All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: alsa-devel@alsa-project.org, linux-fbdev@vger.kernel.org,
	linux-omap@vger.kernel.org
Cc: peter.ujfalusi@ti.com, broonie@kernel.org,
	liam.r.girdwood@linux.intel.com, tomi.valkeinen@ti.com,
	detheridge@ti.com, jyri.sarha@iki.fi, Jyri Sarha <jsarha@ti.com>
Subject: [PATCH 04/12] OMAPDSS: hdmi_audio: Integrated ASoC DAI component driver implementation
Date: Thu, 26 Jun 2014 19:20:55 +0000	[thread overview]
Message-ID: <69f5b1481bd8b8a005b5d9142626f3529a0d71c7.1403807781.git.jsarha@ti.com> (raw)
In-Reply-To: <cover.1403807781.git.jsarha@ti.com>

Integrate ASoC DAI component driver in to the OMAP hdmi driver. The
patch also updates the relevant entry in ti,omap5-dss DT binding
document. The driver registers a dummy hdmi codec driver and a
simple-card driver to produce a fully functional ALSA device. The DAI
driver is implemented in hdmi_audio.c, but it still needs to be
registered from hdmi4.c or hdmi5.c.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/video/fbdev/omap2/dss/Makefile     |    2 +
 drivers/video/fbdev/omap2/dss/hdmi.h       |   38 +++-
 drivers/video/fbdev/omap2/dss/hdmi_audio.c |  317 ++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+), 2 deletions(-)
 create mode 100644 drivers/video/fbdev/omap2/dss/hdmi_audio.c

diff --git a/drivers/video/fbdev/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 245f933..8260987 100644
--- a/drivers/video/fbdev/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -14,5 +14,7 @@ omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
 omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
 	hdmi_phy.o
 omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP4_DSS_HDMI_AUDIO) += hdmi_audio.o
 omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
+omapdss-$(CONFIG_OMAP5_DSS_HDMI_AUDIO) += hdmi_audio.o
 ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index 927cb4d..cc6ecb5 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -25,6 +25,11 @@
 #include <linux/hdmi.h>
 #include <video/omapdss.h>
 
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#endif
+
 #include "dss.h"
 
 /* HDMI Wrapper */
@@ -338,6 +343,35 @@ int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
 	struct hdmi_phy_data *phy);
 
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+struct hdmi_audio_data {
+	/* These should be initialized when hdmi_audio_register() is called */
+	struct mutex *hdmi_lock;
+	struct hdmi_wp_data *wp;
+	struct hdmi_core_data *core;
+	struct hdmi_config *cfg;
+	struct snd_soc_dai_driver *hdmi_dai_drv;
+
+	int (*audio_start)(struct hdmi_core_data *core,
+			   struct hdmi_wp_data *wp);
+	void (*audio_stop)(struct hdmi_core_data *core,
+			   struct hdmi_wp_data *wp);
+	int (*audio_config)(struct hdmi_core_data *core,
+			    struct hdmi_wp_data *wp,
+			    struct omap_dss_audio *audio,
+			    u32 pclk);
+
+	/* These are of audio implementation's private use */
+	struct snd_dmaengine_dai_dma_data dma_data;
+	struct omap_dss_audio dss_audio;
+	struct snd_aes_iec958 iec;
+	struct snd_cea_861_aud_if cea;
+	struct platform_device *codec_pdev;
+	struct platform_device *card_pdev;
+};
+
+int hdmi_audio_register(struct platform_device *pdev);
+void hdmi_audio_unregister(struct platform_device *pdev);
+
 int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts);
 int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable);
 int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable);
@@ -345,9 +379,9 @@ void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp,
 		struct hdmi_audio_format *aud_fmt);
 void hdmi_wp_audio_config_dma(struct hdmi_wp_data *wp,
 		struct hdmi_audio_dma *aud_dma);
-static inline bool hdmi_mode_has_audio(int mode)
+static inline bool hdmi_mode_has_audio(struct hdmi_config *cfg)
 {
-	return mode = HDMI_HDMI ? true : false;
+	return cfg->hdmi_dvi_mode = HDMI_HDMI ? true : false;
 }
 #endif
 #endif
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_audio.c b/drivers/video/fbdev/omap2/dss/hdmi_audio.c
new file mode 100644
index 0000000..a8a0b78
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi_audio.c
@@ -0,0 +1,317 @@
+/*
+ * OMAP4+ HDMI audio
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#include <sound/asoundef.h>
+#include <sound/omap-pcm.h>
+#include <sound/simple_card.h>
+
+#include "hdmi.h"
+
+static int hdmi_dai_startup(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int ret;
+	/*
+	 * Make sure that the period bytes are multiple of the DMA packet size.
