From: "Shaikh, Azhar" <azhar.shaikh@intel.com>
To: "jarkko.sakkinen@linux.intel.com"
<jarkko.sakkinen@linux.intel.com>,
"jgunthorpe@obsidianresearch.com"
<jgunthorpe@obsidianresearch.com>,
"peterhuewe@gmx.de" <peterhuewe@gmx.de>
Cc: "linux-security-module@vger.kernel.org"
<linux-security-module@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"tpmdd-devel@lists.sourceforge.net"
<tpmdd-devel@lists.sourceforge.net>
Subject: RE: [PATCH v4 1/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
Date: Wed, 22 Nov 2017 19:57:32 +0000 [thread overview]
Message-ID: <5FFFAD06ADE1CA4381B3F0F7C6AF582896F1F2@ORSMSX109.amr.corp.intel.com> (raw)
In-Reply-To: <1511303964-56294-2-git-send-email-azhar.shaikh@intel.com>
I found an issue with this patch.
In tpm_transmit() function after clk_enable is called with false, the assumption was whenever the next TPM transaction happens, the clock will be stopped in tpm_platform_end_xfer(). But in cases where after tpm_transmit is completed and there is no TPM transaction until next TPM command is being sent, the clocks will be running till then.
Can we write a dummy byte after clk_enable is set to false? Is this possible/correct way?
Or else as Jason suggested earlier, will get rid of tpm_platform_begin_xfer() and tpm_platform_end_xfer() and have those implemented in the clk_enable() function and have a high level action of enabling and disabling clocks.
Regards,
Azhar Shaikh
>-----Original Message-----
>From: Shaikh, Azhar
>Sent: Tuesday, November 21, 2017 2:39 PM
>To: jarkko.sakkinen@linux.intel.com; jgunthorpe@obsidianresearch.com;
>peterhuewe@gmx.de
>Cc: linux-security-module@vger.kernel.org; linux-kernel@vger.kernel.org;
>tpmdd-devel@lists.sourceforge.net; Shaikh, Azhar <azhar.shaikh@intel.com>
>Subject: [PATCH v4 1/2] tpm: Keep CLKRUN enabled throughout the duration
>of transmit_cmd()
>
>Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
>systems") disabled CLKRUN protocol during TPM transactions and re-enabled
>once the transaction is completed. But there were still some corner cases
>observed where, reading of TPM header failed for savestate command while
>going to suspend, which resulted in suspend failure.
>To fix this issue keep the CLKRUN protocol disabled for the entire duration of a
>single TPM command and not disabling and re-enabling again for every TPM
>transaction. For the other TPM accesses outside the flow of TPM command
>processing, disable and re-enable CLKRUN protocol for every TPM access.
>
>Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
>systems")
>
>Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
>Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
>---
> drivers/char/tpm/tpm-interface.c | 6 ++++++
> drivers/char/tpm/tpm_tis.c | 44 ++++++++++++++++++++++++----------------
> drivers/char/tpm/tpm_tis_core.c | 21 +++++++++++++++++++
>drivers/char/tpm/tpm_tis_core.h | 1 +
> include/linux/tpm.h | 1 +
> 5 files changed, 55 insertions(+), 18 deletions(-)
>
>diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-
>interface.c
>index 1d6729be4cd6..4661a810eab7 100644
>--- a/drivers/char/tpm/tpm-interface.c
>+++ b/drivers/char/tpm/tpm-interface.c
>@@ -413,6 +413,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct
>tpm_space *space,
> if (chip->dev.parent)
> pm_runtime_get_sync(chip->dev.parent);
>
>+ if (chip->ops->clk_enable != NULL)
>+ chip->ops->clk_enable(chip, true);
>+
> /* Store the decision as chip->locality will be changed. */
> need_locality = chip->locality == -1;
>
>@@ -489,6 +492,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct
>tpm_space *space,
> chip->locality = -1;
> }
> out_no_locality:
>+ if (chip->ops->clk_enable != NULL)
>+ chip->ops->clk_enable(chip, false);
>+
