From: Anthony Liguori <anthony@codemonkey.ws>
To: Avi Kivity <avi@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
Mark McLoughlin <markmc@redhat.com>,
Jamie Lokier <jamie@shareable.org>,
Carsten Otte <cotte@de.ibm.com>,
kvm@vger.kernel.org, Glauber Costa <glommer@redhat.com>,
Rusty Russell <rusty@rustcorp.com.au>,
qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
Blue Swirl <blauwirbel@gmail.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Paul Brook <paul@codesourcery.com>
Subject: Re: Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities]
Date: Mon, 15 Jun 2009 08:20:27 -0500 [thread overview]
Message-ID: <4A364A9B.9070001@codemonkey.ws> (raw)
In-Reply-To: <4A364698.1090402@redhat.com>
Avi Kivity wrote:
> On 06/15/2009 03:45 PM, Anthony Liguori wrote:
>>>> This last option makes sense to me: in a real world the user has
>>>> control over where he places the device on the bus, so why
>>>> not with qemu?
>>>
>>> Yes, the user build the machine using the command line and monitor
>>> (or, in 2017, the machine configuration file),
>>
>>
>> Considering pbrook just posted a machine config for arm, I think it
>> would be rather sad if pc wasn't converted to it by 2017...
>
> I'd be sad too, but not surprised.
>
>>> then turns on the power. Command line options are the parts lying
>>> around when we start.
>>>
>>> btw, -drive needs to be separated:
>>>
>>> -controller type=lsi1234,pci_addr=foobar,name=blah
>>> -drive file=foo.img,controller=blah,index=0
>>> -drive file=bar.img,controller=blah,index=1
>>>
>>> Drives to not have pci addresses.
>>
>> Drivers don't have indexes and buses but we specify it on the -drive
>> line.
>
> Drives do have indexes. On old parallel scsi drives you set the index
> by clicking a button on the back of the drive to cycle through scsi
> addresses 0-7. An IDE drive's index is determined by the cable
> (master/slave). A SATA drive's index is determined by which header on
> the motherboard the drive connects to.
It's not at all that simple. SCSI has a hierarchical address mechanism
with 0-7 targets but then potentially multiple LUNs per target. Today,
we always emulate a single LUN per target but if we ever wanted to
support more than 7 disks on a SCSI controller, we would have to add
multiple LUN support too. So the current linear unit= parameter is
actually pretty broken for SCSI.
For IDE, it's a combination of bus, slot, and master/slave. For virtio,
it's just a PCI address. What we really need is something that is more
opaque and controller specific. For instance, if we were going to do
controllers...
-controller type=lsi1234,pci_addr=foobar,name=blah
-controller-disk controller=blah,target=0,lun=1,name=sda
-controller type=ide,pci_addr=barfoo,name=ide
-controller-disk controller=ide,slot=secondary,cable=slave,name=hdd
-drive file=foo.img,controller-disk=sda
-drive file=bar.img,controller-disk=hdd
And having "-hdd file=foo.img" be short-hand for "-drive
file=%s,controller-disk=%s".
>
>
> If by bus you mean the if= parameter, then drives certainly do have
> buses. Just try connecting the scsi drive from the previous paragraph
> to a USB port.
No, I meant drive file=foo.img,bus=3. If that doesn't seem obvious what
it should do to you that's because it isn't at all obvious :-) It ends
up skipping a predefined number of locations in the drive table. This
is pretty broken fundamentally because it assumes controllers always
support a fixed number of devices. Nothing really respects bus_id
though so in practice, I assume it's almost universally broken.
Regards,
Anthony Liguori
WARNING: multiple messages have this Message-ID (diff)
From: Anthony Liguori <anthony@codemonkey.ws>
To: Avi Kivity <avi@redhat.com>
Cc: Carsten Otte <cotte@de.ibm.com>,
Rusty Russell <rusty@rustcorp.com.au>,
kvm@vger.kernel.org, Mark McLoughlin <markmc@redhat.com>,
Glauber Costa <glommer@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
Blue Swirl <blauwirbel@gmail.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Paul Brook <paul@codesourcery.com>
Subject: Re: Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities]
Date: Mon, 15 Jun 2009 08:20:27 -0500 [thread overview]
Message-ID: <4A364A9B.9070001@codemonkey.ws> (raw)
In-Reply-To: <4A364698.1090402@redhat.com>
Avi Kivity wrote:
> On 06/15/2009 03:45 PM, Anthony Liguori wrote:
>>>> This last option makes sense to me: in a real world the user has
>>>> control over where he places the device on the bus, so why
>>>> not with qemu?