+	 * Largest packet size we use is 32 32-bit words = 128 bytes
+	 */
+	ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
+	if (ret < 0) {
+		dev_err(dai->dev, "could not apply constraint\n");
+		return ret;
+	}
+
+	mutex_lock(dd->hdmi_lock);
+	ret = hdmi_mode_has_audio(dd->cfg);
+	mutex_unlock(dd->hdmi_lock);
+	if (!ret) {
+		dev_err(dai->dev, "audio not supported\n");
+		return -ENODEV;
+	}
+
+	snd_soc_dai_set_dma_data(dai, substream, &dd->dma_data);
+
+	return 0;
+}
+
+static int hdmi_dai_prepare(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int r;
+
+	mutex_lock(dd->hdmi_lock);
+
+	if (!hdmi_mode_has_audio(dd->cfg)) {
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_wp_audio_enable(dd->wp, true);
+
+err:
+	mutex_unlock(dd->hdmi_lock);
+	return r;
+}
+
+static int hdmi_dai_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	struct snd_aes_iec958 *iec = &dd->iec;
+	struct snd_cea_861_aud_if *cea = &dd->cea;
+	int err;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		dd->dma_data.maxburst = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		dd->dma_data.maxburst = 32;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	dd->dss_audio.iec = iec;
+	dd->dss_audio.cea = cea;
+	/*
+	 * fill the IEC-60958 channel status word
+	 */
+	/* initialize the word bytes */
+	memset(iec->status, 0, sizeof(iec->status));
+
+	/* specify IEC-60958-3 (commercial use) */
+	iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+
+	/* specify that the audio is LPCM*/
+	iec->status[0] &= ~IEC958_AES0_NONAUDIO;
+
+	iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+
+	iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
+
+	iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
+
+	iec->status[1] = IEC958_AES1_CON_GENERAL;
+
+	iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
+
+	iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
+
+	switch (params_rate(params)) {
+	case 32000:
+		iec->status[3] |= IEC958_AES3_CON_FS_32000;
+		break;
+	case 44100:
+		iec->status[3] |= IEC958_AES3_CON_FS_44100;
+		break;
+	case 48000:
+		iec->status[3] |= IEC958_AES3_CON_FS_48000;
+		break;
+	case 88200:
+		iec->status[3] |= IEC958_AES3_CON_FS_88200;
+		break;
+	case 96000:
+		iec->status[3] |= IEC958_AES3_CON_FS_96000;
+		break;
+	case 176400:
+		iec->status[3] |= IEC958_AES3_CON_FS_176400;
+		break;
+	case 192000:
+		iec->status[3] |= IEC958_AES3_CON_FS_192000;
+		break;
+	default:
+		dev_err(dai->dev, "rate not supported!\n");
+		return -EINVAL;
+	}
+
+	/* specify the clock accuracy */
+	iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
+
+	/*
+	 * specify the word length. The same word length value can mean
+	 * two different lengths. Hence, we need to specify the maximum
+	 * word length as well.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
+		iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
+		iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Fill the CEA-861 audio infoframe (see spec for details)
+	 */
+
+	cea->db1_ct_cc = (params_channels(params) - 1)
+		& CEA861_AUDIO_INFOFRAME_DB1CC;
+	cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
+
+	cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
+	cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
+
+	cea->db3 = 0; /* not used, all zeros */
+
+	/*
+	 * The OMAP HDMI IP requires to use the 8-channel channel code when
+	 * transmitting more than two channels.
