All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vaibhav Hiremath <hvaibhav@ti.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	"Benoît Cousson" <b-cousson@ti.com>
Subject: Re: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
Date: Wed, 12 Dec 2012 15:52:06 +0530	[thread overview]
Message-ID: <50C85ACE.4040906@ti.com> (raw)
In-Reply-To: <20121209200327.3196.27686.stgit@dusk.lan>



On 12/10/2012 1:33 AM, Paul Walmsley wrote:
> There's no need to determine the current power state for powerdomains
> that must be on while the kernel is running.  We mark these
> powerdomains with a new flag, PWRDM_ACTIVE_WITH_KERNEL.  Any
> powerdomain marked with that flag is reported as being in the ON power
> state while the kernel is running.
> 
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Benoît Cousson <b-cousson@ti.com>
> ---
>  arch/arm/mach-omap2/powerdomain.c           |    9 ++++++---
>  arch/arm/mach-omap2/powerdomain.h           |    4 ++++
>  arch/arm/mach-omap2/powerdomains2xxx_data.c |    2 ++
>  arch/arm/mach-omap2/powerdomains33xx_data.c |    3 ++-
>  arch/arm/mach-omap2/powerdomains3xxx_data.c |    9 ++++++---
>  arch/arm/mach-omap2/powerdomains44xx_data.c |    5 ++++-
>  6 files changed, 24 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index f5e2727..a4bb0bb 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -462,7 +462,8 @@ static int _pwrdm_read_fpwrst(struct powerdomain *pwrdm)
>  	int pwrst, logic_pwrst, ret;
>  	u8 fpwrst;
>  
> -	if (!_pwrdm_pwrst_can_change(pwrdm))
> +	if (!_pwrdm_pwrst_can_change(pwrdm) ||
> +	    pwrdm->flags & PWRDM_ACTIVE_WITH_KERNEL)
>  		return PWRDM_FUNC_PWRST_ON;
>  
>  	pwrst = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
> @@ -1104,12 +1105,14 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
>  
>  int pwrdm_state_switch_nolock(struct powerdomain *pwrdm)
>  {
> -	int ret;
> +	int ret = 0;
>  
>  	if (!pwrdm || !arch_pwrdm)
>  		return -EINVAL;
>  
> -	ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
> +	if (!(pwrdm->flags & PWRDM_ACTIVE_WITH_KERNEL))
> +		ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
> +
>  	if (!ret)
>  		_pwrdm_state_switch(pwrdm);
>  
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index f4a189a..10941fd 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -78,10 +78,14 @@ enum pwrdm_func_state {
>   *
>   * PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state
>   * to a lower sleep state without waking up the powerdomain
> + *
> + * PWRDM_ACTIVE_WITH_KERNEL - this powerdomain's current power state is
> + * guaranteed to be ON whenever the kernel is running
>   */
>  #define PWRDM_HAS_HDWR_SAR		BIT(0)
>  #define PWRDM_HAS_MPU_QUIRK		BIT(1)
>  #define PWRDM_HAS_LOWPOWERSTATECHANGE	BIT(2)
> +#define PWRDM_ACTIVE_WITH_KERNEL	BIT(3)
>  
>  /*
>   * Powerdomain internal flags (struct powerdomain._flags)
> diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
> index 578eef8..112927f 100644
> --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
> @@ -54,6 +54,7 @@ static struct powerdomain mpu_24xx_pwrdm = {
>  		[0] = PWRSTS_ON,
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain core_24xx_pwrdm = {
> @@ -73,6 +74,7 @@ static struct powerdomain core_24xx_pwrdm = {
>  		[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  
> diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
> index 869adb8..acb148a 100644
> --- a/arch/arm/mach-omap2/powerdomains33xx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
> @@ -123,7 +123,8 @@ static struct powerdomain mpu_33xx_pwrdm = {
>  	.pwrstst_offs		= AM33XX_PM_MPU_PWRSTST_OFFSET,
>  	.pwrsts			= PWRSTS_OFF_RET_ON,
>  	.pwrsts_logic_ret	= PWRSTS_OFF_RET,
> -	.flags			= PWRDM_HAS_LOWPOWERSTATECHANGE,
> +	.flags			= (PWRDM_HAS_LOWPOWERSTATECHANGE |
> +				   PWRDM_ACTIVE_WITH_KERNEL),

This needs to be applicable for "wkup_pwrdm" as well.