>>>
>>> Yes, the user build the machine using the command line and monitor
>>> (or, in 2017, the machine configuration file),
>>
>>
>> Considering pbrook just posted a machine config for arm, I think it
>> would be rather sad if pc wasn't converted to it by 2017...
>
> I'd be sad too, but not surprised.
>
>>> then turns on the power. Command line options are the parts lying
>>> around when we start.
>>>
>>> btw, -drive needs to be separated:
>>>
>>> -controller type=lsi1234,pci_addr=foobar,name=blah
>>> -drive file=foo.img,controller=blah,index=0
>>> -drive file=bar.img,controller=blah,index=1
>>>
>>> Drives to not have pci addresses.
>>
>> Drivers don't have indexes and buses but we specify it on the -drive
>> line.
>
> Drives do have indexes. On old parallel scsi drives you set the index
> by clicking a button on the back of the drive to cycle through scsi
> addresses 0-7. An IDE drive's index is determined by the cable
> (master/slave). A SATA drive's index is determined by which header on
> the motherboard the drive connects to.
It's not at all that simple. SCSI has a hierarchical address mechanism
with 0-7 targets but then potentially multiple LUNs per target. Today,
we always emulate a single LUN per target but if we ever wanted to
support more than 7 disks on a SCSI controller, we would have to add
multiple LUN support too. So the current linear unit= parameter is
actually pretty broken for SCSI.
For IDE, it's a combination of bus, slot, and master/slave. For virtio,
it's just a PCI address. What we really need is something that is more
opaque and controller specific. For instance, if we were going to do
controllers...
-controller type=lsi1234,pci_addr=foobar,name=blah
-controller-disk controller=blah,target=0,lun=1,name=sda
-controller type=ide,pci_addr=barfoo,name=ide
-controller-disk controller=ide,slot=secondary,cable=slave,name=hdd
-drive file=foo.img,controller-disk=sda
-drive file=bar.img,controller-disk=hdd
And having "-hdd file=foo.img" be short-hand for "-drive
file=%s,controller-disk=%s".
>
>
> If by bus you mean the if= parameter, then drives certainly do have
> buses. Just try connecting the scsi drive from the previous paragraph
> to a USB port.
No, I meant drive file=foo.img,bus=3. If that doesn't seem obvious what
it should do to you that's because it isn't at all obvious :-) It ends
up skipping a predefined number of locations in the drive table. This
is pretty broken fundamentally because it assumes controllers always
support a fixed number of devices. Nothing really respects bus_id
though so in practice, I assume it's almost universally broken.
Regards,
Anthony Liguori
next prev parent reply other threads:[~2009-06-15 13:20 UTC|newest]
Thread overview: 457+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1244192535.git.mst@redhat.com>
2009-06-05 10:22 ` [PATCHv3 01/13] qemu: make default_write_config use mask table Michael S. Tsirkin
2009-06-05 10:22 ` Michael S. Tsirkin