+	 */
+	if (params_channels(params) = 2)
+		cea->db4_ca = 0x0;
+	else
+		cea->db4_ca = 0x13;
+
+	cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
+	/* the expression is trivial but makes clear what we are doing */
+	cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
+
+	mutex_lock(dd->hdmi_lock);
+
+	if (!hdmi_mode_has_audio(dd->cfg)) {
+		err = -EPERM;
+		goto err;
+	}
+
+	err = dd->audio_config(dd->core, dd->wp, &dd->dss_audio,
+			       dd->cfg->timings.pixelclock);
+err:
+	mutex_unlock(dd->hdmi_lock);
+	return err;
+}
+
+static int hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		err = dd->audio_start(dd->core, dd->wp);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		dd->audio_start(dd->core, dd->wp);
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static void hdmi_dai_shutdown(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+
+	hdmi_wp_audio_enable(dd->wp, false);
+}
+
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
+	.startup	= hdmi_dai_startup,
+	.hw_params	= hdmi_dai_hw_params,
+	.prepare	= hdmi_dai_prepare,
+	.trigger	= hdmi_dai_trigger,
+	.shutdown	= hdmi_dai_shutdown,
+};
+
+static const struct snd_soc_component_driver omap_hdmi_component = {
+	.name = "omapdss_hdmi",
+};
+
+static struct asoc_simple_card_info card_info = {
+	.name = "HDMI",
+	.card = "OMAPHDMI",
+	.codec_dai.name = "hdmi-hifi",
+};
+
+int hdmi_audio_register(struct platform_device *pdev)
+{
+	struct hdmi_audio_data *dd = dev_get_drvdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	dd->dma_data.addr = hdmi_wp_get_phys_addr(dd->wp) + HDMI_WP_AUDIO_DATA;
+	dd->dma_data.filter_data = "audio_tx";
+	dd->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->hdmi_dai_drv->ops = &hdmi_dai_ops,
+
+	ret = snd_soc_register_component(dev, &omap_hdmi_component,
+					 dd->hdmi_dai_drv, 1);
+	if (ret)
+		return ret;
+
+	ret = omap_pcm_platform_register(dev);
+	if (ret)
+		return ret;
+
+	dd->codec_pdev = platform_device_register_data(dev, "hdmi-audio-codec",
+						       0, NULL, 0);
+	if (IS_ERR(dd->codec_pdev)) {
+		snd_soc_unregister_component(dev);
+		return PTR_ERR(dd->codec_pdev);
+	}
+
+	card_info.cpu_dai.name = dev_name(dev);
+	card_info.platform = dev_name(dev);
+	card_info.codec = dev_name(&dd->codec_pdev->dev);
+
+	dd->card_pdev +		platform_device_register_data(dev, "asoc-simple-card", 0,
+					      &card_info, sizeof(card_info));
+	if (IS_ERR(dd->card_pdev)) {
+		snd_soc_unregister_component(dev);
+		platform_device_unregister(dd->codec_pdev);
+		return PTR_ERR(dd->card_pdev);
+	}
+	return 0;
+}
+
+void hdmi_audio_unregister(struct platform_device *pdev)
+{
+	struct hdmi_audio_data *dd = dev_get_drvdata(&pdev->dev);
+
+	platform_device_unregister(dd->card_pdev);
+	platform_device_unregister(dd->codec_pdev);
+	snd_soc_unregister_component(&pdev->dev);
+}
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Jyri Sarha <jsarha@ti.com>
To: alsa-devel@alsa-project.org, linux-fbdev@vger.kernel.org,
	linux-omap@vger.kernel.org
Cc: peter.ujfalusi@ti.com, broonie@kernel.org,
	liam.r.girdwood@linux.intel.com, tomi.valkeinen@ti.com,
	detheridge@ti.com, jyri.sarha@iki.fi, Jyri Sarha <jsarha@ti.com>
Subject: [PATCH 04/12] OMAPDSS: hdmi_audio: Integrated ASoC DAI component driver implementation
Date: Thu, 26 Jun 2014 22:20:55 +0300	[thread overview]
Message-ID: <69f5b1481bd8b8a005b5d9142626f3529a0d71c7.1403807781.git.jsarha@ti.com> (raw)
In-Reply-To: <cover.1403807781.git.jsarha@ti.com>

Integrate ASoC DAI component driver in to the OMAP hdmi driver. The
patch also updates the relevant entry in ti,omap5-dss DT binding
document. The driver registers a dummy hdmi codec driver and a