Thanks,
Vaibhav


>  	.banks			= 3,
>  	.logicretstate_mask	= AM33XX_LOGICRETSTATE_MASK,
>  	.mem_on_mask		= {
> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> index f0e14e9ef..ade93d3 100644
> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> @@ -58,7 +58,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
>  	.prcm_offs	  = MPU_MOD,
>  	.pwrsts		  = PWRSTS_OFF_RET_ON,
>  	.pwrsts_logic_ret = PWRSTS_OFF_RET,
> -	.flags		  = PWRDM_HAS_MPU_QUIRK,
> +	.flags		  = (PWRDM_HAS_MPU_QUIRK | PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 1,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_OFF_RET,
> @@ -74,7 +74,7 @@ static struct powerdomain mpu_am35x_pwrdm = {
>  	.prcm_offs	  = MPU_MOD,
>  	.pwrsts		  = PWRSTS_ON,
>  	.pwrsts_logic_ret = PWRSTS_ON,
> -	.flags		  = PWRDM_HAS_MPU_QUIRK,
> +	.flags		  = (PWRDM_HAS_MPU_QUIRK | PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 1,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_ON,
> @@ -110,6 +110,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
>  		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain core_3xxx_es3_1_pwrdm = {
> @@ -121,7 +122,8 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
>  	 * Setting the SAR flag for errata ID i478 which applies
>  	 *  to 3430 <= ES3.1
>  	 */
> -	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
> +	.flags		  = (PWRDM_HAS_HDWR_SAR |  /* for USBTLL only */
> +			     PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 2,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
> @@ -149,6 +151,7 @@ static struct powerdomain core_am35x_pwrdm = {
>  		[1] = PWRSTS_ON, /* MEM2ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain dss_pwrdm = {
> diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
> index 704664c..b64213c 100644
> --- a/arch/arm/mach-omap2/powerdomains44xx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
> @@ -53,7 +53,8 @@ static struct powerdomain core_44xx_pwrdm = {
>  		[3] = PWRSTS_ON,	/* ducati_l2ram */
>  		[4] = PWRSTS_ON,	/* ducati_unicache */
>  	},
> -	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
> +	.flags		  = (PWRDM_HAS_LOWPOWERSTATECHANGE |
> +			     PWRDM_ACTIVE_WITH_KERNEL),
>  };
>  
>  /* gfx_44xx_pwrdm: 3D accelerator power domain */
> @@ -164,6 +165,7 @@ static struct powerdomain cpu0_44xx_pwrdm = {
>  	.pwrsts_mem_on	= {
>  		[0] = PWRSTS_ON,	/* cpu0_l1 */
>  	},
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
> @@ -218,6 +220,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
>  		[1] = PWRSTS_ON,	/* mpu_l2 */
>  		[2] = PWRSTS_ON,	/* mpu_ram */
>  	},
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  /* ivahd_44xx_pwrdm: IVA-HD power domain */
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
Date: Wed, 12 Dec 2012 15:52:06 +0530	[thread overview]
Message-ID: <50C85ACE.4040906@ti.com> (raw)
In-Reply-To: <20121209200327.3196.27686.stgit@dusk.lan>