2009-06-05 10:22 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 02/13] qemu: capability bits in pci save/restore Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 03/13] qemu: add routines to manage PCI capabilities Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-09 17:11 ` Glauber Costa
2009-06-09 17:11 ` Glauber Costa
2009-06-10 9:54 ` Michael S. Tsirkin
2009-06-10 9:54 ` Michael S. Tsirkin
2009-06-10 9:54 ` Michael S. Tsirkin
2009-06-10 14:55 ` Glauber Costa
2009-06-10 14:55 ` Glauber Costa
2009-06-10 15:01 ` Michael S. Tsirkin
2009-06-10 15:01 ` Michael S. Tsirkin
2009-06-10 15:01 ` Michael S. Tsirkin
2009-06-10 15:24 ` Paul Brook
2009-06-10 15:24 ` Paul Brook
2009-06-10 15:50 ` Michael S. Tsirkin
2009-06-10 15:50 ` Michael S. Tsirkin
2009-06-10 15:50 ` Michael S. Tsirkin
2009-06-10 17:43 ` Jamie Lokier
2009-06-10 17:43 ` Jamie Lokier
2009-06-10 18:22 ` Michael S. Tsirkin
2009-06-10 18:22 ` Michael S. Tsirkin
2009-06-10 19:27 ` Jamie Lokier
2009-06-10 19:27 ` Jamie Lokier
2009-06-12 8:43 ` Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities] Mark McLoughlin
2009-06-12 8:43 ` Mark McLoughlin
2009-06-12 8:43 ` Mark McLoughlin
2009-06-12 13:59 ` Michael S. Tsirkin
2009-06-12 13:59 ` Michael S. Tsirkin
2009-06-12 14:48 ` Mark McLoughlin
2009-06-12 14:48 ` Mark McLoughlin
2009-06-12 14:48 ` Mark McLoughlin
2009-06-12 13:59 ` Michael S. Tsirkin
2009-06-12 14:51 ` Anthony Liguori
2009-06-12 14:51 ` Anthony Liguori
2009-06-12 14:51 ` Anthony Liguori
2009-06-12 15:41 ` Mark McLoughlin
2009-06-12 15:41 ` Mark McLoughlin
2009-06-12 16:11 ` Anthony Liguori
2009-06-12 16:11 ` Anthony Liguori
2009-06-12 16:11 ` Anthony Liguori
2009-06-12 16:48 ` Mark McLoughlin
2009-06-12 16:48 ` Mark McLoughlin
2009-06-12 16:48 ` Mark McLoughlin
2009-06-12 17:00 ` Anthony Liguori
2009-06-12 17:00 ` Anthony Liguori
2009-06-12 17:00 ` Anthony Liguori
2009-06-12 17:31 ` Mark McLoughlin
2009-06-12 17:31 ` Mark McLoughlin
2009-06-12 17:44 ` Blue Swirl
2009-06-12 17:44 ` Blue Swirl
2009-06-12 17:44 ` Blue Swirl
2009-06-12 17:55 ` Mark McLoughlin
2009-06-12 17:55 ` Mark McLoughlin
2009-06-12 17:55 ` Mark McLoughlin
2009-06-16 18:38 ` Jamie Lokier
2009-06-16 18:38 ` Jamie Lokier
2009-06-16 18:38 ` Jamie Lokier
2009-06-12 17:31 ` Mark McLoughlin
2009-06-14 9:50 ` Michael S. Tsirkin
2009-06-14 9:50 ` Michael S. Tsirkin
2009-06-15 9:08 ` Mark McLoughlin
2009-06-15 9:08 ` Mark McLoughlin
2009-06-15 9:08 ` Mark McLoughlin
2009-06-15 9:27 ` Avi Kivity
2009-06-15 9:27 ` Avi Kivity
2009-06-15 10:32 ` Michael S. Tsirkin
2009-06-15 10:32 ` Michael S. Tsirkin
2009-06-15 10:44 ` Gleb Natapov
2009-06-15 10:44 ` Gleb Natapov
2009-06-15 10:44 ` Gleb Natapov
2009-06-15 10:46 ` Michael S. Tsirkin
2009-06-15 10:46 ` Michael S. Tsirkin
2009-06-15 10:52 ` Gleb Natapov
2009-06-15 10:52 ` Gleb Natapov
2009-06-15 11:07 ` Michael S. Tsirkin
2009-06-15 11:07 ` Michael S. Tsirkin
2009-06-15 11:07 ` Michael S. Tsirkin
2009-06-15 11:14 ` Gleb Natapov
2009-06-15 11:14 ` Gleb Natapov
