All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: netdev@vger.kernel.org
Cc: nbd@nbd.name, john@phrozen.org, sean.wang@mediatek.com,
	Mark-MC.Lee@mediatek.com, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	Sam.Shih@mediatek.com, linux-mediatek@lists.infradead.org,
	devicetree@vger.kernel.org, robh@kernel.org,
	lorenzo.bianconi@redhat.com
Subject: [PATCH v2 net-next 03/15] net: ethernet: mtk_eth_soc: move tx dma desc configuration in mtk_tx_set_dma_desc
Date: Mon, 16 May 2022 18:06:30 +0200	[thread overview]
Message-ID: <56f87927844502969dd6929e9137c47e54c99c00.1652716741.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1652716741.git.lorenzo@kernel.org>

Move tx dma descriptor configuration in mtk_tx_set_dma_desc routine.
This is a preliminary patch to introduce mt7986 ethernet support since
it relies on a different tx dma descriptor layout.

Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 105 +++++++++++---------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  11 ++
 2 files changed, 67 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 31c5da5d6b72..085c740779de 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -918,18 +918,51 @@ static void setup_tx_buf(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf,
 	}
 }
 
+static void mtk_tx_set_dma_desc(struct net_device *dev, struct mtk_tx_dma *desc,
+				struct mtk_tx_dma_desc_info *info)
+{
+	struct mtk_mac *mac = netdev_priv(dev);
+	u32 data;
+
+	WRITE_ONCE(desc->txd1, info->addr);
+
+	data = TX_DMA_SWC | TX_DMA_PLEN0(info->size);
+	if (info->last)
+		data |= TX_DMA_LS0;
+	WRITE_ONCE(desc->txd3, data);
+
+	data = (mac->id + 1) << TX_DMA_FPORT_SHIFT; /* forward port */
+	if (info->first) {
+		if (info->gso)
+			data |= TX_DMA_TSO;
+		/* tx checksum offload */
+		if (info->csum)
+			data |= TX_DMA_CHKSUM;
+		/* vlan header offload */
+		if (info->vlan)
+			data |= TX_DMA_INS_VLAN | info->vlan_tci;
+	}
+	WRITE_ONCE(desc->txd4, data);
+}
+
 static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 		      int tx_num, struct mtk_tx_ring *ring, bool gso)
 {
+	struct mtk_tx_dma_desc_info txd_info = {
+		.size = skb_headlen(skb),
+		.gso = gso,
+		.csum = skb->ip_summed == CHECKSUM_PARTIAL,
+		.vlan = skb_vlan_tag_present(skb),
+		.vlan_tci = skb_vlan_tag_get(skb),
+		.first = true,
+		.last = !skb_is_nonlinear(skb),
+	};
 	struct mtk_mac *mac = netdev_priv(dev);
 	struct mtk_eth *eth = mac->hw;
 	struct mtk_tx_dma *itxd, *txd;
 	struct mtk_tx_dma *itxd_pdma, *txd_pdma;
 	struct mtk_tx_buf *itx_buf, *tx_buf;
-	dma_addr_t mapped_addr;
-	unsigned int nr_frags;
 	int i, n_desc = 1;
-	u32 txd4 = 0, fport;
 	int k = 0;
 
 	itxd = ring->next_free;
@@ -937,49 +970,32 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 	if (itxd == ring->last_free)
 		return -ENOMEM;
 
-	/* set the forward port */
-	fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT;
-	txd4 |= fport;
-
 	itx_buf = mtk_desc_to_tx_buf(ring, itxd);
 	memset(itx_buf, 0, sizeof(*itx_buf));
 
-	if (gso)
-		txd4 |= TX_DMA_TSO;
-
-	/* TX Checksum offload */
-	if (skb->ip_summed == CHECKSUM_PARTIAL)
-		txd4 |= TX_DMA_CHKSUM;
-
-	/* VLAN header offload */
-	if (skb_vlan_tag_present(skb))
-		txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
-
-	mapped_addr = dma_map_single(eth->dma_dev, skb->data,
-				     skb_headlen(skb), DMA_TO_DEVICE);
-	if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
+	txd_info.addr = dma_map_single(eth->dma_dev, skb->data, txd_info.size,
+				       DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(eth->dma_dev, txd_info.addr)))
 		return -ENOMEM;
 
