From: Kukjin Kim <kgene@kernel.org> To: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: Kukjin Kim <kgene@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v4 03/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Date: Wed, 13 May 2015 18:11:18 +0900 [thread overview] Message-ID: <55531536.4040608@kernel.org> (raw) In-Reply-To: <1431351773-2031-4-git-send-email-k.kozlowski.k@gmail.com> On 05/11/15 22:42, Krzysztof Kozlowski wrote: > Usage of labels instead of full paths reduces possible mistakes when > overriding nodes. > In case of this changes, I have no objection. But I can't see the 'codec' node you deleted in this patch? And if possible, can you please put the labels in alphabetically when you create this patch again? so that we could find the labels easily... - Kukjin > Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> > --- > arch/arm/boot/dts/exynos4210-origen.dts | 418 ++++++++++++++++---------------- > 1 file changed, 209 insertions(+), 209 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts > index b81146141402..e0abfc3324d1 100644 > --- a/arch/arm/boot/dts/exynos4210-origen.dts > +++ b/arch/arm/boot/dts/exynos4210-origen.dts > @@ -50,209 +50,6 @@ > }; > }; > > - watchdog@10060000 { > - status = "okay"; > - }; > - > - rtc@10070000 { > - status = "okay"; > - }; > - > - tmu@100C0000 { > - status = "okay"; > - }; > - > - sdhci@12530000 { > - bus-width = <4>; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; > - pinctrl-names = "default"; > - vmmc-supply = <&mmc_reg>; > - status = "okay"; > - }; > - > - sdhci@12510000 { > - bus-width = <4>; > - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; > - pinctrl-names = "default"; > - vmmc-supply = <&mmc_reg>; > - status = "okay"; > - }; > - > - g2d@12800000 { > - status = "okay"; > - }; > - > - codec@13400000 { > - samsung,mfc-r = <0x43000000 0x800000>; > - samsung,mfc-l = <0x51000000 0x800000>; > - status = "okay"; > - }; > - > - serial@13800000 { > - status = "okay"; > - }; > - > - serial@13810000 { > - status = "okay"; > - }; > - > - serial@13820000 { > - status = "okay"; > - }; > - > - serial@13830000 { > - status = "okay"; > - }; > - > - i2c@13860000 { > - status = "okay"; > - samsung,i2c-sda-delay = <100>; > - samsung,i2c-max-bus-freq = <20000>; > - pinctrl-0 = <&i2c0_bus>; > - pinctrl-names = "default"; > - > - max8997_pmic@66 { > - compatible = "maxim,max8997-pmic"; > - reg = <0x66>; > - interrupt-parent = <&gpx0>; > - interrupts = <4 0>, <3 0>; > - > - max8997,pmic-buck1-dvs-voltage = <1350000>; > - max8997,pmic-buck2-dvs-voltage = <1100000>; > - max8997,pmic-buck5-dvs-voltage = <1200000>; > - > - regulators { > - ldo1_reg: LDO1 { > - regulator-name = "VDD_ABB_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - ldo2_reg: LDO2 { > - regulator-name = "VDD_ALIVE_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - }; > - > - ldo3_reg: LDO3 { > - regulator-name = "VMIPI_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - }; > - > - ldo4_reg: LDO4 { > - regulator-name = "VDD_RTC_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo6_reg: LDO6 { > - regulator-name = "VMIPI_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo7_reg: LDO7 { > - regulator-name = "VDD_AUD_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo8_reg: LDO8 { > - regulator-name = "VADC_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - ldo9_reg: LDO9 { > - regulator-name = "DVDD_SWB_2.8V"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-always-on; > - }; > - > - ldo10_reg: LDO10 { > - regulator-name = "VDD_PLL_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - }; > - > - ldo11_reg: LDO11 { > - regulator-name = "VDD_AUD_3V"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - }; > - > - ldo14_reg: LDO14 { > - regulator-name = "AVDD18_SWB_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo17_reg: LDO17 { > - regulator-name = "VDD_SWB_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - }; > - > - ldo21_reg: LDO21 { > - regulator-name = "VDD_MIF_1.2V"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - }; > - > - buck1_reg: BUCK1 { > - /* > - * HACK: The real name is VDD_ARM_1.2V, > - * but exynos-cpufreq does not support > - * DT-based regulator lookup yet. > - */ > - regulator-name = "vdd_arm"; > - regulator-min-microvolt = <950000>; > - regulator-max-microvolt = <1350000>; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - buck2_reg: BUCK2 { > - regulator-name = "VDD_INT_1.1V"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - buck3_reg: BUCK3 { > - regulator-name = "VDD_G3D_1.1V"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1100000>; > - }; > - > - buck5_reg: BUCK5 { > - regulator-name = "VDDQ_M1M2_1.2V"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - }; > - > - buck7_reg: BUCK7 { > - regulator-name = "VDD_LCD_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - }; > - }; > - }; > - > gpio_keys { > compatible = "gpio-keys"; > #address-cells = <1>; > @@ -314,12 +111,6 @@ > }; > }; > > - fimd@11c00000 { > - pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > - pinctrl-names = "default"; > - status = "okay"; > - }; > - > display-timings { > native-mode = <&timing0>; > timing0: timing { > @@ -335,3 +126,212 @@ > }; > }; > }; > + > +&fimd { > + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&g2d { > + status = "okay"; > +}; > + > +&i2c_0 { > + status = "okay"; > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-max-bus-freq = <20000>; > + pinctrl-0 = <&i2c0_bus>; > + pinctrl-names = "default"; > + > + max8997_pmic@66 { > + compatible = "maxim,max8997-pmic"; > + reg = <0x66>; > + interrupt-parent = <&gpx0>; > + interrupts = <4 0>, <3 0>; > + > + max8997,pmic-buck1-dvs-voltage = <1350000>; > + max8997,pmic-buck2-dvs-voltage = <1100000>; > + max8997,pmic-buck5-dvs-voltage = <1200000>; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ABB_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDD_ALIVE_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VMIPI_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD_RTC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VMIPI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD_AUD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VADC_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "DVDD_SWB_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD_PLL_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_AUD_3V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "AVDD18_SWB_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "VDD_SWB_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VDD_MIF_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck1_reg: BUCK1 { > + /* > + * HACK: The real name is VDD_ARM_1.2V, > + * but exynos-cpufreq does not support > + * DT-based regulator lookup yet. > + */ > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VDD_INT_1.1V"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_G3D_1.1V"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDDQ_M1M2_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VDD_LCD_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&mfc { > + samsung,mfc-r = <0x43000000 0x800000>; > + samsung,mfc-l = <0x51000000 0x800000>; > + status = "okay"; > +}; > + > +&sdhci_0 { > + bus-width = <4>; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; > + pinctrl-names = "default"; > + vmmc-supply = <&mmc_reg>; > + status = "okay"; > +}; > + > +&sdhci_2 { > + bus-width = <4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; > + pinctrl-names = "default"; > + vmmc-supply = <&mmc_reg>; > + status = "okay"; > +}; > + > +&serial_0 { > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&serial_2 { > + status = "okay"; > +}; > + > +&serial_3 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&tmu { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +};
WARNING: multiple messages have this Message-ID (diff)
From: kgene@kernel.org (Kukjin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 03/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Date: Wed, 13 May 2015 18:11:18 +0900 [thread overview] Message-ID: <55531536.4040608@kernel.org> (raw) In-Reply-To: <1431351773-2031-4-git-send-email-k.kozlowski.k@gmail.com> On 05/11/15 22:42, Krzysztof Kozlowski wrote: > Usage of labels instead of full paths reduces possible mistakes when > overriding nodes. > In case of this changes, I have no objection. But I can't see the 'codec' node you deleted in this patch? And if possible, can you please put the labels in alphabetically when you create this patch again? so that we could find the labels easily... - Kukjin > Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> > --- > arch/arm/boot/dts/exynos4210-origen.dts | 418 ++++++++++++++++---------------- > 1 file changed, 209 insertions(+), 209 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts > index b81146141402..e0abfc3324d1 100644 > --- a/arch/arm/boot/dts/exynos4210-origen.dts > +++ b/arch/arm/boot/dts/exynos4210-origen.dts > @@ -50,209 +50,6 @@ > }; > }; > > - watchdog at 10060000 { > - status = "okay"; > - }; > - > - rtc at 10070000 { > - status = "okay"; > - }; > - > - tmu at 100C0000 { > - status = "okay"; > - }; > - > - sdhci