2009-06-15 11:14 ` Gleb Natapov
2009-06-15 11:34 ` Michael S. Tsirkin
2009-06-15 11:34 ` Michael S. Tsirkin
2009-06-15 11:34 ` Michael S. Tsirkin
2009-06-15 10:52 ` Gleb Natapov
2009-06-15 10:46 ` Michael S. Tsirkin
2009-06-15 11:27 ` Avi Kivity
2009-06-15 11:27 ` Avi Kivity
2009-06-15 11:27 ` Avi Kivity
2009-06-15 11:48 ` Michael S. Tsirkin
2009-06-15 11:48 ` Michael S. Tsirkin
2009-06-15 11:48 ` Michael S. Tsirkin
2009-06-15 11:56 ` Avi Kivity
2009-06-15 11:56 ` Avi Kivity
2009-06-15 11:56 ` Avi Kivity
2009-06-15 12:41 ` Michael S. Tsirkin
2009-06-15 12:41 ` Michael S. Tsirkin
2009-06-15 12:50 ` Avi Kivity
2009-06-15 12:50 ` Avi Kivity
2009-06-15 12:50 ` Avi Kivity
2009-06-15 12:52 ` Anthony Liguori
2009-06-15 12:52 ` Anthony Liguori
2009-06-15 12:52 ` Anthony Liguori
2009-06-15 13:09 ` Avi Kivity
2009-06-15 13:09 ` Avi Kivity
2009-06-15 13:09 ` Avi Kivity
2009-06-15 13:23 ` Anthony Liguori
2009-06-15 13:23 ` Anthony Liguori
2009-06-15 13:42 ` Avi Kivity
2009-06-15 13:42 ` Avi Kivity
2009-06-15 13:42 ` Avi Kivity
2009-06-15 13:51 ` Anthony Liguori
2009-06-15 13:51 ` Anthony Liguori
2009-06-15 14:06 ` Dor Laor
2009-06-15 14:06 ` Dor Laor
2009-06-15 14:06 ` Dor Laor
2009-06-15 14:24 ` Anthony Liguori
2009-06-15 14:24 ` Anthony Liguori
2009-06-15 14:37 ` Michael S. Tsirkin
2009-06-15 14:37 ` Michael S. Tsirkin
2009-06-15 15:03 ` Anthony Liguori
2009-06-15 15:03 ` Anthony Liguori
2009-06-15 15:03 ` Anthony Liguori
2009-06-15 15:08 ` Daniel P. Berrange
2009-06-15 15:08 ` Daniel P. Berrange
2009-06-15 15:08 ` Daniel P. Berrange
2009-06-15 15:12 ` Dor Laor
2009-06-15 15:12 ` Dor Laor
2009-06-15 15:12 ` Dor Laor
2009-06-15 15:15 ` Avi Kivity
2009-06-15 15:15 ` Avi Kivity
2009-06-15 15:15 ` Avi Kivity
2009-06-16 18:32 ` Jamie Lokier
2009-06-16 18:32 ` Jamie Lokier
2009-06-17 6:38 ` Avi Kivity
2009-06-17 6:38 ` Avi Kivity
2009-06-17 11:51 ` Jamie Lokier
2009-06-17 11:51 ` Jamie Lokier
2009-06-17 11:51 ` Jamie Lokier
2009-06-17 6:38 ` Avi Kivity
2009-06-16 18:32 ` Jamie Lokier
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 17:13 ` Avi Kivity
2009-06-15 17:13 ` Avi Kivity
2009-06-15 14:37 ` Michael S. Tsirkin
2009-06-15 15:05 ` Avi Kivity
2009-06-15 15:05 ` Avi Kivity
2009-06-15 15:05 ` Avi Kivity
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 17:09 ` Avi Kivity
2009-06-15 17:09 ` Avi Kivity
2009-06-15 18:12 ` Anthony Liguori
2009-06-15 18:12 ` Anthony Liguori
2009-06-15 18:21 ` Avi Kivity
2009-06-15 18:21 ` Avi Kivity
2009-06-15 18:24 ` Anthony Liguori
2009-06-15 18:24 ` Anthony Liguori
2009-06-15 18:24 ` Anthony Liguori
2009-06-15 18:44 ` Blue Swirl
2009-06-15 18:44 ` Blue Swirl
2009-06-16 8:56 ` Avi Kivity
2009-06-16 8:56 ` Avi Kivity
2009-06-16 8:56 ` Avi Kivity
2009-06-15 18:21 ` Avi Kivity
2009-06-16 12:14 ` Mark McLoughlin
2009-06-16 12:14 ` Mark McLoughlin
2009-06-16 12:14 ` Mark McLoughlin
2009-06-16 12:28 ` Avi Kivity
2009-06-16 12:28 ` Avi Kivity
2009-06-16 12:39 ` Mark McLoughlin
