All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: k.konieczny@partner.samsung.com
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Kukjin Kim <kgene@kernel.org>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Mark Rutland <mark.rutland@arm.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Viresh Kumar <vireshk@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v5 0/4] add coupled regulators for Exynos5422/5800
Date: Thu, 8 Aug 2019 10:47:14 +0900	[thread overview]
Message-ID: <6888b704-1971-4832-d7b9-092368c797d0@samsung.com> (raw)
In-Reply-To: <20190807133838.14678-1-k.konieczny@partner.samsung.com>

Hi Kamil,

When I applied them to testing branch, those don't have the author name
only just have the email address as following:
You have to edit the your git author information with your name.

author	k.konieczny@partner.samsung.com <k.konieczny@partner.samsung.com>	2019-08-07 15:38:36 +0200
committer	Chanwoo Choi <cw00.choi@samsung.com>	2019-08-08 10:35:16 +0900
commit	4304f4ecec93cebd255463d56b0a4f112ee9dc50 (patch)
tree	2859e566d6f68219f71a61e7c412717c1adba4f5
parent	57d85421038b458dd87ec268404ff608f90c36ae (diff)
download	linux-4304f4ecec93cebd255463d56b0a4f112ee9dc50.tar.gz

Regards,
Chanwoo Choi

On 19. 8. 7. 오후 10:38, k.konieczny@partner.samsung.com wrote:
> Hi,
> 
> The main purpose of this patch series is to add coupled regulators for
> Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
> and vdd_int to be at most 300mV. In exynos-bus instead of using
> regulator_set_voltage_tol() with default voltage tolerance it should be
> used regulator_set_voltage_triplet() with volatege range, and this is
> already present in opp/core.c code, so it can be reused. While at this,
> move setting regulators into opp/core.
> 
> This patchset was tested on Odroid XU3.
> 
> The DTS coupled regulators patch depends on previous patches.
> 
> Changes:
> v5:
> - squashed last patch "remove exynos_bus_passive_target()" into second
> - added Acked-by to patch "correct clock enable sequence"
> v4:
> - removed "opp: core: add regulators enable and disable" from patchset
>   as it was applied by Viresh Kumar and changed cover letter
> - fix patch "devfreq: exynos-bus: correct clock enable sequence" to
>   correct order of enable/disable
> - removed unrelated changes in "devfreq: exynos-bus: convert to use
>   dev_pm_opp_set_rate()"
> - added new patch "devfreq: exynos-bus: remove exynos_bus_passive_target()"
>   as suggested by Chanwoo Choi
> v3:
> - added new exynos-bus patch to correct clock and regulator enabling
>   and disabling sequence as suggested by Chanwoo Choi
> - corrected error path in enable and improved commit message in opp/core
> - improve comment in devfreq/exynos-bus.c before devfreq_recommended_opp()
> - change cover letter as there is new patch
> - added note before Signed-off-by in 4th patch
> v2:
> - improve regulators enable/disable code in opp/core as suggested by
>   Viresh Kumar
> - add new patch for remove unused dt-bindings as suggested by Krzysztof
>   Kozlowski
> 
> Kamil Konieczny (3):
>   devfreq: exynos-bus: correct clock enable sequence
>   devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()
>   dt-bindings: devfreq: exynos-bus: remove unused property
> 
> Marek Szyprowski (1):
>   ARM: dts: exynos: add initial data for coupled regulators for
>     Exynos5422/5800
> 
>  .../bindings/devfreq/exynos-bus.txt           |   2 -
>  arch/arm/boot/dts/exynos5420.dtsi             |  34 ++--
>  arch/arm/boot/dts/exynos5422-odroid-core.dtsi |   4 +
>  arch/arm/boot/dts/exynos5800-peach-pi.dts     |   4 +
>  arch/arm/boot/dts/exynos5800.dtsi             |  32 ++--
>  drivers/devfreq/exynos-bus.c                  | 153 +++++-------------
>  6 files changed, 78 insertions(+), 151 deletions(-)
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

WARNING: multiple messages have this Message-ID (diff)
From: Chanwoo Choi <cw00.choi@samsung.com>
To: k.konieczny@partner.samsung.com
Cc: Mark Rutland <mark.rutland@arm.com>, Nishanth Menon <nm@ti.com>,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Viresh Kumar <vireshk@kernel.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Kukjin Kim <kgene@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	devicetree@vger.kernel.org,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH v5 0/4] add coupled regulators for Exynos5422/5800
Date: Thu, 8 Aug 2019 10:47:14 +0900	[thread overview]
Message-ID: <6888b704-1971-4832-d7b9-092368c797d0@samsung.com> (raw)
In-Reply-To: <20190807133838.14678-1-k.konieczny@partner.samsung.com>

Hi Kamil,

When I applied them to testing branch, those don't have the author name
only just have the email address as following:
You have to edit the your git author information with your name.

author	k.konieczny@partner.samsung.com <k.konieczny@partner.samsung.com>	2019-08-07 15:38:36 +0200
committer	Chanwoo Choi <cw00.choi@samsung.com>	2019-08-08 10:35:16 +0900
commit	4304f4ecec93cebd255463d56b0a4f112ee9dc50 (patch)
tree	2859e566d6f68219f71a61e7c412717c1adba4f5
parent	57d85421038b458dd87ec268404ff608f90c36ae (diff)
download	linux-4304f4ecec93cebd255463d56b0a4f112ee9dc50.tar.gz