-	WRITE_ONCE(itxd->txd1, mapped_addr);
+	mtk_tx_set_dma_desc(dev, itxd, &txd_info);
+
 	itx_buf->flags |= MTK_TX_FLAGS_SINGLE0;
 	itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
 			  MTK_TX_FLAGS_FPORT1;
-	setup_tx_buf(eth, itx_buf, itxd_pdma, mapped_addr, skb_headlen(skb),
+	setup_tx_buf(eth, itx_buf, itxd_pdma, txd_info.addr, txd_info.size,
 		     k++);
 
 	/* TX SG offload */
 	txd = itxd;
 	txd_pdma = qdma_to_pdma(ring, txd);
-	nr_frags = skb_shinfo(skb)->nr_frags;
 
-	for (i = 0; i < nr_frags; i++) {
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 		unsigned int offset = 0;
 		int frag_size = skb_frag_size(frag);
 
 		while (frag_size) {
-			bool last_frag = false;
-			unsigned int frag_map_size;
 			bool new_desc = true;
 
 			if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA) ||
@@ -994,23 +1010,17 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 				new_desc = false;
 			}
 
-
-			frag_map_size = min(frag_size, MTK_TX_DMA_BUF_LEN);
-			mapped_addr = skb_frag_dma_map(eth->dma_dev, frag, offset,
-						       frag_map_size,
-						       DMA_TO_DEVICE);
-			if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
+			memset(&txd_info, 0, sizeof(struct mtk_tx_dma_desc_info));
+			txd_info.size = min(frag_size, MTK_TX_DMA_BUF_LEN);
+			txd_info.last = i == skb_shinfo(skb)->nr_frags - 1 &&
+					!(frag_size - txd_info.size);
+			txd_info.addr = skb_frag_dma_map(eth->dma_dev, frag,
+							 offset, txd_info.size,
+							 DMA_TO_DEVICE);
+			if (unlikely(dma_mapping_error(eth->dma_dev, txd_info.addr)))
 				goto err_dma;
 
-			if (i == nr_frags - 1 &&
-			    (frag_size - frag_map_size) == 0)
-				last_frag = true;
-
-			WRITE_ONCE(txd->txd1, mapped_addr);
-			WRITE_ONCE(txd->txd3, (TX_DMA_SWC |
-					       TX_DMA_PLEN0(frag_map_size) |
-					       last_frag * TX_DMA_LS0));
-			WRITE_ONCE(txd->txd4, fport);
+			mtk_tx_set_dma_desc(dev, txd, &txd_info);
 
 			tx_buf = mtk_desc_to_tx_buf(ring, txd);
 			if (new_desc)
@@ -1020,20 +1030,17 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 			tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
 					 MTK_TX_FLAGS_FPORT1;
 
-			setup_tx_buf(eth, tx_buf, txd_pdma, mapped_addr,
-				     frag_map_size, k++);
+			setup_tx_buf(eth, tx_buf, txd_pdma, txd_info.addr,
+				     txd_info.size, k++);
 
-			frag_size -= frag_map_size;
-			offset += frag_map_size;
+			frag_size -= txd_info.size;
+			offset += txd_info.size;
 		}
 	}
 
 	/* store skb to cleanup */
 	itx_buf->skb = skb;
 
-	WRITE_ONCE(itxd->txd4, txd4);
-	WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
-				(!nr_frags * TX_DMA_LS0)));
 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
 		if (k & 0x1)
 			txd_pdma->txd2 |= TX_DMA_LS0;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index b04977fa84f6..5d940315c7ba 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -844,6 +844,17 @@ enum mkt_eth_capabilities {
 		      MTK_MUX_U3_GMAC2_TO_QPHY | \
 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA)
 
+struct mtk_tx_dma_desc_info {
+	dma_addr_t addr;
+	u32 size;
+	u16 vlan_tci;
+	u8 gso:1;
+	u8 csum:1;
+	u8 vlan:1;
+	u8 first:1;
+	u8 last:1;
+};
+
 /* struct mtk_eth_data -	This is the structure holding all differences
  *				among various plaforms
  * @ana_rgc3:                   The offset for register ANA_RGC3 related to
-- 
2.35.3