2009-06-16 12:39 ` Mark McLoughlin
2009-06-16 12:39 ` Mark McLoughlin
2009-06-16 12:51 ` Avi Kivity
2009-06-16 12:51 ` Avi Kivity
2009-06-16 12:51 ` Avi Kivity
2009-06-16 18:44 ` Jamie Lokier
2009-06-16 18:44 ` Jamie Lokier
2009-06-17 8:33 ` Mark McLoughlin
2009-06-17 8:33 ` Mark McLoughlin
2009-06-17 9:03 ` Avi Kivity
2009-06-17 9:03 ` Avi Kivity
2009-06-17 9:03 ` Avi Kivity
2009-06-17 9:18 ` Mark McLoughlin
2009-06-17 9:18 ` Mark McLoughlin
2009-06-17 9:26 ` Avi Kivity
2009-06-17 9:26 ` Avi Kivity
2009-06-17 11:58 ` Jamie Lokier
2009-06-17 11:58 ` Jamie Lokier
2009-06-17 11:58 ` Jamie Lokier
2009-06-17 9:26 ` Avi Kivity
2009-06-17 9:18 ` Mark McLoughlin
2009-06-17 8:33 ` Mark McLoughlin
2009-06-16 18:44 ` Jamie Lokier
2009-06-24 8:04 ` Dietmar Maurer
2009-06-16 12:28 ` Avi Kivity
2009-07-07 11:08 ` [Qemu-devel] [PATCH 0/3] Change virtio blk/console PCI classes and introduce compat machine type [was Re: Configuration vs. compat hints] Mark McLoughlin
2009-07-07 11:09 ` [Qemu-devel] [PATCH 1/3] Change default PCI class of virtio-blk to PCI_CLASS_STORAGE_SCSI Mark McLoughlin
2009-07-07 11:09 ` [Qemu-devel] [PATCH 2/3] Change default PCI class of virtio-console to PCI_CLASS_SERIAL_OTHER Mark McLoughlin
2009-07-07 11:10 ` [Qemu-devel] [PATCH 3/3] Add a pc-0-10 machine type for compatibility with 0.10.x Mark McLoughlin
2009-07-07 12:01 ` Avi Kivity
2009-07-08 10:46 ` Mark McLoughlin
2009-07-08 10:48 ` [Qemu-devel] [PATCH 3/3 v2] " Mark McLoughlin
2009-07-08 13:00 ` Gerd Hoffmann
2009-07-08 13:44 ` Anthony Liguori
2009-07-08 14:09 ` Gerd Hoffmann
2009-07-08 15:08 ` Mark McLoughlin
2009-07-08 19:07 ` Gerd Hoffmann
2009-07-08 21:45 ` Anthony Liguori
2009-07-09 7:56 ` Gerd Hoffmann
2009-07-09 8:39 ` Mark McLoughlin
2009-07-09 8:50 ` Avi Kivity
2009-07-09 8:57 ` Mark McLoughlin
2009-07-09 9:04 ` Avi Kivity
2009-07-09 9:05 ` Gerd Hoffmann
2009-07-09 10:01 ` Gerd Hoffmann
2009-07-09 13:31 ` Mark McLoughlin
2009-07-09 13:47 ` Gerd Hoffmann
2009-07-09 13:35 ` Anthony Liguori
2009-07-09 13:55 ` Gerd Hoffmann
2009-07-09 16:09 ` Paul Brook
2009-07-09 11:51 ` Avi Kivity
2009-07-09 13:29 ` Anthony Liguori
2009-07-09 13:59 ` Avi Kivity
2009-07-09 15:00 ` Anthony Liguori
2009-07-21 14:21 ` [Qemu-devel] [PATCH 0/4] Add pc-0.11 machine type and make pc an alias to it Mark McLoughlin
2009-07-21 14:21 ` [Qemu-devel] [PATCH 1/4] Remove the pc-0-10 machine type Mark McLoughlin
2009-07-21 14:49 ` Mark McLoughlin
2009-07-22 2:14 ` Anthony Liguori
2009-07-22 8:56 ` Gerd Hoffmann
2009-07-22 9:05 ` Mark McLoughlin
2009-07-22 9:02 ` Mark McLoughlin
2009-07-22 9:02 ` [Qemu-devel] [PATCH 1/2] Add machine type aliases Mark McLoughlin
2009-07-22 9:02 ` [Qemu-devel] [PATCH 2/2] Add a pc-0.11 machine type and make the pc type an alias Mark McLoughlin
2009-07-23 13:34 ` Mark McLoughlin
2009-07-21 14:21 ` [Qemu-devel] [PATCH 2/4] Remove the virtio-{blk, console}-pci-0-10 device types Mark McLoughlin
2009-07-21 14:21 ` [Qemu-devel] [PATCH 3/4] Add machine type aliases Mark McLoughlin