simple-card driver to produce a fully functional ALSA device. The DAI
driver is implemented in hdmi_audio.c, but it still needs to be
registered from hdmi4.c or hdmi5.c.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/video/fbdev/omap2/dss/Makefile     |    2 +
 drivers/video/fbdev/omap2/dss/hdmi.h       |   38 +++-
 drivers/video/fbdev/omap2/dss/hdmi_audio.c |  317 ++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+), 2 deletions(-)
 create mode 100644 drivers/video/fbdev/omap2/dss/hdmi_audio.c

diff --git a/drivers/video/fbdev/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 245f933..8260987 100644
--- a/drivers/video/fbdev/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -14,5 +14,7 @@ omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
 omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
 	hdmi_phy.o
 omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP4_DSS_HDMI_AUDIO) += hdmi_audio.o
 omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
+omapdss-$(CONFIG_OMAP5_DSS_HDMI_AUDIO) += hdmi_audio.o
 ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index 927cb4d..cc6ecb5 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -25,6 +25,11 @@
 #include <linux/hdmi.h>
 #include <video/omapdss.h>
 
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#endif
+
 #include "dss.h"
 
 /* HDMI Wrapper */
@@ -338,6 +343,35 @@ int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
 	struct hdmi_phy_data *phy);
 
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+struct hdmi_audio_data {
+	/* These should be initialized when hdmi_audio_register() is called */
+	struct mutex *hdmi_lock;
+	struct hdmi_wp_data *wp;
+	struct hdmi_core_data *core;
+	struct hdmi_config *cfg;
+	struct snd_soc_dai_driver *hdmi_dai_drv;
+
+	int (*audio_start)(struct hdmi_core_data *core,
+			   struct hdmi_wp_data *wp);
+	void (*audio_stop)(struct hdmi_core_data *core,
+			   struct hdmi_wp_data *wp);
+	int (*audio_config)(struct hdmi_core_data *core,
+			    struct hdmi_wp_data *wp,
+			    struct omap_dss_audio *audio,
+			    u32 pclk);
+
+	/* These are of audio implementation's private use */
+	struct snd_dmaengine_dai_dma_data dma_data;
+	struct omap_dss_audio dss_audio;
+	struct snd_aes_iec958 iec;
+	struct snd_cea_861_aud_if cea;
+	struct platform_device *codec_pdev;
+	struct platform_device *card_pdev;
+};
+
+int hdmi_audio_register(struct platform_device *pdev);
+void hdmi_audio_unregister(struct platform_device *pdev);
+
 int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts);
 int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable);
 int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable);
@@ -345,9 +379,9 @@ void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp,
 		struct hdmi_audio_format *aud_fmt);
 void hdmi_wp_audio_config_dma(struct hdmi_wp_data *wp,
 		struct hdmi_audio_dma *aud_dma);
-static inline bool hdmi_mode_has_audio(int mode)
+static inline bool hdmi_mode_has_audio(struct hdmi_config *cfg)
 {
-	return mode == HDMI_HDMI ? true : false;
+	return cfg->hdmi_dvi_mode == HDMI_HDMI ? true : false;
 }
 #endif
 #endif
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_audio.c b/drivers/video/fbdev/omap2/dss/hdmi_audio.c
new file mode 100644
index 0000000..a8a0b78
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi_audio.c
@@ -0,0 +1,317 @@
+/*
+ * OMAP4+ HDMI audio
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#include <sound/asoundef.h>
+#include <sound/omap-pcm.h>
+#include <sound/simple_card.h>
+
+#include "hdmi.h"
+
+static int hdmi_dai_startup(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int ret;
+	/*
+	 * Make sure that the period bytes are multiple of the DMA packet size.