WARNING: multiple messages have this Message-ID (diff)
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: netdev@vger.kernel.org
Cc: nbd@nbd.name, john@phrozen.org, sean.wang@mediatek.com,
	Mark-MC.Lee@mediatek.com, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	Sam.Shih@mediatek.com, linux-mediatek@lists.infradead.org,
	devicetree@vger.kernel.org, robh@kernel.org,
	lorenzo.bianconi@redhat.com
Subject: [PATCH v2 net-next 03/15] net: ethernet: mtk_eth_soc: move tx dma desc configuration in mtk_tx_set_dma_desc
Date: Mon, 16 May 2022 18:06:30 +0200	[thread overview]
Message-ID: <56f87927844502969dd6929e9137c47e54c99c00.1652716741.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1652716741.git.lorenzo@kernel.org>

Move tx dma descriptor configuration in mtk_tx_set_dma_desc routine.
This is a preliminary patch to introduce mt7986 ethernet support since
it relies on a different tx dma descriptor layout.

Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 105 +++++++++++---------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  11 ++
 2 files changed, 67 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 31c5da5d6b72..085c740779de 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -918,18 +918,51 @@ static void setup_tx_buf(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf,
 	}
 }
 
+static void mtk_tx_set_dma_desc(struct net_device *dev, struct mtk_tx_dma *desc,
+				struct mtk_tx_dma_desc_info *info)
+{
+	struct mtk_mac *mac = netdev_priv(dev);
+	u32 data;
+
+	WRITE_ONCE(desc->txd1, info->addr);
+
+	data = TX_DMA_SWC | TX_DMA_PLEN0(info->size);
+	if (info->last)
+		data |= TX_DMA_LS0;
+	WRITE_ONCE(desc->txd3, data);
+
+	data = (mac->id + 1) << TX_DMA_FPORT_SHIFT; /* forward port */
+	if (info->first) {
+		if (info->gso)
+			data |= TX_DMA_TSO;
+		/* tx checksum offload */
+		if (info->csum)
+			data |= TX_DMA_CHKSUM;
+		/* vlan header offload */
+		if (info->vlan)
+			data |= TX_DMA_INS_VLAN | info->vlan_tci;
+	}
+	WRITE_ONCE(desc->txd4, data);
+}
+
 static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 		      int tx_num, struct mtk_tx_ring *ring, bool gso)
 {
+	struct mtk_tx_dma_desc_info txd_info = {
+		.size = skb_headlen(skb),
+		.gso = gso,
+		.csum = skb->ip_summed == CHECKSUM_PARTIAL,
+		.vlan = skb_vlan_tag_present(skb),
+		.vlan_tci = skb_vlan_tag_get(skb),
+		.first = true,
+		.last = !skb_is_nonlinear(skb),
+	};
 	struct mtk_mac *mac = netdev_priv(dev);
 	struct mtk_eth *eth = mac->hw;
 	struct mtk_tx_dma *itxd, *txd;
 	struct mtk_tx_dma *itxd_pdma, *txd_pdma;
 	struct mtk_tx_buf *itx_buf, *tx_buf;
-	dma_addr_t mapped_addr;
-	unsigned int nr_frags;
 	int i, n_desc = 1;
-	u32 txd4 = 0, fport;
 	int k = 0;
 
 	itxd = ring->next_free;
@@ -937,49 +970,32 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 	if (itxd == ring->last_free)
 		return -ENOMEM;
 
-	/* set the forward port */
-	fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT;
-	txd4 |= fport;
-
 	itx_buf = mtk_desc_to_tx_buf(ring, itxd);
 	memset(itx_buf, 0, sizeof(*itx_buf));
 
-	if (gso)
-		txd4 |= TX_DMA_TSO;
-
-	/* TX Checksum offload */
-	if (skb->ip_summed == CHECKSUM_PARTIAL)
-		txd4 |= TX_DMA_CHKSUM;
-
-	/* VLAN header offload */
-	if (skb_vlan_tag_present(skb))
-		txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
-
-	mapped_addr = dma_map_single(eth->dma_dev, skb->data,
-				     skb_headlen(skb), DMA_TO_DEVICE);
-	if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
+	txd_info.addr = dma_map_single(eth->dma_dev, skb->data, txd_info.size,
+				       DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(eth->dma_dev, txd_info.addr)))
 		return -ENOMEM;
 