2009-07-21 14:21 ` [Qemu-devel] [PATCH 4/4] Add a pc-0.11 machine type and make the pc type an alias Mark McLoughlin
2009-07-09 8:00 ` [Qemu-devel] [PATCH 3/3 v2] Add a pc-0-10 machine type for compatibility with 0.10.x Avi Kivity
2009-07-15 11:27 ` [Qemu-devel] [PATCH 2/3] Change default PCI class of virtio-console to PCI_CLASS_SERIAL_OTHER Amit Shah
2009-06-15 18:12 ` Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities] Anthony Liguori
2009-06-15 16:27 ` Mark McLoughlin
2009-06-15 13:51 ` Anthony Liguori
2009-06-15 13:23 ` Anthony Liguori
2009-06-15 12:41 ` Michael S. Tsirkin
2009-06-15 10:32 ` Michael S. Tsirkin
2009-06-15 11:35 ` Configuration vs. compat hints Markus Armbruster
2009-06-15 11:35 ` [Qemu-devel] " Markus Armbruster
2009-06-15 11:43 ` Avi Kivity
2009-06-15 11:43 ` Avi Kivity
2009-06-15 11:43 ` [Qemu-devel] " Avi Kivity
2009-06-15 11:59 ` Stefano Stabellini
2009-06-15 11:59 ` Stefano Stabellini
2009-06-15 11:59 ` [Qemu-devel] " Stefano Stabellini
2009-06-15 12:41 ` Markus Armbruster
2009-06-15 12:41 ` Markus Armbruster
2009-06-15 12:50 ` Anthony Liguori
2009-06-15 12:50 ` Anthony Liguori
2009-06-15 12:50 ` Anthony Liguori
2009-06-15 14:23 ` Javier Guerra
2009-06-15 14:23 ` [Qemu-devel] " Javier Guerra
2009-06-15 14:23 ` Javier Guerra
2009-06-15 11:35 ` Markus Armbruster
2009-06-15 12:41 ` Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities] Anthony Liguori
2009-06-15 12:41 ` Anthony Liguori
2009-06-15 12:55 ` Avi Kivity
2009-06-15 12:55 ` Avi Kivity
2009-06-15 12:55 ` Avi Kivity
2009-06-15 13:04 ` Configuration vs. compat hints Markus Armbruster
2009-06-15 13:04 ` Markus Armbruster
2009-06-15 13:04 ` [Qemu-devel] " Markus Armbruster
2009-06-15 12:41 ` Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities] Anthony Liguori
2009-06-15 9:27 ` Avi Kivity
2009-06-15 9:43 ` Avi Kivity
2009-06-15 9:43 ` Avi Kivity
2009-06-15 9:43 ` Avi Kivity
2009-06-15 10:29 ` Michael S. Tsirkin
2009-06-15 10:29 ` Michael S. Tsirkin
2009-06-15 10:29 ` Michael S. Tsirkin
2009-06-15 12:45 ` Anthony Liguori
2009-06-15 12:45 ` Anthony Liguori
2009-06-15 13:03 ` Avi Kivity
2009-06-15 13:03 ` Avi Kivity
2009-06-15 13:20 ` Anthony Liguori [this message]
2009-06-15 13:20 ` Anthony Liguori
2009-06-15 13:35 ` Avi Kivity
2009-06-15 13:35 ` Avi Kivity
2009-06-15 13:35 ` Avi Kivity
2009-06-15 13:45 ` Anthony Liguori
2009-06-15 13:45 ` Anthony Liguori
2009-06-15 13:54 ` Avi Kivity
2009-06-15 13:54 ` Avi Kivity
2009-06-15 15:07 ` Anthony Liguori
2009-06-15 15:07 ` Anthony Liguori
2009-06-15 15:07 ` Anthony Liguori
2009-06-15 15:11 ` Avi Kivity
2009-06-15 15:11 ` Avi Kivity
2009-06-15 15:20 ` Anthony Liguori
2009-06-15 15:20 ` Anthony Liguori
2009-06-15 15:20 ` Anthony Liguori
2009-06-15 15:26 ` Avi Kivity
2009-06-15 15:26 ` Avi Kivity
2009-06-15 15:26 ` Avi Kivity
2009-06-15 15:11 ` Avi Kivity
2009-06-15 13:54 ` Avi Kivity
2009-06-15 13:45 ` Anthony Liguori
2009-06-15 13:20 ` Anthony Liguori
2009-06-15 13:03 ` Avi Kivity