> if (chip->dev.parent)
> pm_runtime_put_sync(chip->dev.parent);
>
>diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index
>e2d1055fb814..76a7b64195c8 100644
>--- a/drivers/char/tpm/tpm_tis.c
>+++ b/drivers/char/tpm/tpm_tis.c
>@@ -46,6 +46,7 @@ struct tpm_info {
> struct tpm_tis_tcg_phy {
> struct tpm_tis_data priv;
> void __iomem *iobase;
>+ bool begin_xfer_done;
> };
>
> static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data
>*data) @@ -148,12 +149,15 @@ static inline bool is_bsw(void)
>
> /**
> * tpm_platform_begin_xfer() - clear LPC CLKRUN_EN i.e. clocks will be
>running
>+ * @data: struct tpm_tis_data instance
> */
>-static void tpm_platform_begin_xfer(void)
>+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
> {
> u32 clkrun_val;
>+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- if (!is_bsw())
>+ if (!is_bsw() || ((data->flags & TPM_TIS_CLK_ENABLE) &&
>+ phy->begin_xfer_done))
> return;
>
> clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET); @@
>-168,16 +172,21 @@ static void tpm_platform_begin_xfer(void)
> */
> outb(0xCC, 0x80);
>
>+ if (!(data->flags & TPM_TIS_CLK_ENABLE))
>+ phy->begin_xfer_done = false;
>+ else
>+ phy->begin_xfer_done = true;
> }
>
> /**
> * tpm_platform_end_xfer() - set LPC CLKRUN_EN i.e. clocks can be turned off
>+ * @data: struct tpm_tis_data instance
> */
>-static void tpm_platform_end_xfer(void)
>+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
> {
> u32 clkrun_val;
>
>- if (!is_bsw())
>+ if (!is_bsw() || (data->flags & TPM_TIS_CLK_ENABLE))
> return;
>
> clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET); @@
>-193,17 +202,16 @@ static void tpm_platform_end_xfer(void)
> outb(0xCC, 0x80);
>
> }
>+
> #else
> static inline bool is_bsw(void)
> {
> return false;
> }
>-
>-static void tpm_platform_begin_xfer(void)
>+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
> {
> }
>-
>-static void tpm_platform_end_xfer(void)
>+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
> {
> }
> #endif
>@@ -213,12 +221,12 @@ static int tpm_tcg_read_bytes(struct tpm_tis_data
>*data, u32 addr, u16 len, {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> while (len--)
> *result++ = ioread8(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -228,12 +236,12 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data
>*data, u32 addr, u16 len, {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> while (len--)
> iowrite8(*value++, phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -242,11 +250,11 @@ static int tpm_tcg_read16(struct tpm_tis_data
>*data, u32 addr, u16 *result) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> *result = ioread16(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -255,11 +263,11 @@ static int tpm_tcg_read32(struct tpm_tis_data
>*data, u32 addr, u32 *result) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> *result = ioread32(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -268,11 +276,11 @@ static int tpm_tcg_write32(struct tpm_tis_data
>*data, u32 addr, u32 value) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> iowrite32(value, phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>diff --git a/drivers/char/tpm/tpm_tis_core.c
>b/drivers/char/tpm/tpm_tis_core.c index fdde971bc810..64f5b46f5bf2
>100644
>--- a/drivers/char/tpm/tpm_tis_core.c
>+++ b/drivers/char/tpm/tpm_tis_core.c
>@@ -661,6 +661,26 @@ void tpm_tis_remove(struct tpm_chip *chip) }
>EXPORT_SYMBOL_GPL(tpm_tis_remove);
>
>+/**
>+ * tpm_tis_clkrun_enable() - Keep clkrun protocol disabled for entire
>duration
>+ * of a single TPM command
>+ * @chip: TPM chip to use
>+ * @value: 1 - Disable CLKRUN protocol, so that clocks are free running
>+ * 0 - Enable CLKRUN protocol
>+ */