at 12530000 { > - bus-width = <4>; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; > - pinctrl-names = "default"; > - vmmc-supply = <&mmc_reg>; > - status = "okay"; > - }; > - > - sdhci at 12510000 { > - bus-width = <4>; > - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; > - pinctrl-names = "default"; > - vmmc-supply = <&mmc_reg>; > - status = "okay"; > - }; > - > - g2d at 12800000 { > - status = "okay"; > - }; > - > - codec at 13400000 { > - samsung,mfc-r = <0x43000000 0x800000>; > - samsung,mfc-l = <0x51000000 0x800000>; > - status = "okay"; > - }; > - > - serial at 13800000 { > - status = "okay"; > - }; > - > - serial at 13810000 { > - status = "okay"; > - }; > - > - serial at 13820000 { > - status = "okay"; > - }; > - > - serial at 13830000 { > - status = "okay"; > - }; > - > - i2c at 13860000 { > - status = "okay"; > - samsung,i2c-sda-delay = <100>; > - samsung,i2c-max-bus-freq = <20000>; > - pinctrl-0 = <&i2c0_bus>; > - pinctrl-names = "default"; > - > - max8997_pmic at 66 { > - compatible = "maxim,max8997-pmic"; > - reg = <0x66>; > - interrupt-parent = <&gpx0>; > - interrupts = <4 0>, <3 0>; > - > - max8997,pmic-buck1-dvs-voltage = <1350000>; > - max8997,pmic-buck2-dvs-voltage = <1100000>; > - max8997,pmic-buck5-dvs-voltage = <1200000>; > - > - regulators { > - ldo1_reg: LDO1 { > - regulator-name = "VDD_ABB_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - ldo2_reg: LDO2 { > - regulator-name = "VDD_ALIVE_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - }; > - > - ldo3_reg: LDO3 { > - regulator-name = "VMIPI_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - }; > - > - ldo4_reg: LDO4 { > - regulator-name = "VDD_RTC_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo6_reg: LDO6 { > - regulator-name = "VMIPI_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo7_reg: LDO7 { > - regulator-name = "VDD_AUD_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo8_reg: LDO8 { > - regulator-name = "VADC_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - ldo9_reg: LDO9 { > - regulator-name = "DVDD_SWB_2.8V"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-always-on; > - }; > - > - ldo10_reg: LDO10 { > - regulator-name = "VDD_PLL_1.1V"; > - regulator-min-microvolt = <1100000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - }; > - > - ldo11_reg: LDO11 { > - regulator-name = "VDD_AUD_3V"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - }; > - > - ldo14_reg: LDO14 { > - regulator-name = "AVDD18_SWB_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo17_reg: LDO17 { > - regulator-name = "VDD_SWB_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - }; > - > - ldo21_reg: LDO21 { > - regulator-name = "VDD_MIF_1.2V"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - }; > - > - buck1_reg: BUCK1 { > - /* > - * HACK: The real name is VDD_ARM_1.2V, > - * but exynos-cpufreq does not support > - * DT-based regulator lookup yet. > - */ > - regulator-name = "vdd_arm"; > - regulator-min-microvolt = <950000>; > - regulator-max-microvolt = <1350000>; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - buck2_reg: BUCK2 { > - regulator-name = "VDD_INT_1.1V"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1100000>; > - regulator-always-on; > - regulator-boot-on; > - }; > - > - buck3_reg: BUCK3 { > - regulator-name = "VDD_G3D_1.1V"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1100000>; > - }; > - > - buck5_reg: BUCK5 { > - regulator-name = "VDDQ_M1M2_1.2V"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - }; > - > - buck7_reg: BUCK7 { > - regulator-name = "VDD_LCD_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - }; > - }; > - }; > - > gpio_keys { > compatible = "gpio-keys"; > #address-cells = <1>; > @@ -314,12 +111,6 @@ > }; > }; > > - fimd at 11c00000 { > - pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > - pinctrl-names = "default"; > - status = "okay"; > - }; > - > display-timings { > native-mode = <&timing0>; > timing0: timing { > @@ -335,3 +126,212 @@ > }; > }; > }; > + > +&fimd { > + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&g2d { > + status = "okay"; > +}; > + > +&i2c_0 { > + status = "okay"; > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-max-bus-freq = <20000>; > + pinctrl-0 = <&i2c0_bus>; > + pinctrl-names = "default"; > + > + max8997_pmic at 66 { > + compatible = "maxim,max8997-pmic"; > + reg = <0x66>; > + interrupt-parent = <&gpx0>; > + interrupts = <4 0>, <3 0>; > + > + max8997,pmic-buck1-dvs-voltage = <1350000>; > + max8997,pmic-buck2-dvs-voltage = <1100000>; > + max8997,pmic-buck5-dvs-voltage = <1200000>; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ABB_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDD_ALIVE_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VMIPI_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD_RTC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VMIPI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD_AUD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VADC_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "DVDD_SWB_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD_PLL_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_AUD_3V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "AVDD18_SWB_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "VDD_SWB_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VDD_MIF_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck1_reg: BUCK1 { > + /* > + * HACK: The real name is VDD_ARM_1.2V, > + * but exynos-cpufreq does not support > + * DT-based regulator lookup yet. > + */ > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VDD_INT_1.1V"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_G3D_1.1V"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDDQ_M1M2_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VDD_LCD_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&mfc { > + samsung,mfc-r = <0x43000000 0x800000>; > + samsung,mfc-l = <0x51000000 0x800000>; > + status = "okay"; > +}; > + > +&sdhci_0 { > + bus-width = <4>; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; > + pinctrl-names = "default"; > + vmmc-supply = <&mmc_reg>; > + status = "okay"; > +}; > + > +&sdhci_2 { > + bus-width = <4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; > + pinctrl-names = "default"; > + vmmc-supply = <&mmc_reg>; > + status = "okay"; > +}; > + > +&serial_0 { > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&serial_2 { > + status = "okay"; > +}; > + > +&serial_3 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&tmu { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +};
next prev parent reply other threads:[~2015-05-13 9:11 UTC|newest] Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-05-11 13:42 [PATCH v4 00/13] ARM: dts: exynos4: labels for overriding nodes Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 01/13] ARM: dts: Add labels to Exynos4 nodes Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-13 8:59 ` Kukjin Kim 2015-05-13 8:59 ` Kukjin Kim 2015-05-13 9:42 ` Krzysztof Kozłowski 2015-05-13 9:42 ` Krzysztof Kozłowski 2015-05-13 9:42 ` Krzysztof Kozłowski 2015-05-11 13:42 ` [PATCH v4 02/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-13 9:02 ` [PATCH v4 02/13] ARM: dts: exynos4: Use labels for overriding nodesin Exynos4210 Kukjin Kim 2015-05-13 9:02 ` Kukjin Kim 2015-05-13 9:02 ` Kukjin Kim 2015-05-13 9:51 ` Krzysztof Kozlowski 2015-05-13 9:51 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 03/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-13 9:11 ` Kukjin Kim [this message] 2015-05-13 9:11 ` Kukjin Kim 2015-05-13 9:55 ` Krzysztof Kozlowski 2015-05-13 9:55 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 04/13] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 05/13] ARM: dts: exynos4: Use labels for overriding nodes in Trats Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 06/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4212 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 07/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4x12 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 08/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4412 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 09/13] ARM: dts: exynos4: Use labels for overriding nodes in Odroid Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 23:51 ` Eduardo Valentin 2015-05-11 23:51 ` Eduardo Valentin 2015-05-11 13:42 ` [PATCH v4 10/13] ARM: dts: exynos4: Use labels for overriding nodes in SMDK4412 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 11/13] ARM: dts: exynos4: Use labels for overriding nodes in Trats2 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 12/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4412 Origen Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski 2015-05-11 13:42 ` [PATCH v4 13/13] ARM: dts: exynos4: Use labels for overriding nodes in Tiny4412 Krzysztof Kozlowski 2015-05-11 13:42 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=55531536.4040608@kernel.org \ --to=kgene@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=k.kozlowski.k@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.