2009-06-15 13:17 ` Gerd Hoffmann
2009-06-15 13:17 ` Gerd Hoffmann
2009-06-15 13:17 ` Gerd Hoffmann
2009-06-15 12:45 ` Anthony Liguori
2009-06-14 9:50 ` Michael S. Tsirkin
2009-06-12 15:41 ` Mark McLoughlin
2009-06-14 7:55 ` Avi Kivity
2009-06-14 7:55 ` Avi Kivity
2009-06-14 7:55 ` Avi Kivity
2009-06-12 14:55 ` Anthony Liguori
2009-06-12 14:55 ` Anthony Liguori
2009-06-12 15:53 ` Mark McLoughlin
2009-06-12 15:53 ` Mark McLoughlin
2009-06-12 16:12 ` Anthony Liguori
2009-06-12 16:12 ` Anthony Liguori
2009-06-12 16:12 ` Anthony Liguori
2009-06-12 16:48 ` Mark McLoughlin
2009-06-12 16:48 ` Mark McLoughlin
2009-06-12 16:48 ` Mark McLoughlin
2009-06-14 7:58 ` Avi Kivity
2009-06-14 7:58 ` Avi Kivity
2009-06-14 7:58 ` Avi Kivity
2009-06-15 5:32 ` Configuration vs. compat hints Markus Armbruster
2009-06-15 5:32 ` Markus Armbruster
2009-06-15 5:32 ` [Qemu-devel] " Markus Armbruster
2009-06-15 9:09 ` Configuration vs. compat hints [was Re: [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities] Mark McLoughlin
2009-06-15 9:09 ` Mark McLoughlin
2009-06-15 11:32 ` Avi Kivity
2009-06-15 11:32 ` Avi Kivity
2009-06-15 11:32 ` Avi Kivity
2009-06-15 12:48 ` Anthony Liguori
2009-06-15 12:48 ` Anthony Liguori
2009-06-15 12:48 ` Anthony Liguori
2009-06-15 13:12 ` Avi Kivity
2009-06-15 13:12 ` Avi Kivity
2009-06-15 13:24 ` Anthony Liguori
2009-06-15 13:24 ` Anthony Liguori
2009-06-15 13:43 ` Avi Kivity
2009-06-15 13:43 ` Avi Kivity
2009-06-15 13:43 ` Avi Kivity
2009-06-15 13:24 ` Anthony Liguori
2009-06-15 13:12 ` Avi Kivity
2009-06-15 14:00 ` Mark McLoughlin
2009-06-15 14:00 ` Mark McLoughlin
2009-06-15 14:20 ` Anthony Liguori
2009-06-15 14:20 ` Anthony Liguori
2009-06-15 14:34 ` Michael S. Tsirkin
2009-06-15 14:34 ` Michael S. Tsirkin
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 15:11 ` Anthony Liguori
2009-06-15 14:34 ` Michael S. Tsirkin
2009-06-15 14:20 ` Anthony Liguori
2009-06-15 14:00 ` Mark McLoughlin
2009-06-15 9:09 ` Mark McLoughlin
2009-06-14 9:34 ` Michael S. Tsirkin
2009-06-14 9:34 ` Michael S. Tsirkin
2009-06-14 9:34 ` Michael S. Tsirkin
2009-06-14 9:37 ` Avi Kivity
2009-06-14 9:37 ` Avi Kivity
2009-06-14 9:37 ` Avi Kivity
2009-06-14 9:47 ` Michael S. Tsirkin
2009-06-14 9:47 ` Michael S. Tsirkin
2009-06-15 9:38 ` Avi Kivity
2009-06-15 9:38 ` Avi Kivity
2009-06-15 9:38 ` Avi Kivity
2009-06-14 9:47 ` Michael S. Tsirkin
2009-06-15 9:02 ` Mark McLoughlin
2009-06-15 9:02 ` Mark McLoughlin
2009-06-15 9:02 ` Mark McLoughlin
2009-06-12 15:53 ` Mark McLoughlin
2009-06-12 14:55 ` Anthony Liguori
2009-06-10 19:27 ` [Qemu-devel] [PATCHv3 03/13] qemu: add routines to manage PCI capabilities Jamie Lokier
2009-06-10 18:22 ` Michael S. Tsirkin
2009-06-10 17:43 ` Jamie Lokier
2009-06-10 15:24 ` Paul Brook
2009-06-10 14:55 ` Glauber Costa
2009-06-09 17:11 ` Glauber Costa
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 04/13] qemu: helper routines for pci access Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 05/13] qemu: MSI-X support functions Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-09 17:26 ` Glauber Costa