>+static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) {
>+ struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
>+
>+ if (!IS_ENABLED(CONFIG_X86))
>+ return;
>+
>+ if (value)
>+ data->flags |= TPM_TIS_CLK_ENABLE;
>+ else
>+ data->flags &= ~TPM_TIS_CLK_ENABLE;
>+}
>+
> static const struct tpm_class_ops tpm_tis = {
> .flags = TPM_OPS_AUTO_STARTUP,
> .status = tpm_tis_status,
>@@ -673,6 +693,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
> .req_canceled = tpm_tis_req_canceled,
> .request_locality = request_locality,
> .relinquish_locality = release_locality,
>+ .clk_enable = tpm_tis_clkrun_enable,
> };
>
> int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, diff
>--git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
>index 6bbac319ff3b..281f744a1a44 100644
>--- a/drivers/char/tpm/tpm_tis_core.h
>+++ b/drivers/char/tpm/tpm_tis_core.h
>@@ -81,6 +81,7 @@ enum tis_defaults {
>
> enum tpm_tis_flags {
> TPM_TIS_ITPM_WORKAROUND = BIT(0),
>+ TPM_TIS_CLK_ENABLE = BIT(1),
> };
>
> struct tpm_tis_data {
>diff --git a/include/linux/tpm.h b/include/linux/tpm.h index
>5a090f5ab335..881312d85574 100644
>--- a/include/linux/tpm.h
>+++ b/include/linux/tpm.h
>@@ -50,6 +50,7 @@ struct tpm_class_ops {
> unsigned long *timeout_cap);
> int (*request_locality)(struct tpm_chip *chip, int loc);
> void (*relinquish_locality)(struct tpm_chip *chip, int loc);
>+ void (*clk_enable)(struct tpm_chip *chip, bool value);
> };
>
> #if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
>--
>1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: azhar.shaikh@intel.com (Shaikh, Azhar)
To: linux-security-module@vger.kernel.org
Subject: [PATCH v4 1/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
Date: Wed, 22 Nov 2017 19:57:32 +0000 [thread overview]
Message-ID: <5FFFAD06ADE1CA4381B3F0F7C6AF582896F1F2@ORSMSX109.amr.corp.intel.com> (raw)
In-Reply-To: <1511303964-56294-2-git-send-email-azhar.shaikh@intel.com>
I found an issue with this patch.
In tpm_transmit() function after clk_enable is called with false, the assumption was whenever the next TPM transaction happens, the clock will be stopped in tpm_platform_end_xfer(). But in cases where after tpm_transmit is completed and there is no TPM transaction until next TPM command is being sent, the clocks will be running till then.
Can we write a dummy byte after clk_enable is set to false? Is this possible/correct way?
Or else as Jason suggested earlier, will get rid of tpm_platform_begin_xfer() and tpm_platform_end_xfer() and have those implemented in the clk_enable() function and have a high level action of enabling and disabling clocks.
Regards,
Azhar Shaikh
>-----Original Message-----
>From: Shaikh, Azhar
>Sent: Tuesday, November 21, 2017 2:39 PM
>To: jarkko.sakkinen at linux.intel.com; jgunthorpe at obsidianresearch.com;
>peterhuewe at gmx.de
>Cc: linux-security-module at vger.kernel.org; linux-kernel at vger.kernel.org;
>tpmdd-devel at lists.sourceforge.net; Shaikh, Azhar <azhar.shaikh@intel.com>
>Subject: [PATCH v4 1/2] tpm: Keep CLKRUN enabled throughout the duration
>of transmit_cmd()
>
>Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
>systems") disabled CLKRUN protocol during TPM transactions and re-enabled
>once the transaction is completed. But there were still some corner cases
>observed where, reading of TPM header failed for savestate command while
>going to suspend, which resulted in suspend failure.
>To fix this issue keep the CLKRUN protocol disabled for the entire duration of a
>single TPM command and not disabling and re-enabling again for every TPM
>transaction. For the other TPM accesses outside the flow of TPM command
>processing, disable and re-enable CLKRUN protocol for every TPM access.