On 12/10/2012 1:33 AM, Paul Walmsley wrote:
> There's no need to determine the current power state for powerdomains
> that must be on while the kernel is running.  We mark these
> powerdomains with a new flag, PWRDM_ACTIVE_WITH_KERNEL.  Any
> powerdomain marked with that flag is reported as being in the ON power
> state while the kernel is running.
> 
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Beno?t Cousson <b-cousson@ti.com>
> ---
>  arch/arm/mach-omap2/powerdomain.c           |    9 ++++++---
>  arch/arm/mach-omap2/powerdomain.h           |    4 ++++
>  arch/arm/mach-omap2/powerdomains2xxx_data.c |    2 ++
>  arch/arm/mach-omap2/powerdomains33xx_data.c |    3 ++-
>  arch/arm/mach-omap2/powerdomains3xxx_data.c |    9 ++++++---
>  arch/arm/mach-omap2/powerdomains44xx_data.c |    5 ++++-
>  6 files changed, 24 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index f5e2727..a4bb0bb 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -462,7 +462,8 @@ static int _pwrdm_read_fpwrst(struct powerdomain *pwrdm)
>  	int pwrst, logic_pwrst, ret;
>  	u8 fpwrst;
>  
> -	if (!_pwrdm_pwrst_can_change(pwrdm))
> +	if (!_pwrdm_pwrst_can_change(pwrdm) ||
> +	    pwrdm->flags & PWRDM_ACTIVE_WITH_KERNEL)
>  		return PWRDM_FUNC_PWRST_ON;
>  
>  	pwrst = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
> @@ -1104,12 +1105,14 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
>  
>  int pwrdm_state_switch_nolock(struct powerdomain *pwrdm)
>  {
> -	int ret;
> +	int ret = 0;
>  
>  	if (!pwrdm || !arch_pwrdm)
>  		return -EINVAL;
>  
> -	ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
> +	if (!(pwrdm->flags & PWRDM_ACTIVE_WITH_KERNEL))
> +		ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
> +
>  	if (!ret)
>  		_pwrdm_state_switch(pwrdm);
>  
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index f4a189a..10941fd 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -78,10 +78,14 @@ enum pwrdm_func_state {
>   *
>   * PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state
>   * to a lower sleep state without waking up the powerdomain
> + *
> + * PWRDM_ACTIVE_WITH_KERNEL - this powerdomain's current power state is
> + * guaranteed to be ON whenever the kernel is running
>   */
>  #define PWRDM_HAS_HDWR_SAR		BIT(0)
>  #define PWRDM_HAS_MPU_QUIRK		BIT(1)
>  #define PWRDM_HAS_LOWPOWERSTATECHANGE	BIT(2)
> +#define PWRDM_ACTIVE_WITH_KERNEL	BIT(3)
>  
>  /*
>   * Powerdomain internal flags (struct powerdomain._flags)
> diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
> index 578eef8..112927f 100644
> --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
> @@ -54,6 +54,7 @@ static struct powerdomain mpu_24xx_pwrdm = {
>  		[0] = PWRSTS_ON,
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain core_24xx_pwrdm = {
> @@ -73,6 +74,7 @@ static struct powerdomain core_24xx_pwrdm = {
>  		[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  
> diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
> index 869adb8..acb148a 100644
> --- a/arch/arm/mach-omap2/powerdomains33xx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
> @@ -123,7 +123,8 @@ static struct powerdomain mpu_33xx_pwrdm = {
>  	.pwrstst_offs		= AM33XX_PM_MPU_PWRSTST_OFFSET,
>  	.pwrsts			= PWRSTS_OFF_RET_ON,
>  	.pwrsts_logic_ret	= PWRSTS_OFF_RET,
> -	.flags			= PWRDM_HAS_LOWPOWERSTATECHANGE,
> +	.flags			= (PWRDM_HAS_LOWPOWERSTATECHANGE |
> +				   PWRDM_ACTIVE_WITH_KERNEL),

This needs to be applicable for "wkup_pwrdm" as well.

