From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Phillip Susi <psusi@ubuntu.com>, todd.e.brandt@linux.intel.com
Cc: tj@kernel.org, JBottomley@parallels.com,
linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: Re: [PATCH 2/6] libata: avoid waking disk to check power
Date: Mon, 11 Nov 2013 17:05:49 +0400 [thread overview]
Message-ID: <5280D62D.6070909@cogentembedded.com> (raw)
In-Reply-To: <04ad6fca8105259a952c5d7c9ec5c5c0c52e6266.1384030893.git.psusi@ubuntu.com>
Hello.
On 10-11-2013 1:03, Phillip Susi wrote:
> When a disk is in SLEEP mode it can not respond to commands,
> including the CHECK POWER command. Instead of waking up the
> sleeping disk, fake the reply to the CHECK POWER command to
> indicate the disk is in standby mode. This prevents udisks
> from waking up sleeping disks when it polls to see if they
> are awake or not before trying to read their smart status.
> ---
> drivers/ata/libata-core.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 83b1a9f..686c441 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -5084,6 +5084,14 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
>
> /* if device is sleeping, schedule reset and abort the link */
> if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
> + if (unlikely(qc->tf.command == ATA_CMD_CHK_POWER))
> + {
Keep { on the same line as *if* please.
WBR, Sergei
next prev parent reply other threads:[~2013-11-11 13:05 UTC|newest]
Thread overview: 165+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 19:33 [PATCH/RESEND v2 0/2] SATA disk resume time optimization Todd E Brandt
2013-11-07 1:53 ` Phillip Susi
2013-11-07 1:57 ` [PATCH 1/3] sd: don't bother spinning up disks on resume Phillip Susi
2013-11-07 18:21 ` Douglas Gilbert
2013-11-07 21:16 ` Phillip Susi
2013-11-16 18:20 ` James Bottomley
2013-11-17 3:50 ` Phillip Susi
2013-11-17 6:43 ` James Bottomley
2013-11-17 16:15 ` Phillip Susi
2013-11-17 23:54 ` Douglas Gilbert
2013-11-18 1:06 ` Phillip Susi
2013-11-18 15:54 ` Phillip Susi
2013-11-20 14:23 ` Mark Lord
2013-11-20 14:48 ` Phillip Susi
2013-11-28 1:39 ` Phillip Susi
2013-11-18 0:09 ` James Bottomley
2013-11-18 1:11 ` Phillip Susi
2013-11-16 5:23 ` Mark Lord
2013-11-16 14:52 ` Phillip Susi
2013-11-07 1:57 ` [PATCH 2/3] libata: resume in the background Phillip Susi
2013-11-07 1:57 ` [PATCH 3/3] libata: don't start disks on resume Phillip Susi
2013-11-09 1:20 ` [PATCH/RESEND v2 0/2] SATA disk resume time optimization Todd E Brandt
2013-11-09 20:59 ` Phillip Susi
2013-11-09 21:03 ` [PATCH 0/6] Let sleeping disks lie Phillip Susi
2013-12-16 23:30 ` Phillip Susi
2013-12-16 23:30 ` [PATCH 1/6] libata: use sleep instead of standby command Phillip Susi
2013-12-16 23:30 ` [PATCH 2/6] libata: avoid waking disk for several commands Phillip Susi