+	 * Largest packet size we use is 32 32-bit words = 128 bytes
+	 */
+	ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
+	if (ret < 0) {
+		dev_err(dai->dev, "could not apply constraint\n");
+		return ret;
+	}
+
+	mutex_lock(dd->hdmi_lock);
+	ret = hdmi_mode_has_audio(dd->cfg);
+	mutex_unlock(dd->hdmi_lock);
+	if (!ret) {
+		dev_err(dai->dev, "audio not supported\n");
+		return -ENODEV;
+	}
+
+	snd_soc_dai_set_dma_data(dai, substream, &dd->dma_data);
+
+	return 0;
+}
+
+static int hdmi_dai_prepare(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int r;
+
+	mutex_lock(dd->hdmi_lock);
+
+	if (!hdmi_mode_has_audio(dd->cfg)) {
+		r = -EPERM;
+		goto err;
+	}
+
+	r = hdmi_wp_audio_enable(dd->wp, true);
+
+err:
+	mutex_unlock(dd->hdmi_lock);
+	return r;
+}
+
+static int hdmi_dai_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	struct snd_aes_iec958 *iec = &dd->iec;
+	struct snd_cea_861_aud_if *cea = &dd->cea;
+	int err;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		dd->dma_data.maxburst = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		dd->dma_data.maxburst = 32;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	dd->dss_audio.iec = iec;
+	dd->dss_audio.cea = cea;
+	/*
+	 * fill the IEC-60958 channel status word
+	 */
+	/* initialize the word bytes */
+	memset(iec->status, 0, sizeof(iec->status));
+
+	/* specify IEC-60958-3 (commercial use) */
+	iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+
+	/* specify that the audio is LPCM*/
+	iec->status[0] &= ~IEC958_AES0_NONAUDIO;
+
+	iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+
+	iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
+
+	iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
+
+	iec->status[1] = IEC958_AES1_CON_GENERAL;
+
+	iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
+
+	iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
+
+	switch (params_rate(params)) {
+	case 32000:
+		iec->status[3] |= IEC958_AES3_CON_FS_32000;
+		break;
+	case 44100:
+		iec->status[3] |= IEC958_AES3_CON_FS_44100;
+		break;
+	case 48000:
+		iec->status[3] |= IEC958_AES3_CON_FS_48000;
+		break;
+	case 88200:
+		iec->status[3] |= IEC958_AES3_CON_FS_88200;
+		break;
+	case 96000:
+		iec->status[3] |= IEC958_AES3_CON_FS_96000;
+		break;
+	case 176400:
+		iec->status[3] |= IEC958_AES3_CON_FS_176400;
+		break;
+	case 192000:
+		iec->status[3] |= IEC958_AES3_CON_FS_192000;
+		break;
+	default:
+		dev_err(dai->dev, "rate not supported!\n");
+		return -EINVAL;
+	}
+
+	/* specify the clock accuracy */
+	iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
+
+	/*
+	 * specify the word length. The same word length value can mean
+	 * two different lengths. Hence, we need to specify the maximum
+	 * word length as well.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
+		iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
+		iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Fill the CEA-861 audio infoframe (see spec for details)
+	 */
+
+	cea->db1_ct_cc = (params_channels(params) - 1)
+		& CEA861_AUDIO_INFOFRAME_DB1CC;
+	cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
+
+	cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
+	cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
+
+	cea->db3 = 0; /* not used, all zeros */
+
+	/*
+	 * The OMAP HDMI IP requires to use the 8-channel channel code when
+	 * transmitting more than two channels.
