From: Krzysztof Kozlowski <k.kozlowski@samsung.com> To: Chanwoo Choi <cw00.choi@samsung.com>, myungjoo.ham@samsung.com, kgene@kernel.org Cc: kyungmin.park@samsung.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, tjakobi@math.uni-bielefeld.de, linux.amoon@gmail.com, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v2 18/19] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 Date: Thu, 10 Dec 2015 16:02:59 +0900 [thread overview] Message-ID: <566923A3.9050801@samsung.com> (raw) In-Reply-To: <1449634091-1842-19-git-send-email-cw00.choi@samsung.com> On 09.12.2015 13:08, Chanwoo Choi wrote: > This patch expands the voltage range of buck1/3 regulator due to as following: > - MIF (Memory Interface) bus frequency needs the 90000uV ~ 1050000uV V. > - INT (Internal) bus frequency needs 90000uV ~ 1000000uV. 90000->900000 and duplicated "uV V". Maybe just: 900 - 1050 mV 900 - 1000 mV ? > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > For the contents of patch: Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> To: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>, myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, tjakobi-o02PS0xoJP9W0yFyLvAVXMxlOr/tl8fh@public.gmane.org, linux.amoon-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Subject: Re: [PATCH v2 18/19] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 Date: Thu, 10 Dec 2015 16:02:59 +0900 [thread overview] Message-ID: <566923A3.9050801@samsung.com> (raw) In-Reply-To: <1449634091-1842-19-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> On 09.12.2015 13:08, Chanwoo Choi wrote: > This patch expands the voltage range of buck1/3 regulator due to as following: > - MIF (Memory Interface) bus frequency needs the 90000uV ~ 1050000uV V. > - INT (Internal) bus frequency needs 90000uV ~ 1000000uV. 90000->900000 and duplicated "uV V". Maybe just: 900 - 1050 mV 900 - 1000 mV ? > > Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> > --- > arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > For the contents of patch: Reviewed-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-10 7:03 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-09 4:07 [PATCH v2 00/19] PM / devferq: Add generic exynos bus frequency driver and new passive governor Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 01/19] PM / devfreq: exynos: Add generic exynos bus frequency driver Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 02/19] PM / devfreq: exynos: Add documentation for " Chanwoo Choi 2015-12-10 0:39 ` Krzysztof Kozlowski 2015-12-10 0:49 ` Chanwoo Choi 2015-12-10 0:49 ` Chanwoo Choi 2015-12-10 1:25 ` Krzysztof Kozlowski 2015-12-10 1:33 ` Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 03/19] ARM: dts: Add DMC bus node for Exynos3250 Chanwoo Choi 2015-12-10 0:44 ` Krzysztof Kozlowski 2015-12-10 1:09 ` Chanwoo Choi 2015-12-10 1:20 ` Krzysztof Kozlowski 2015-12-10 2:00 ` Chanwoo Choi 2015-12-10 2:04 ` Krzysztof Kozlowski 2015-12-10 2:17 ` Chanwoo Choi 2015-12-10 2:21 ` Krzysztof Kozlowski 2015-12-09 4:07 ` [PATCH v2 04/19] ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk Chanwoo Choi 2015-12-10 0:53 ` Krzysztof Kozlowski 2015-12-10 0:56 ` Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 05/19] PM / devfreq: Add new passive governor Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 06/19] PM / devfreq: Add devfreq_get_devfreq_by_phandle() Chanwoo Choi 2015-12-09 4:07 ` [PATCH v2 07/19] PM / devfreq: Show the related information according to governor type Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 08/19] PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor Chanwoo Choi 2015-12-09 4:08 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 09/19] PM / devfreq: exynos: Update documentation for bus devices " Chanwoo Choi 2015-12-10 1:31 ` Krzysztof Kozlowski 2015-12-10 1:36 ` Chanwoo Choi 2015-12-10 14:21 ` Rob Herring 2015-12-10 15:10 ` Chanwoo Choi 2015-12-11 3:24 ` Rob Herring 2015-12-11 3:56 ` Chanwoo Choi 2015-12-11 3:56 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 10/19] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line Chanwoo Choi 2015-12-09 4:08 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 11/19] PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 12/19] ARM: dts: Add bus nodes using VDD_INT for Exynos3250 Chanwoo Choi 2015-12-10 2:09 ` Krzysztof Kozlowski 2015-12-10 2:30 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 Chanwoo Choi 2015-12-10 3:17 ` Krzysztof Kozlowski 2015-12-10 4:21 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT " Chanwoo Choi 2015-12-10 5:57 ` Krzysztof Kozlowski 2015-12-10 6:08 ` Chanwoo Choi 2015-12-10 6:32 ` Krzysztof Kozlowski 2015-12-10 6:43 ` Chanwoo Choi 2015-12-10 6:53 ` Krzysztof Kozlowski 2015-12-10 7:07 ` Chanwoo Choi 2015-12-10 7:12 ` Krzysztof Kozlowski 2015-12-10 7:18 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 15/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 16/19] ARM: dts: Add PPMU node for exynos4412-odroidu3 Chanwoo Choi 2015-12-10 6:44 ` Krzysztof Kozlowski 2015-12-11 2:27 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 17/19] ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato Chanwoo Choi 2015-12-10 6:58 ` Krzysztof Kozlowski 2015-12-10 7:24 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 18/19] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 Chanwoo Choi 2015-12-10 7:02 ` Krzysztof Kozlowski [this message] 2015-12-10 7:02 ` Krzysztof Kozlowski 2015-12-10 7:19 ` Chanwoo Choi 2015-12-09 4:08 ` [PATCH v2 19/19] ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 Chanwoo Choi 2015-12-10 7:08 ` Krzysztof Kozlowski 2015-12-10 7:23 ` Chanwoo Choi 2015-12-09 19:05 ` [PATCH v2 00/19] PM / devferq: Add generic exynos bus frequency driver and new passive governor Anand Moon 2015-12-10 0:12 ` Chanwoo Choi 2015-12-10 4:14 ` Anand Moon 2015-12-10 4:14 ` Anand Moon 2015-12-10 4:20 ` Chanwoo Choi 2015-12-10 0:57 ` Krzysztof Kozlowski 2015-12-10 1:22 ` Krzysztof Kozlowski 2015-12-10 2:16 ` Chanwoo Choi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=566923A3.9050801@samsung.com \ --to=k.kozlowski@samsung.com \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=kgene@kernel.org \ --cc=kyungmin.park@samsung.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux.amoon@gmail.com \ --cc=linux@arm.linux.org.uk \ --cc=mark.rutland@arm.com \ --cc=myungjoo.ham@samsung.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=tjakobi@math.uni-bielefeld.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.