>
>Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
>systems")
>
>Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
>Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
>---
> drivers/char/tpm/tpm-interface.c | 6 ++++++
> drivers/char/tpm/tpm_tis.c | 44 ++++++++++++++++++++++++----------------
> drivers/char/tpm/tpm_tis_core.c | 21 +++++++++++++++++++
>drivers/char/tpm/tpm_tis_core.h | 1 +
> include/linux/tpm.h | 1 +
> 5 files changed, 55 insertions(+), 18 deletions(-)
>
>diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-
>interface.c
>index 1d6729be4cd6..4661a810eab7 100644
>--- a/drivers/char/tpm/tpm-interface.c
>+++ b/drivers/char/tpm/tpm-interface.c
>@@ -413,6 +413,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct
>tpm_space *space,
> if (chip->dev.parent)
> pm_runtime_get_sync(chip->dev.parent);
>
>+ if (chip->ops->clk_enable != NULL)
>+ chip->ops->clk_enable(chip, true);
>+
> /* Store the decision as chip->locality will be changed. */
> need_locality = chip->locality == -1;
>
>@@ -489,6 +492,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct
>tpm_space *space,
> chip->locality = -1;
> }
> out_no_locality:
>+ if (chip->ops->clk_enable != NULL)
>+ chip->ops->clk_enable(chip, false);
>+
> if (chip->dev.parent)
> pm_runtime_put_sync(chip->dev.parent);
>
>diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index
>e2d1055fb814..76a7b64195c8 100644
>--- a/drivers/char/tpm/tpm_tis.c
>+++ b/drivers/char/tpm/tpm_tis.c
>@@ -46,6 +46,7 @@ struct tpm_info {
> struct tpm_tis_tcg_phy {
> struct tpm_tis_data priv;
> void __iomem *iobase;
>+ bool begin_xfer_done;
> };
>
> static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data
>*data) @@ -148,12 +149,15 @@ static inline bool is_bsw(void)
>
> /**
> * tpm_platform_begin_xfer() - clear LPC CLKRUN_EN i.e. clocks will be
>running
>+ * @data: struct tpm_tis_data instance
> */
>-static void tpm_platform_begin_xfer(void)
>+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
> {
> u32 clkrun_val;
>+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- if (!is_bsw())
>+ if (!is_bsw() || ((data->flags & TPM_TIS_CLK_ENABLE) &&
>+ phy->begin_xfer_done))
> return;
>
> clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET); @@
>-168,16 +172,21 @@ static void tpm_platform_begin_xfer(void)
> */
> outb(0xCC, 0x80);
>
>+ if (!(data->flags & TPM_TIS_CLK_ENABLE))
>+ phy->begin_xfer_done = false;
>+ else
>+ phy->begin_xfer_done = true;
> }
>
> /**
> * tpm_platform_end_xfer() - set LPC CLKRUN_EN i.e. clocks can be turned off
>+ * @data: struct tpm_tis_data instance
> */
>-static void tpm_platform_end_xfer(void)
>+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
> {
> u32 clkrun_val;
>
>- if (!is_bsw())
>+ if (!is_bsw() || (data->flags & TPM_TIS_CLK_ENABLE))
> return;
>
> clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET); @@
>-193,17 +202,16 @@ static void tpm_platform_end_xfer(void)
> outb(0xCC, 0x80);
>
> }
>+
> #else
> static inline bool is_bsw(void)
> {
> return false;
> }
>-
>-static void tpm_platform_begin_xfer(void)
>+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
> {
> }
>-
>-static void tpm_platform_end_xfer(void)
>+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
> {
> }
> #endif
>@@ -213,12 +221,12 @@ static int tpm_tcg_read_bytes(struct tpm_tis_data
>*data, u32 addr, u16 len, {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> while (len--)
> *result++ = ioread8(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -228,12 +236,12 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data
>*data, u32 addr, u16 len, {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> while (len--)