2013-12-16 23:30 ` [PATCH 3/6] libata: resume in the background Phillip Susi
2014-01-10 22:26 ` Dan Williams
2014-01-11 2:25 ` Phillip Susi
2014-01-11 3:11 ` Dan Williams
2013-12-16 23:30 ` [PATCH 4/6] libata: don't start disks on resume Phillip Susi
2013-12-16 23:30 ` [PATCH 5/6] sd: don't start disks on system resume Phillip Susi
2013-12-17 6:43 ` James Bottomley
2013-12-17 15:01 ` Phillip Susi
2013-12-17 17:48 ` James Bottomley
2013-12-17 18:30 ` Phillip Susi
2013-12-16 23:30 ` [PATCH 6/6] libata: return power status in REQUEST SENSE command Phillip Susi
2013-12-17 18:02 ` Sergei Shtylyov
2013-12-17 18:35 ` Phillip Susi
2014-01-06 2:14 ` REQ_PM vs REQ_TYPE_PM_RESUME Phillip Susi
2014-01-06 7:36 ` Sujit Reddy Thumma
2014-01-06 9:15 ` Aaron Lu
2014-01-06 14:40 ` Phillip Susi
2014-01-06 15:38 ` Alan Stern
2014-01-07 2:44 ` Phillip Susi
2014-01-07 15:20 ` Alan Stern
2014-01-07 15:40 ` Phillip Susi
2014-01-07 15:56 ` Alan Stern
2014-01-09 18:29 ` Douglas Gilbert
2014-01-09 19:20 ` Phillip Susi
2014-01-10 5:23 ` Douglas Gilbert
2014-01-10 14:29 ` Phillip Susi
2014-01-07 7:49 ` Aaron Lu
2014-01-07 14:50 ` Phillip Susi
2014-01-08 1:03 ` Aaron Lu
2014-01-08 1:16 ` Phillip Susi
2014-01-08 1:32 ` Aaron Lu
2014-01-08 1:53 ` Phillip Susi
2014-01-08 2:11 ` Aaron Lu
2014-01-08 2:19 ` Phillip Susi
2014-01-08 2:36 ` Aaron Lu
2014-01-08 5:24 ` Phillip Susi
2014-01-08 7:00 ` Aaron Lu
2014-01-08 19:30 ` Phillip Susi
2014-01-07 15:25 ` Alan Stern
2014-01-07 15:43 ` Phillip Susi
2014-01-07 16:08 ` Alan Stern
2014-01-07 16:37 ` Phillip Susi
2014-01-07 18:05 ` Alan Stern
2014-01-07 18:43 ` Phillip Susi
2014-01-07 19:18 ` Alan Stern
2014-01-07 23:47 ` Phillip Susi
2014-01-08 17:46 ` Alan Stern
2014-01-08 18:31 ` Alan Stern
2014-01-08 20:44 ` Allow runtime suspend during system resume Alan Stern
2014-01-08 21:17 ` Phillip Susi
2014-01-08 21:34 ` Alan Stern
2014-01-09 10:14 ` Ulf Hansson
2014-01-09 15:41 ` Alan Stern
2014-01-08 22:55 ` Rafael J. Wysocki
2014-01-08 23:24 ` Alan Stern
2014-01-09 0:05 ` Rafael J. Wysocki
2014-01-09 15:32 ` Alan Stern
2014-01-09 15:50 ` Phillip Susi
2014-01-09 16:08 ` Alan Stern
2014-01-09 16:30 ` Phillip Susi
2014-01-09 17:04 ` Alan Stern
2014-01-10 1:25 ` Rafael J. Wysocki
2014-01-10 1:55 ` Phillip Susi
2014-01-10 13:35 ` Rafael J. Wysocki
2014-01-10 14:46 ` Phillip Susi
2014-01-10 15:25 ` Alan Stern
2014-01-10 23:02 ` Rafael J. Wysocki
2014-01-11 2:08 ` Phillip Susi
2014-01-11 22:50 ` Alan Stern
2014-01-12 1:50 ` Phillip Susi
2014-01-11 22:34 ` Alan Stern
2014-01-08 20:20 ` REQ_PM vs REQ_TYPE_PM_RESUME Phillip Susi
2014-01-08 21:21 ` Alan Stern
2014-01-08 21:50 ` Phillip Susi
2014-01-09 1:29 ` Aaron Lu
2014-01-09 12:17 ` Rafael J. Wysocki