-	WRITE_ONCE(itxd->txd1, mapped_addr);
+	mtk_tx_set_dma_desc(dev, itxd, &txd_info);
+
 	itx_buf->flags |= MTK_TX_FLAGS_SINGLE0;
 	itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
 			  MTK_TX_FLAGS_FPORT1;
-	setup_tx_buf(eth, itx_buf, itxd_pdma, mapped_addr, skb_headlen(skb),
+	setup_tx_buf(eth, itx_buf, itxd_pdma, txd_info.addr, txd_info.size,
 		     k++);
 
 	/* TX SG offload */
 	txd = itxd;
 	txd_pdma = qdma_to_pdma(ring, txd);
-	nr_frags = skb_shinfo(skb)->nr_frags;
 
-	for (i = 0; i < nr_frags; i++) {
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 		unsigned int offset = 0;
 		int frag_size = skb_frag_size(frag);
 
 		while (frag_size) {
-			bool last_frag = false;
-			unsigned int frag_map_size;
 			bool new_desc = true;
 
 			if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA) ||
@@ -994,23 +1010,17 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 				new_desc = false;
 			}
 
-
-			frag_map_size = min(frag_size, MTK_TX_DMA_BUF_LEN);
-			mapped_addr = skb_frag_dma_map(eth->dma_dev, frag, offset,
-						       frag_map_size,
-						       DMA_TO_DEVICE);
-			if (unlikely(dma_mapping_error(eth->dma_dev, mapped_addr)))
+			memset(&txd_info, 0, sizeof(struct mtk_tx_dma_desc_info));
+			txd_info.size = min(frag_size, MTK_TX_DMA_BUF_LEN);
+			txd_info.last = i == skb_shinfo(skb)->nr_frags - 1 &&
+					!(frag_size - txd_info.size);
+			txd_info.addr = skb_frag_dma_map(eth->dma_dev, frag,
+							 offset, txd_info.size,
+							 DMA_TO_DEVICE);
+			if (unlikely(dma_mapping_error(eth->dma_dev, txd_info.addr)))
 				goto err_dma;
 
-			if (i == nr_frags - 1 &&
-			    (frag_size - frag_map_size) == 0)
-				last_frag = true;
-
-			WRITE_ONCE(txd->txd1, mapped_addr);
-			WRITE_ONCE(txd->txd3, (TX_DMA_SWC |
-					       TX_DMA_PLEN0(frag_map_size) |
-					       last_frag * TX_DMA_LS0));
-			WRITE_ONCE(txd->txd4, fport);
+			mtk_tx_set_dma_desc(dev, txd, &txd_info);
 
 			tx_buf = mtk_desc_to_tx_buf(ring, txd);
 			if (new_desc)
@@ -1020,20 +1030,17 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 			tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
 					 MTK_TX_FLAGS_FPORT1;
 
-			setup_tx_buf(eth, tx_buf, txd_pdma, mapped_addr,
-				     frag_map_size, k++);
+			setup_tx_buf(eth, tx_buf, txd_pdma, txd_info.addr,
+				     txd_info.size, k++);
 
-			frag_size -= frag_map_size;
-			offset += frag_map_size;
+			frag_size -= txd_info.size;
+			offset += txd_info.size;
 		}
 	}
 
 	/* store skb to cleanup */
 	itx_buf->skb = skb;
 
-	WRITE_ONCE(itxd->txd4, txd4);
-	WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
-				(!nr_frags * TX_DMA_LS0)));
 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
 		if (k & 0x1)
 			txd_pdma->txd2 |= TX_DMA_LS0;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index b04977fa84f6..5d940315c7ba 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -844,6 +844,17 @@ enum mkt_eth_capabilities {
 		      MTK_MUX_U3_GMAC2_TO_QPHY | \
 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA)
 
+struct mtk_tx_dma_desc_info {
+	dma_addr_t addr;
+	u32 size;
+	u16 vlan_tci;
+	u8 gso:1;
+	u8 csum:1;
+	u8 vlan:1;
+	u8 first:1;
+	u8 last:1;
+};
+
 /* struct mtk_eth_data -	This is the structure holding all differences
  *				among various plaforms
  * @ana_rgc3:                   The offset for register ANA_RGC3 related to
-- 
2.35.3