+	 */
+	if (params_channels(params) == 2)
+		cea->db4_ca = 0x0;
+	else
+		cea->db4_ca = 0x13;
+
+	cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
+	/* the expression is trivial but makes clear what we are doing */
+	cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
+
+	mutex_lock(dd->hdmi_lock);
+
+	if (!hdmi_mode_has_audio(dd->cfg)) {
+		err = -EPERM;
+		goto err;
+	}
+
+	err = dd->audio_config(dd->core, dd->wp, &dd->dss_audio,
+			       dd->cfg->timings.pixelclock);
+err:
+	mutex_unlock(dd->hdmi_lock);
+	return err;
+}
+
+static int hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+			    struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		err = dd->audio_start(dd->core, dd->wp);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		dd->audio_start(dd->core, dd->wp);
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static void hdmi_dai_shutdown(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_audio_data *dd = snd_soc_dai_get_drvdata(dai);
+
+	hdmi_wp_audio_enable(dd->wp, false);
+}
+
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
+	.startup	= hdmi_dai_startup,
+	.hw_params	= hdmi_dai_hw_params,
+	.prepare	= hdmi_dai_prepare,
+	.trigger	= hdmi_dai_trigger,
+	.shutdown	= hdmi_dai_shutdown,
+};
+
+static const struct snd_soc_component_driver omap_hdmi_component = {
+	.name = "omapdss_hdmi",
+};
+
+static struct asoc_simple_card_info card_info = {
+	.name = "HDMI",
+	.card = "OMAPHDMI",
+	.codec_dai.name = "hdmi-hifi",
+};
+
+int hdmi_audio_register(struct platform_device *pdev)
+{
+	struct hdmi_audio_data *dd = dev_get_drvdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	dd->dma_data.addr = hdmi_wp_get_phys_addr(dd->wp) + HDMI_WP_AUDIO_DATA;
+	dd->dma_data.filter_data = "audio_tx";
+	dd->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->hdmi_dai_drv->ops = &hdmi_dai_ops,
+
+	ret = snd_soc_register_component(dev, &omap_hdmi_component,
+					 dd->hdmi_dai_drv, 1);
+	if (ret)
+		return ret;
+
+	ret = omap_pcm_platform_register(dev);
+	if (ret)
+		return ret;
+
+	dd->codec_pdev = platform_device_register_data(dev, "hdmi-audio-codec",
+						       0, NULL, 0);
+	if (IS_ERR(dd->codec_pdev)) {
+		snd_soc_unregister_component(dev);
+		return PTR_ERR(dd->codec_pdev);
+	}
+
+	card_info.cpu_dai.name = dev_name(dev);
+	card_info.platform = dev_name(dev);
+	card_info.codec = dev_name(&dd->codec_pdev->dev);
+
+	dd->card_pdev =
+		platform_device_register_data(dev, "asoc-simple-card", 0,
+					      &card_info, sizeof(card_info));
+	if (IS_ERR(dd->card_pdev)) {
+		snd_soc_unregister_component(dev);
+		platform_device_unregister(dd->codec_pdev);
+		return PTR_ERR(dd->card_pdev);
+	}
+	return 0;
+}
+
+void hdmi_audio_unregister(struct platform_device *pdev)
+{
+	struct hdmi_audio_data *dd = dev_get_drvdata(&pdev->dev);
+
+	platform_device_unregister(dd->card_pdev);
+	platform_device_unregister(dd->codec_pdev);
+	snd_soc_unregister_component(&pdev->dev);
+}
-- 
1.7.9.5