Thanks,
Vaibhav


>  	.banks			= 3,
>  	.logicretstate_mask	= AM33XX_LOGICRETSTATE_MASK,
>  	.mem_on_mask		= {
> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> index f0e14e9ef..ade93d3 100644
> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> @@ -58,7 +58,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
>  	.prcm_offs	  = MPU_MOD,
>  	.pwrsts		  = PWRSTS_OFF_RET_ON,
>  	.pwrsts_logic_ret = PWRSTS_OFF_RET,
> -	.flags		  = PWRDM_HAS_MPU_QUIRK,
> +	.flags		  = (PWRDM_HAS_MPU_QUIRK | PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 1,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_OFF_RET,
> @@ -74,7 +74,7 @@ static struct powerdomain mpu_am35x_pwrdm = {
>  	.prcm_offs	  = MPU_MOD,
>  	.pwrsts		  = PWRSTS_ON,
>  	.pwrsts_logic_ret = PWRSTS_ON,
> -	.flags		  = PWRDM_HAS_MPU_QUIRK,
> +	.flags		  = (PWRDM_HAS_MPU_QUIRK | PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 1,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_ON,
> @@ -110,6 +110,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
>  		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain core_3xxx_es3_1_pwrdm = {
> @@ -121,7 +122,8 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
>  	 * Setting the SAR flag for errata ID i478 which applies
>  	 *  to 3430 <= ES3.1
>  	 */
> -	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
> +	.flags		  = (PWRDM_HAS_HDWR_SAR |  /* for USBTLL only */
> +			     PWRDM_ACTIVE_WITH_KERNEL),
>  	.banks		  = 2,
>  	.pwrsts_mem_ret	  = {
>  		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
> @@ -149,6 +151,7 @@ static struct powerdomain core_am35x_pwrdm = {
>  		[1] = PWRSTS_ON, /* MEM2ONSTATE */
>  	},
>  	.voltdm		  = { .name = "core" },
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  static struct powerdomain dss_pwrdm = {
> diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
> index 704664c..b64213c 100644
> --- a/arch/arm/mach-omap2/powerdomains44xx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
> @@ -53,7 +53,8 @@ static struct powerdomain core_44xx_pwrdm = {
>  		[3] = PWRSTS_ON,	/* ducati_l2ram */
>  		[4] = PWRSTS_ON,	/* ducati_unicache */
>  	},
> -	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
> +	.flags		  = (PWRDM_HAS_LOWPOWERSTATECHANGE |
> +			     PWRDM_ACTIVE_WITH_KERNEL),
>  };
>  
>  /* gfx_44xx_pwrdm: 3D accelerator power domain */
> @@ -164,6 +165,7 @@ static struct powerdomain cpu0_44xx_pwrdm = {
>  	.pwrsts_mem_on	= {
>  		[0] = PWRSTS_ON,	/* cpu0_l1 */
>  	},
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
> @@ -218,6 +220,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
>  		[1] = PWRSTS_ON,	/* mpu_l2 */
>  		[2] = PWRSTS_ON,	/* mpu_ram */
>  	},
> +	.flags		  = PWRDM_ACTIVE_WITH_KERNEL,
>  };
>  
>  /* ivahd_44xx_pwrdm: IVA-HD power domain */
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

  reply	other threads:[~2012-12-12 10:22 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-09 20:02 [PATCH 00/12] ARM: OMAP2+: powerdomain updates after the functional power state conversion Paul Walmsley
2012-12-09 20:02 ` Paul Walmsley
2012-12-09 20:02 ` [PATCH 01/12] ARM: OMAP2+: powerdomain: consolidate arch_pwrdm check code Paul Walmsley
2012-12-09 20:02   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 02/12] ARM: OMAP2+: PM/powerdomain: move the power state time tracking into the powerdomain code Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 03/12] ARM: OMAP2+: powerdomain: split pwrdm_state_switch() Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 04/12] ARM: OMAP2+: PM: clean up some debugfs functions Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 05/12] ARM: OMAP2+: powerdomain: remove some redundant checks; add some notes Paul Walmsley
2012-12-09 20:03 ` [PATCH 06/12] ARM: OMAP2+: CM: use the cached copy of the clockdomain's hwsup state Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 07/12] ARM: OMAP2+: powerdomain: cache the powerdomain next power state Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 08/12] ARM: OMAP2+: powerdomain: cache the powerdomain's previous " Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-12 10:22   ` Vaibhav Hiremath [this message]
2012-12-12 10:22     ` Vaibhav Hiremath
2012-12-19 21:09   ` Jon Hunter
2012-12-19 21:09     ` Jon Hunter
2012-12-20 17:22     ` Paul Walmsley
2012-12-20 17:22       ` Paul Walmsley
2012-12-21  6:33       ` Santosh Shilimkar
2012-12-21  6:33         ` Santosh Shilimkar
2012-12-26  6:21   ` Bedia, Vaibhav
2012-12-26  6:21     ` Bedia, Vaibhav
2012-12-26  6:31     ` Bedia, Vaibhav
2012-12-26  6:31       ` Bedia, Vaibhav
2012-12-26 20:49     ` Paul Walmsley
2012-12-26 20:49       ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 10/12] ARM: OMAP2+: powerdomain: skip previous-power-state read if next_pwrst is ON Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 11/12] ARM: OMAP2xxx: powerdomain: add previous power state tracking Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2012-12-09 20:03 ` [PATCH 12/12] ARM: OMAP2xxx: PM: add pwrdm_(pre|post)_transition() calls to the 2xxx PM code Paul Walmsley
2012-12-09 20:03   ` Paul Walmsley
2013-01-04 14:26 ` [PATCH 00/12] ARM: OMAP2+: powerdomain updates after the functional power state conversion Tero Kristo
2013-01-04 14:26   ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50C85ACE.4040906@ti.com \
    --to=hvaibhav@ti.com \
    --cc=b-cousson@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.