All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Figa <tomasz.figa@gmail.com>
To: Rahul Sharma <rahul.sharma@samsung.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com, joshi@samsung.com,
	r.sh.open@gmail.com
Subject: Re: [PATCH v4 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi
Date: Wed, 14 May 2014 21:44:55 +0200	[thread overview]
Message-ID: <5373C7B7.5000300@gmail.com> (raw)
In-Reply-To: <1400035562-16832-3-git-send-email-rahul.sharma@samsung.com>

Hi Rahul,

On 14.05.2014 04:45, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
> 
> Replace compatible string for HDMI node in Exynos5420. Since
> latest restructring in Drm hdmi driver, it is agreed to use
> a seperate compatible string for Exynos5420 HDMI IP siince it
> uses APB mapped Phy.
> 
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5420.dtsi |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index a802f74..016992c 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -640,7 +640,7 @@
>  	};
>  
>  	hdmi: hdmi@14530000 {
> -		compatible = "samsung,exynos4212-hdmi";
> +		compatible = "samsung,exynos5420-hdmi";
>  		reg = <0x14530000 0x70000>;
>  		interrupts = <0 95 0>;
>  		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
> 

Acked-by: Tomasz Figa <t.figa@samsung.com>

The compatible string doesn't seem to be documented in linux-next,
though. Are the necessary patches adding it already merged?

Best regards,
Tomasz

WARNING: multiple messages have this Message-ID (diff)
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi
Date: Wed, 14 May 2014 21:44:55 +0200	[thread overview]
Message-ID: <5373C7B7.5000300@gmail.com> (raw)
In-Reply-To: <1400035562-16832-3-git-send-email-rahul.sharma@samsung.com>

Hi Rahul,

On 14.05.2014 04:45, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
> 
> Replace compatible string for HDMI node in Exynos5420. Since
> latest restructring in Drm hdmi driver, it is agreed to use
> a seperate compatible string for Exynos5420 HDMI IP siince it
> uses APB mapped Phy.
> 
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5420.dtsi |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index a802f74..016992c 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -640,7 +640,7 @@
>  	};
>  
>  	hdmi: hdmi at 14530000 {
> -		compatible = "samsung,exynos4212-hdmi";
> +		compatible = "samsung,exynos5420-hdmi";
>  		reg = <0x14530000 0x70000>;
>  		interrupts = <0 95 0>;
>  		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
> 

Acked-by: Tomasz Figa <t.figa@samsung.com>

The compatible string doesn't seem to be documented in linux-next,
though. Are the necessary patches adding it already merged?

Best regards,
Tomasz

  reply	other threads:[~2014-05-14 19:44 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-14  2:45 [PATCH v4 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-14  2:45 ` Rahul Sharma
2014-05-14  2:45 ` [PATCH v4 1/5] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-14  2:45   ` Rahul Sharma
2014-05-14 19:41   ` Tomasz Figa
2014-05-14 19:41     ` Tomasz Figa
2014-05-15  5:22     ` Rahul Sharma
2014-05-15  5:22       ` Rahul Sharma
2014-05-14  2:45 ` [PATCH v4 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-14  2:45   ` Rahul Sharma
2014-05-14 19:44   ` Tomasz Figa [this message]
2014-05-14 19:44     ` Tomasz Figa
2014-05-15  5:25     ` Rahul Sharma
2014-05-15  5:25       ` Rahul Sharma
2014-05-14  2:46 ` [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-14  2:46   ` Rahul Sharma
2014-05-14 19:50   ` Tomasz Figa
2014-05-14 19:50     ` Tomasz Figa
2014-05-15  5:46     ` Rahul Sharma
2014-05-15  5:46       ` Rahul Sharma
2014-05-14  2:46 ` [PATCH v4 4/5] ARM: dts: remove chip specific hdmi hpd pin from board Rahul Sharma
2014-05-14  2:46   ` Rahul Sharma
2014-05-14 18:45   ` Kukjin Kim
2014-05-14 18:45     ` Kukjin Kim
2014-05-14 19:23     ` Rahul Sharma
2014-05-14 19:23       ` Rahul Sharma
2014-05-14 19:51   ` Tomasz Figa
2014-05-14 19:51     ` Tomasz Figa
2014-05-15  5:47     ` Rahul Sharma
2014-05-15  5:47       ` Rahul Sharma
2014-05-14  2:46 ` [PATCH v4 5/5] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-14  2:46   ` Rahul Sharma
2014-05-14 19:56   ` Tomasz Figa
2014-05-14 19:56     ` Tomasz Figa
2014-05-14 19:57     ` Tomasz Figa
2014-05-14 19:57       ` Tomasz Figa
2014-05-15  8:27       ` Rahul Sharma
2014-05-15  8:27         ` Rahul Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5373C7B7.5000300@gmail.com \
    --to=tomasz.figa@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=joshi@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=r.sh.open@gmail.com \
    --cc=rahul.sharma@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.