2009-06-09 17:26 ` Glauber Costa
2009-06-09 17:26 ` Glauber Costa
2009-06-10 9:58 ` Michael S. Tsirkin
2009-06-10 9:58 ` Michael S. Tsirkin
2009-06-10 9:58 ` Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 06/13] qemu: add flag to disable MSI-X by default Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 07/13] qemu: minimal MSI/MSI-X implementation for PC Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-09 17:33 ` Glauber Costa
2009-06-09 17:33 ` Glauber Costa
2009-06-09 17:33 ` Glauber Costa
2009-06-10 9:59 ` Michael S. Tsirkin
2009-06-10 9:59 ` Michael S. Tsirkin
2009-06-10 9:59 ` Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [PATCHv3 08/13] qemu: add support for resizing regions Michael S. Tsirkin
2009-06-05 10:23 ` Michael S. Tsirkin
2009-06-05 10:23 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-09 17:36 ` Glauber Costa
2009-06-09 17:36 ` Glauber Costa
2009-06-10 10:05 ` Michael S. Tsirkin
2009-06-10 10:05 ` Michael S. Tsirkin
2009-06-10 10:05 ` Michael S. Tsirkin
2009-06-10 10:46 ` Michael S. Tsirkin
2009-06-10 10:46 ` Michael S. Tsirkin
2009-06-10 10:46 ` Michael S. Tsirkin
2009-06-09 17:36 ` Glauber Costa
2009-06-05 10:24 ` [PATCHv3 09/13] qemu: virtio support for many interrupt vectors Michael S. Tsirkin
2009-06-05 10:24 ` Michael S. Tsirkin
2009-06-05 10:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:24 ` [PATCHv3 10/13] qemu: MSI-X support in virtio PCI Michael S. Tsirkin
2009-06-05 10:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:24 ` Michael S. Tsirkin
2009-06-05 10:24 ` [PATCHv3 11/13] qemu: request 3 vectors in virtio-net Michael S. Tsirkin
2009-06-05 10:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:24 ` Michael S. Tsirkin
2009-06-05 10:24 ` [PATCHv3 12/13] qemu: virtio save/load bindings Michael S. Tsirkin
2009-06-05 10:24 ` Michael S. Tsirkin
2009-06-05 10:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-09 17:45 ` Glauber Costa
2009-06-09 17:45 ` Glauber Costa
2009-06-09 17:45 ` Glauber Costa
2009-06-10 10:11 ` Michael S. Tsirkin
2009-06-10 10:11 ` Michael S. Tsirkin
2009-06-10 10:11 ` Michael S. Tsirkin
2009-06-10 11:33 ` Michael S. Tsirkin
2009-06-10 11:33 ` Michael S. Tsirkin
2009-06-10 11:33 ` Michael S. Tsirkin
2009-06-05 10:24 ` [PATCHv3 13/13] qemu: add pci_get/set_byte Michael S. Tsirkin
2009-06-05 10:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-06-05 10:24 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A364A9B.9070001@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=blauwirbel@gmail.com \
--cc=borntraeger@de.ibm.com \
--cc=cotte@de.ibm.com \
--cc=glommer@redhat.com \
--cc=jamie@shareable.org \
--cc=kvm@vger.kernel.org \
--cc=markmc@redhat.com \
--cc=mst@redhat.com \
--cc=paul@codesourcery.com \
--cc=qemu-devel@nongnu.org \
--cc=rusty@rustcorp.com.au \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.