All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Tero Kristo <t-kristo@ti.com>
Subject: Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
Date: Thu, 15 Oct 2015 10:08:37 +0300	[thread overview]
Message-ID: <561F50F5.9060909@ti.com> (raw)
In-Reply-To: <20151012205732.GW23801@atomide.com>

Tony,

On 10/12/2015 11:57 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [150914 09:32]:
>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [150914 01:54]:
>>> Hi Tony,
>>>
>>> On 08/24/2015 10:19 AM, Peter Ujfalusi wrote:
>>>> Hi,
>>>>
>>>> this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
>>>> dra72-evm and am57xx-beagle-x15 boards.
>>>> In these board McASP3 is connected to the codec and for the McASP3 we needed to
>>>> have the DMA crossbar in place since the request lines are not mapped by
>>>> default.
>>>
>>> Did you had a chance to look at this series?
>>
>> Looks OK to me, will look at it more once we have the fixes merged.
>>
>> Paul may have comments on the hwmod chage, looks like you forgot
>> to Cc him on it. Can you please resend that one with Paul in Cc?
> 
> Applying all the dts changes into omap-for-v4.3/dt thanks. Paul
> can pick up the hwmod change then after reviewing it.

Thanks for taking the DTS patches, however if Paul agrees with the way I think we can handle the McASP in DRA7xx then the patch which adds the mcasp3 node to dra7.dtsi needs to be replaced by:

>From b6733f9ca96a997fab3d0455783e875dd9ae032b Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Tue, 24 Feb 2015 15:12:59 +0200
Subject: [PATCH v2 03/12] ARM: DTS: dra7: Add McASP3 node

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8fedddc35999..cde0a3cbf262 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1404,6 +1404,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
-- 
2.6.1




-- 
Péter

WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
Date: Thu, 15 Oct 2015 10:08:37 +0300	[thread overview]
Message-ID: <561F50F5.9060909@ti.com> (raw)
In-Reply-To: <20151012205732.GW23801-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Tony,

On 10/12/2015 11:57 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [150914 09:32]:
>> * Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org> [150914 01:54]:
>>> Hi Tony,
>>>
>>> On 08/24/2015 10:19 AM, Peter Ujfalusi wrote:
>>>> Hi,
>>>>
>>>> this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
>>>> dra72-evm and am57xx-beagle-x15 boards.
>>>> In these board McASP3 is connected to the codec and for the McASP3 we needed to
>>>> have the DMA crossbar in place since the request lines are not mapped by
>>>> default.
>>>
>>> Did you had a chance to look at this series?
>>
>> Looks OK to me, will look at it more once we have the fixes merged.
>>
>> Paul may have comments on the hwmod chage, looks like you forgot
>> to Cc him on it. Can you please resend that one with Paul in Cc?
> 
> Applying all the dts changes into omap-for-v4.3/dt thanks. Paul
> can pick up the hwmod change then after reviewing it.

Thanks for taking the DTS patches, however if Paul agrees with the way I think we can handle the McASP in DRA7xx then the patch which adds the mcasp3 node to dra7.dtsi needs to be replaced by:

From b6733f9ca96a997fab3d0455783e875dd9ae032b Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
Date: Tue, 24 Feb 2015 15:12:59 +0200
Subject: [PATCH v2 03/12] ARM: DTS: dra7: Add McASP3 node

Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/dra7.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8fedddc35999..cde0a3cbf262 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1404,6 +1404,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
-- 
2.6.1




-- 
Péter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
Date: Thu, 15 Oct 2015 10:08:37 +0300	[thread overview]
Message-ID: <561F50F5.9060909@ti.com> (raw)
In-Reply-To: <20151012205732.GW23801@atomide.com>

Tony,

On 10/12/2015 11:57 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [150914 09:32]:
>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [150914 01:54]:
>>> Hi Tony,
>>>
>>> On 08/24/2015 10:19 AM, Peter Ujfalusi wrote:
>>>> Hi,
>>>>
>>>> this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
>>>> dra72-evm and am57xx-beagle-x15 boards.
>>>> In these board McASP3 is connected to the codec and for the McASP3 we needed to
>>>> have the DMA crossbar in place since the request lines are not mapped by
>>>> default.
>>>
>>> Did you had a chance to look at this series?
>>
>> Looks OK to me, will look at it more once we have the fixes merged.
>>
>> Paul may have comments on the hwmod chage, looks like you forgot
>> to Cc him on it. Can you please resend that one with Paul in Cc?
> 
> Applying all the dts changes into omap-for-v4.3/dt thanks. Paul
> can pick up the hwmod change then after reviewing it.

Thanks for taking the DTS patches, however if Paul agrees with the way I think we can handle the McASP in DRA7xx then the patch which adds the mcasp3 node to dra7.dtsi needs to be replaced by:

>From b6733f9ca96a997fab3d0455783e875dd9ae032b Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Tue, 24 Feb 2015 15:12:59 +0200
Subject: [PATCH v2 03/12] ARM: DTS: dra7: Add McASP3 node

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8fedddc35999..cde0a3cbf262 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1404,6 +1404,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp at 48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar at 4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
-- 
2.6.1




-- 
P?ter

  reply	other threads:[~2015-10-15  7:09 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-24  7:19 [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support Peter Ujfalusi
2015-08-24  7:19 ` Peter Ujfalusi
2015-08-24  7:19 ` Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 01/11] ARM: OMAP: DRA7: hwmod: Add data for McASP3 Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 02/11] ARM: DTS: dra7: Add McASP3 node Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:19 ` [PATCH 03/11] ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:19   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 04/11] ARM: DTS: dra7-evm: Add fixed regulator to be used by aic3106's DVDD Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 05/11] ARM: DTS: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 06/11] ARM: DTS: dra7-evm: Audio support Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 07/11] ARM: DTS: dra72-evm: Add fixed regulator representing DVDD supply for aic3106 Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 08/11] ARM: DTS: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 09/11] ARM: DTS: dra72-evm: Audio support Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 10/11] ARM: DTS: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20 ` [PATCH 11/11] ARM: DTS: am57xx-beagle-x15: Enable analog audio support Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-08-24  7:20   ` Peter Ujfalusi
2015-09-14  8:50 ` [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support Peter Ujfalusi
2015-09-14  8:50   ` Peter Ujfalusi
2015-09-14  8:50   ` Peter Ujfalusi
2015-09-14 16:28   ` Tony Lindgren
2015-09-14 16:28     ` Tony Lindgren
2015-09-14 16:28     ` Tony Lindgren
2015-10-12 20:57     ` Tony Lindgren
2015-10-12 20:57       ` Tony Lindgren
2015-10-15  7:08       ` Peter Ujfalusi [this message]
2015-10-15  7:08         ` Peter Ujfalusi
2015-10-15  7:08         ` Peter Ujfalusi
2015-10-15 14:09         ` Tony Lindgren
2015-10-15 14:09           ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=561F50F5.9060909@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.