2014-01-09 13:18 ` Rafael J. Wysocki
2014-01-09 15:40 ` Alan Stern
2014-01-09 15:53 ` Phillip Susi
2014-01-09 16:14 ` Alan Stern
2014-01-09 16:34 ` Phillip Susi
2014-01-09 17:06 ` Alan Stern
2014-01-16 16:59 ` Disk spin-up optimization during system resume Alan Stern
2014-01-16 18:04 ` Todd E Brandt
2014-01-16 18:33 ` Phillip Susi
2014-01-16 20:05 ` Alan Stern
2014-01-16 22:04 ` Todd E Brandt
2014-01-17 14:57 ` Alan Stern
2014-01-17 19:31 ` Dan Williams
2014-01-17 20:15 ` Alan Stern
2014-01-17 20:24 ` Tejun Heo
2014-01-17 20:55 ` Phillip Susi
2014-01-18 14:04 ` Tejun Heo
2014-01-18 1:36 ` Todd E Brandt
2014-01-18 1:41 ` Alan Stern
2014-01-18 2:15 ` Dan Williams
2014-01-18 2:33 ` Alan Stern
2014-01-18 3:24 ` Phillip Susi
2014-01-18 13:59 ` Tejun Heo
2014-01-17 20:49 ` Phillip Susi
2014-01-17 22:17 ` Dan Williams
2014-01-18 3:18 ` Phillip Susi
2014-01-18 4:09 ` Dan Williams
2014-01-18 14:08 ` Alan Stern
2014-01-21 10:12 ` Dan Williams
2014-01-21 14:37 ` Phillip Susi
2014-01-21 16:03 ` Alan Stern
2014-01-21 16:18 ` Phillip Susi
2014-01-21 16:49 ` Alan Stern
2014-01-21 15:44 ` Alan Stern
2014-01-21 16:18 ` Dan Williams
2014-01-21 16:55 ` Dan Williams
2014-01-20 12:38 ` CrashPlan Pro
2014-01-20 14:30 ` Phillip Susi
2014-01-18 1:24 ` Todd E Brandt
2014-01-18 3:20 ` Phillip Susi
2014-01-16 18:39 ` Phillip Susi
2014-01-16 20:08 ` Alan Stern
2014-01-17 10:16 ` Oliver Neukum
2014-01-17 10:21 ` Tejun Heo
2014-01-17 18:18 ` Alan Stern
2014-01-17 18:39 ` James Bottomley
2014-01-17 19:07 ` Tejun Heo
2013-11-09 21:03 ` [PATCH 1/6] libata: use sleep instead of standby command Phillip Susi
2013-11-09 21:03 ` [PATCH 2/6] libata: avoid waking disk to check power Phillip Susi
2013-11-11 13:05 ` Sergei Shtylyov [this message]
2013-11-09 21:03 ` [PATCH 3/6] sd: don't bother spinning up disks on resume Phillip Susi
2013-11-11 13:08 ` Sergei Shtylyov
2013-11-11 14:28 ` Phillip Susi
2013-11-09 21:03 ` [PATCH 4/6] libata: resume in the background Phillip Susi
2013-11-11 13:10 ` Sergei Shtylyov
2013-11-09 21:03 ` [PATCH 5/6] libata: don't start disks on resume Phillip Susi
2013-11-09 21:03 ` [PATCH 6/6] libata: fake some more commands when drive is sleeping Phillip Susi
2013-11-11 16:59 ` [PATCH/RESEND v2 0/2] SATA disk resume time optimization Todd E Brandt
2013-11-11 17:08 ` Phillip Susi
2013-12-17 12:15 ` Tejun Heo
2013-12-17 14:24 ` Phillip Susi
2013-11-27 16:18 ` Phillip Susi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5280D62D.6070909@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=JBottomley@parallels.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=psusi@ubuntu.com \
--cc=tj@kernel.org \
--cc=todd.e.brandt@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.