Regards,
Chanwoo Choi

On 19. 8. 7. 오후 10:38, k.konieczny@partner.samsung.com wrote:
> Hi,
> 
> The main purpose of this patch series is to add coupled regulators for
> Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
> and vdd_int to be at most 300mV. In exynos-bus instead of using
> regulator_set_voltage_tol() with default voltage tolerance it should be
> used regulator_set_voltage_triplet() with volatege range, and this is
> already present in opp/core.c code, so it can be reused. While at this,
> move setting regulators into opp/core.
> 
> This patchset was tested on Odroid XU3.
> 
> The DTS coupled regulators patch depends on previous patches.
> 
> Changes:
> v5:
> - squashed last patch "remove exynos_bus_passive_target()" into second
> - added Acked-by to patch "correct clock enable sequence"
> v4:
> - removed "opp: core: add regulators enable and disable" from patchset
>   as it was applied by Viresh Kumar and changed cover letter
> - fix patch "devfreq: exynos-bus: correct clock enable sequence" to
>   correct order of enable/disable
> - removed unrelated changes in "devfreq: exynos-bus: convert to use
>   dev_pm_opp_set_rate()"
> - added new patch "devfreq: exynos-bus: remove exynos_bus_passive_target()"
>   as suggested by Chanwoo Choi
> v3:
> - added new exynos-bus patch to correct clock and regulator enabling
>   and disabling sequence as suggested by Chanwoo Choi
> - corrected error path in enable and improved commit message in opp/core
> - improve comment in devfreq/exynos-bus.c before devfreq_recommended_opp()
> - change cover letter as there is new patch
> - added note before Signed-off-by in 4th patch
> v2:
> - improve regulators enable/disable code in opp/core as suggested by
>   Viresh Kumar
> - add new patch for remove unused dt-bindings as suggested by Krzysztof
>   Kozlowski
> 
> Kamil Konieczny (3):
>   devfreq: exynos-bus: correct clock enable sequence
>   devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()
>   dt-bindings: devfreq: exynos-bus: remove unused property
> 
> Marek Szyprowski (1):
>   ARM: dts: exynos: add initial data for coupled regulators for
>     Exynos5422/5800
> 
>  .../bindings/devfreq/exynos-bus.txt           |   2 -
>  arch/arm/boot/dts/exynos5420.dtsi             |  34 ++--
>  arch/arm/boot/dts/exynos5422-odroid-core.dtsi |   4 +
>  arch/arm/boot/dts/exynos5800-peach-pi.dts     |   4 +
>  arch/arm/boot/dts/exynos5800.dtsi             |  32 ++--
>  drivers/devfreq/exynos-bus.c                  | 153 +++++-------------
>  6 files changed, 78 insertions(+), 151 deletions(-)
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-08  1:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190807133855eucas1p1cab425b791262e8dee1b17cbe8b1b3da@eucas1p1.samsung.com>
2019-08-07 13:38 ` [PATCH v5 0/4] add coupled regulators for Exynos5422/5800 k.konieczny
2019-08-07 13:38   ` k.konieczny
     [not found]   ` <CGME20190807133856eucas1p2a893cd24096b089307e4216a1033a742@eucas1p2.samsung.com>
2019-08-07 13:38     ` [PATCH v5 1/4] devfreq: exynos-bus: correct clock enable sequence k.konieczny
2019-08-07 13:38       ` k.konieczny
     [not found]   ` <CGME20190807133857eucas1p23d2618db67434fa1301585cab059fa5b@eucas1p2.samsung.com>
2019-08-07 13:38     ` [PATCH v5 2/4] devfreq: exynos-bus: convert to use dev_pm_opp_set_rate() k.konieczny
2019-08-07 13:38       ` k.konieczny
2019-08-08  1:21       ` Chanwoo Choi
2019-08-08  1:21         ` Chanwoo Choi
     [not found]   ` <CGME20190807133858eucas1p28b272aa9a8dbbd95830f70098e25325a@eucas1p2.samsung.com>
2019-08-07 13:38     ` [PATCH v5 3/4] ARM: dts: exynos: add initial data for coupled regulators for Exynos5422/5800 k.konieczny
2019-08-07 13:38       ` k.konieczny
     [not found]   ` <CGME20190807133859eucas1p22355fae5d369c0c608c410049d82c1be@eucas1p2.samsung.com>
2019-08-07 13:38     ` [PATCH v5 4/4] dt-bindings: devfreq: exynos-bus: remove unused property k.konieczny
2019-08-07 13:38       ` k.konieczny
2019-08-08  1:47   ` Chanwoo Choi [this message]
2019-08-08  1:47     ` [PATCH v5 0/4] add coupled regulators for Exynos5422/5800 Chanwoo Choi
2019-08-08  9:01     ` Kamil Konieczny
2019-08-08  9:01       ` Kamil Konieczny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6888b704-1971-4832-d7b9-092368c797d0@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=k.konieczny@partner.samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.