> iowrite8(*value++, phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -242,11 +250,11 @@ static int tpm_tcg_read16(struct tpm_tis_data
>*data, u32 addr, u16 *result) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> *result = ioread16(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -255,11 +263,11 @@ static int tpm_tcg_read32(struct tpm_tis_data
>*data, u32 addr, u32 *result) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> *result = ioread32(phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>@@ -268,11 +276,11 @@ static int tpm_tcg_write32(struct tpm_tis_data
>*data, u32 addr, u32 value) {
> struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
>
>- tpm_platform_begin_xfer();
>+ tpm_platform_begin_xfer(data);
>
> iowrite32(value, phy->iobase + addr);
>
>- tpm_platform_end_xfer();
>+ tpm_platform_end_xfer(data);
>
> return 0;
> }
>diff --git a/drivers/char/tpm/tpm_tis_core.c
>b/drivers/char/tpm/tpm_tis_core.c index fdde971bc810..64f5b46f5bf2
>100644
>--- a/drivers/char/tpm/tpm_tis_core.c
>+++ b/drivers/char/tpm/tpm_tis_core.c
>@@ -661,6 +661,26 @@ void tpm_tis_remove(struct tpm_chip *chip) }
>EXPORT_SYMBOL_GPL(tpm_tis_remove);
>
>+/**
>+ * tpm_tis_clkrun_enable() - Keep clkrun protocol disabled for entire
>duration
>+ * of a single TPM command
>+ * @chip: TPM chip to use
>+ * @value: 1 - Disable CLKRUN protocol, so that clocks are free running
>+ * 0 - Enable CLKRUN protocol
>+ */
>+static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value) {
>+ struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
>+
>+ if (!IS_ENABLED(CONFIG_X86))
>+ return;
>+
>+ if (value)
>+ data->flags |= TPM_TIS_CLK_ENABLE;
>+ else
>+ data->flags &= ~TPM_TIS_CLK_ENABLE;
>+}
>+
> static const struct tpm_class_ops tpm_tis = {
> .flags = TPM_OPS_AUTO_STARTUP,
> .status = tpm_tis_status,
>@@ -673,6 +693,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
> .req_canceled = tpm_tis_req_canceled,
> .request_locality = request_locality,
> .relinquish_locality = release_locality,
>+ .clk_enable = tpm_tis_clkrun_enable,
> };
>
> int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, diff
>--git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
>index 6bbac319ff3b..281f744a1a44 100644
>--- a/drivers/char/tpm/tpm_tis_core.h
>+++ b/drivers/char/tpm/tpm_tis_core.h
>@@ -81,6 +81,7 @@ enum tis_defaults {
>
> enum tpm_tis_flags {
> TPM_TIS_ITPM_WORKAROUND = BIT(0),
>+ TPM_TIS_CLK_ENABLE = BIT(1),
> };
>
> struct tpm_tis_data {
>diff --git a/include/linux/tpm.h b/include/linux/tpm.h index
>5a090f5ab335..881312d85574 100644
>--- a/include/linux/tpm.h
>+++ b/include/linux/tpm.h
>@@ -50,6 +50,7 @@ struct tpm_class_ops {
> unsigned long *timeout_cap);
> int (*request_locality)(struct tpm_chip *chip, int loc);
> void (*relinquish_locality)(struct tpm_chip *chip, int loc);
>+ void (*clk_enable)(struct tpm_chip *chip, bool value);
> };
>
> #if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
>--
>1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-11-22 19:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-21 22:39 [PATCH v4 0/2] ] Fix corner cases with disabling CLKRUN in tpm_tis Azhar Shaikh
2017-11-21 22:39 ` Azhar Shaikh
2017-11-21 22:39 ` [PATCH v4 1/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() Azhar Shaikh
2017-11-21 22:39 ` Azhar Shaikh
2017-11-22 19:57 ` Shaikh, Azhar [this message]
2017-11-22 19:57 ` Shaikh, Azhar
2017-11-22 19:57 ` Shaikh, Azhar
2017-11-21 22:39 ` [PATCH v4 2/2] tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy Azhar Shaikh
2017-11-21 22:39 ` Azhar Shaikh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5FFFAD06ADE1CA4381B3F0F7C6AF582896F1F2@ORSMSX109.amr.corp.intel.com \
--to=azhar.shaikh@intel.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.