From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
f.fainelli@gmail.com, khilman@baylibre.com, carlo@caione.org,
andrew@lunn.ch
Cc: netdev@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
Date: Tue, 1 Nov 2016 12:48:06 +0300 [thread overview]
Message-ID: <52cb99f1-93ef-ea53-63c1-a661c2790538@cogentembedded.com> (raw)
In-Reply-To: <1477932987-27871-4-git-send-email-narmstrong@baylibre.com>
Hello.
On 10/31/2016 7:56 PM, Neil Armstrong wrote:
> Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 45 ++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index d1bf381..71670c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -47,6 +47,24 @@
>
> / {
> compatible = "amlogic,meson-gxl";
> +
> +
No need for these empty lines.
> +};
> +
> +ðmac {
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4>;
> +
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +
> + mdio0: mdio0 {
Should be "mdio0: mdio {" in oprder to comply woth the DT spec.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + };
> };
>
> &aobus {
[...]
MBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: Neil Armstrong
<narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org,
andrew-g2DYL2Zd6BY@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
Date: Tue, 1 Nov 2016 12:48:06 +0300 [thread overview]
Message-ID: <52cb99f1-93ef-ea53-63c1-a661c2790538@cogentembedded.com> (raw)
In-Reply-To: <1477932987-27871-4-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Hello.
On 10/31/2016 7:56 PM, Neil Armstrong wrote:
> Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs
>
> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 45 ++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index d1bf381..71670c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -47,6 +47,24 @@
>
> / {
> compatible = "amlogic,meson-gxl";
> +
> +
No need for these empty lines.
> +};
> +
> +ðmac {
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4>;
> +
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +
> + mdio0: mdio0 {
Should be "mdio0: mdio {" in oprder to comply woth the DT spec.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + };
> };
>
> &aobus {
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
Date: Tue, 1 Nov 2016 12:48:06 +0300 [thread overview]
Message-ID: <52cb99f1-93ef-ea53-63c1-a661c2790538@cogentembedded.com> (raw)
In-Reply-To: <1477932987-27871-4-git-send-email-narmstrong@baylibre.com>
Hello.
On 10/31/2016 7:56 PM, Neil Armstrong wrote:
> Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 45 ++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index d1bf381..71670c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -47,6 +47,24 @@
>
> / {
> compatible = "amlogic,meson-gxl";
> +
> +
No need for these empty lines.
> +};
> +
> +ðmac {
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4>;
> +
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +
> + mdio0: mdio0 {
Should be "mdio0: mdio {" in oprder to comply woth the DT spec.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + };
> };
>
> &aobus {
[...]
MBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linus-amlogic@lists.infradead.org
Subject: [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
Date: Tue, 1 Nov 2016 12:48:06 +0300 [thread overview]
Message-ID: <52cb99f1-93ef-ea53-63c1-a661c2790538@cogentembedded.com> (raw)
In-Reply-To: <1477932987-27871-4-git-send-email-narmstrong@baylibre.com>
Hello.
On 10/31/2016 7:56 PM, Neil Armstrong wrote:
> Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 45 ++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index d1bf381..71670c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -47,6 +47,24 @@
>
> / {
> compatible = "amlogic,meson-gxl";
> +
> +
No need for these empty lines.
> +};
> +
> +ðmac {
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4>;
> +
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +
> + mdio0: mdio0 {
Should be "mdio0: mdio {" in oprder to comply woth the DT spec.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + };
> };
>
> &aobus {
[...]
MBR, Sergei
next prev parent reply other threads:[~2016-11-01 9:48 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-31 16:56 [RFC PATCH v2 0/5] ARM64: Add Internal PHY support for Meson GXL Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 1/5] net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 18:59 ` Andrew Lunn
2016-10-31 18:59 ` Andrew Lunn
2016-10-31 18:59 ` Andrew Lunn
2016-11-09 18:26 ` Rob Herring
2016-11-09 18:26 ` Rob Herring
2016-11-09 18:26 ` Rob Herring
2016-10-31 16:56 ` [RFC PATCH v2 2/5] net: phy: Add Meson GXL Internal PHY driver Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 19:05 ` Andrew Lunn
2016-10-31 19:05 ` Andrew Lunn
2016-10-31 19:05 ` Andrew Lunn
2016-11-02 10:33 ` Neil Armstrong
2016-11-02 10:33 ` Neil Armstrong
2016-11-02 10:33 ` Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-11-01 9:48 ` Sergei Shtylyov [this message]
2016-11-01 9:48 ` Sergei Shtylyov
2016-11-01 9:48 ` Sergei Shtylyov
2016-11-01 9:48 ` Sergei Shtylyov
2016-10-31 16:56 ` [RFC PATCH v2 4/5] ARM64: dts: meson-gxl-p23x: Enable ethernet Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 5/5] ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-10-31 16:56 ` Neil Armstrong
2016-11-04 10:55 ` [RFC PATCH v2 0/5] ARM64: Add Internal PHY support for Meson GXL Neil Armstrong
2016-11-04 10:55 ` Neil Armstrong
2016-11-04 10:55 ` Neil Armstrong
2016-11-04 10:55 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52cb99f1-93ef-ea53-63c1-a661c2790538@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=andrew@lunn.ch \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.