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  parent reply	other threads:[~2022-05-16 16:08 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 16:06 [PATCH v2 net-next 00/15] introduce mt7986 ethernet support Lorenzo Bianconi
2022-05-16 16:06 ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 01/15] arm64: dts: mediatek: mt7986: introduce ethernet nodes Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 02/15] dt-bindings: net: mediatek,net: add mt7986-eth binding Lorenzo Bianconi
2022-05-16 16:06   ` [PATCH v2 net-next 02/15] dt-bindings: net: mediatek, net: " Lorenzo Bianconi
2022-05-17 14:36   ` [PATCH v2 net-next 02/15] dt-bindings: net: mediatek,net: " Rob Herring
2022-05-17 14:36     ` Rob Herring
2022-05-16 16:06 ` Lorenzo Bianconi [this message]
2022-05-16 16:06   ` [PATCH v2 net-next 03/15] net: ethernet: mtk_eth_soc: move tx dma desc configuration in mtk_tx_set_dma_desc Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 04/15] net: ethernet: mtk_eth_soc: add txd_size to mtk_soc_data Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-18  1:33   ` Jakub Kicinski
2022-05-18  1:33     ` Jakub Kicinski
2022-05-18  8:29     ` Lorenzo Bianconi
2022-05-18  8:29       ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 05/15] net: ethernet: mtk_eth_soc: rely on txd_size in mtk_tx_alloc/mtk_tx_clean Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-18  1:35   ` Jakub Kicinski
2022-05-18  1:35     ` Jakub Kicinski
2022-05-18  8:32     ` Lorenzo Bianconi
2022-05-18  8:32       ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 06/15] net: ethernet: mtk_eth_soc: rely on txd_size in mtk_desc_to_tx_buf Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 07/15] net: ethernet: mtk_eth_soc: rely on txd_size in txd_to_idx Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 08/15] net: ethernet: mtk_eth_soc: add rxd_size to mtk_soc_data Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 09/15] net: ethernet: mtk_eth_soc: rely on txd_size field in mtk_poll_tx/mtk_poll_rx Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 10/15] net: ethernet: mtk_eth_soc: rely on rxd_size field in mtk_rx_alloc/mtk_rx_clean Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-18  1:39   ` Jakub Kicinski
2022-05-18  1:39     ` Jakub Kicinski
2022-05-18  8:30     ` Lorenzo Bianconi
2022-05-18  8:30       ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 11/15] net: ethernet: mtk_eth_soc: introduce device register map Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-18  1:41   ` Jakub Kicinski
2022-05-18  1:41     ` Jakub Kicinski
2022-05-18  9:48     ` Lorenzo Bianconi
2022-05-18  9:48       ` Lorenzo Bianconi
2022-05-18 15:44       ` Jakub Kicinski
2022-05-18 15:44         ` Jakub Kicinski
2022-05-19  7:51         ` Lorenzo Bianconi
2022-05-19  7:51           ` Lorenzo Bianconi
2022-05-19 16:12           ` Jakub Kicinski
2022-05-19 16:12             ` Jakub Kicinski
2022-05-20 18:11             ` Lorenzo Bianconi
2022-05-20 18:11               ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 12/15] net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-18  1:44   ` Jakub Kicinski
2022-05-18  1:44     ` Jakub Kicinski
2022-05-18  9:53     ` Lorenzo Bianconi
2022-05-18  9:53       ` Lorenzo Bianconi
2022-05-18 15:47       ` Jakub Kicinski
2022-05-18 15:47         ` Jakub Kicinski
2022-05-18 15:50         ` Felix Fietkau
2022-05-18 15:50           ` Felix Fietkau
2022-05-18 16:08           ` Jakub Kicinski
2022-05-18 16:08             ` Jakub Kicinski
2022-05-16 16:06 ` [PATCH v2 net-next 13/15] net: ethernet: mtk_eth_soc: convert ring dma pointer to void Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 14/15] net: ethernet: mtk_eth_soc: convert scratch_ring " Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi
2022-05-16 16:06 ` [PATCH v2 net-next 15/15] net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset Lorenzo Bianconi
2022-05-16 16:06   ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56f87927844502969dd6929e9137c47e54c99c00.1652716741.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=Mark-MC.Lee@mediatek.com \
    --cc=Sam.Shih@mediatek.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=john@phrozen.org \
    --cc=kuba@kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=nbd@nbd.name \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.