b/arch/riscv/lib/uaccess.S @@ -67,6 +67,39 @@ ENTRY(__asm_copy_from_user) bnez a3, .Lshift_copy .Lword_copy: + /* + * Both src and dst are aligned, unrolled word copy + * + * a0 - start of aligned dst + * a1 - start of aligned src + * a3 - a1 & mask:(SZREG-1) + * t0 - end of aligned dst + */ + addi t0, t0, -(8*SZREG-1) /* not to over run */ +2: + fixup REG_L a4, 0(a1), 10f + fixup REG_L a5, SZREG(a1), 10f + fixup REG_L a6, 2*SZREG(a1), 10f + fixup REG_L a7, 3*SZREG(a1), 10f + fixup REG_L t1, 4*SZREG(a1), 10f + fixup REG_L t2, 5*SZREG(a1), 10f + fixup REG_L t3, 6*SZREG(a1), 10f + fixup REG_L t4, 7*SZREG(a1), 10f + fixup REG_S a4, 0(a0), 10f + fixup REG_S a5, SZREG(a0), 10f + fixup REG_S a6, 2*SZREG(a0), 10f + fixup REG_S a7, 3*SZREG(a0), 10f + fixup REG_S t1, 4*SZREG(a0), 10f + fixup REG_S t2, 5*SZREG(a0), 10f + fixup REG_S t3, 6*SZREG(a0), 10f + fixup REG_S t4, 7*SZREG(a0), 10f + addi a0, a0, 8*SZREG + addi a1, a1, 8*SZREG + bltu a0, t0, 2b + + addi t0, t0, 8*SZREG-1 /* revert to original value */ + j .Lbyte_copy_tail + .Lshift_copy: /* -- 2.17.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2021-06-19 11:50 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-19 11:21 [PATCH v2 0/5] riscv: improving uaccess with logs from network bench Akira Tsukamoto 2021-06-19 11:21 ` Akira Tsukamoto 2021-06-19 11:34 ` [PATCH 1/5] riscv: __asm_to/copy_from_user: delete existing code Akira Tsukamoto 2021-06-19 11:34 ` Akira Tsukamoto 2021-06-21 11:45 ` David Laight 2021-06-21 11:45 ` David Laight 2021-06-21 13:55 ` Akira Tsukamoto 2021-06-21 13:55 ` Akira Tsukamoto 2021-06-19 11:35 ` [PATCH 2/5] riscv: __asm_to/copy_from_user: Adding byte copy first Akira Tsukamoto 2021-06-19 11:35 ` Akira Tsukamoto 2021-06-19 11:36 ` [PATCH 3/5] riscv: __asm_to/copy_from_user: Copy until dst is aligned Akira Tsukamoto 2021-06-19 11:36 ` Akira Tsukamoto 2021-06-19 11:37 ` [PATCH 4/5] riscv: __asm_to/copy_from_user: Bulk copy while shifting Akira Tsukamoto 2021-06-19 11:37 ` Akira Tsukamoto 2021-06-19 11:43 ` Akira Tsukamoto [this message] 2021-06-19 11:43 ` [PATCH 5/5] riscv: __asm_to/copy_from_user: Bulk copy when both src, dst are aligned Akira Tsukamoto 2021-06-21 11:55 ` David Laight 2021-06-21 11:55 ` David Laight 2021-06-21 14:13 ` Akira Tsukamoto 2021-06-21 14:13 ` Akira Tsukamoto 2021-06-20 10:02 ` [PATCH v2 0/5] riscv: improving uaccess with logs from network bench Ben Dooks 2021-06-20 10:02 ` Ben Dooks 2021-06-20 16:36 ` Akira Tsukamoto 2021-06-20 16:36 ` Akira Tsukamoto 2021-06-22 8:30 ` Ben Dooks 2021-06-22 8:30 ` Ben Dooks 2021-06-22 12:05 ` Akira Tsukamoto 2021-06-22 12:05 ` Akira Tsukamoto 2021-06-22 17:45 ` Ben Dooks 2021-06-22 17:45 ` Ben Dooks 2021-07-12 21:24 ` Ben Dooks 2021-07-12 21:24 ` Ben Dooks
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4637f0f2-2da9-1056-37bf-17c0861b6bff@gmail.com \ --to=akira.tsukamoto@gmail.com \ --cc=aou@eecs.berkeley.edu \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.