  parent reply	other threads:[~2014-06-26 19:20 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-26 19:20 [PATCH 00/12] Rework OMAP4+ HDMI audio support Jyri Sarha
2014-06-26 19:20 ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 01/12] ARM: OMAP2+: Remove non working OMAP HDMI audio initialization Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-07-07 11:46   ` Tony Lindgren
2014-07-07 11:46     ` Tony Lindgren
2014-07-08  7:30     ` Peter Ujfalusi
2014-07-08  7:30       ` Peter Ujfalusi
2014-07-08  8:09       ` Tony Lindgren
2014-07-08  8:09         ` Tony Lindgren
2014-07-15 19:25         ` Jyri Sarha
2014-07-15 19:25           ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 02/12] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 03/12] OMAPDSS: hdmi_wp: Add function for getting hdmi_wp physical base address Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-27 10:41   ` Tomi Valkeinen
2014-06-27 10:41     ` Tomi Valkeinen
2014-06-27 11:35     ` Jyri Sarha
2014-06-27 11:35       ` Jyri Sarha
2014-06-26 19:20 ` Jyri Sarha [this message]
2014-06-26 19:20   ` [PATCH 04/12] OMAPDSS: hdmi_audio: Integrated ASoC DAI component driver implementation Jyri Sarha
2014-06-27 11:10   ` Tomi Valkeinen
2014-06-27 11:10     ` Tomi Valkeinen
2014-06-27 11:57   ` Tomi Valkeinen
2014-06-27 11:57     ` Tomi Valkeinen
2014-06-27 12:06     ` Jyri Sarha
2014-06-27 12:06       ` Jyri Sarha
2014-06-27 12:11   ` Tomi Valkeinen
2014-06-27 12:11     ` Tomi Valkeinen
2014-06-27 12:26     ` Jyri Sarha
2014-06-27 12:26       ` Jyri Sarha
2014-06-27 13:06       ` Tomi Valkeinen
2014-06-27 13:06         ` Tomi Valkeinen
2014-06-27 15:33         ` Jyri Sarha
2014-06-27 15:33           ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 05/12] OMAPDSS: Kconfig: Select audio dependencies if OMAP4_DSS_HDMI_AUDIO=y Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 06/12] OMAPDSS: hdmi4: Register HDMI audio ASoC drivers from HDMI driver Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-27 11:39   ` Tomi Valkeinen
2014-06-27 11:39     ` Tomi Valkeinen
2014-06-27 15:33     ` Jyri Sarha
2014-06-27 15:33       ` Jyri Sarha
2014-06-26 19:20 ` [PATCH 07/12] OMAPDSS: Kconfig: Select audio dependencies if OMAP5_DSS_HDMI_AUDIO=y Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-27 11:49   ` Tomi Valkeinen
2014-06-27 11:49     ` Tomi Valkeinen
2014-06-26 19:20 ` [PATCH 08/12] OMAPDSS: hdmi5: Register HDMI audio ASoC drivers from HDMI driver Jyri Sarha
2014-06-26 19:20   ` Jyri Sarha
2014-06-26 19:21 ` [PATCH 09/12] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options Jyri Sarha
2014-06-26 19:21   ` Jyri Sarha
2014-06-27 12:17   ` Mark Brown
2014-06-27 12:17     ` Mark Brown
2014-06-26 19:21 ` [PATCH 10/12] OMAPDSS: hdmi4: Remove callbacks for an external ASoC DAI driver Jyri Sarha
2014-06-26 19:21   ` Jyri Sarha
2014-06-26 19:21 ` [PATCH 11/12] OMAPDSS: hdmi5: " Jyri Sarha
2014-06-26 19:21   ` Jyri Sarha
2014-06-26 19:21 ` [PATCH 12/12] OMAPDSS: Remove all references to obsolete HDMI audio callbacks Jyri Sarha
2014-06-26 19:21   ` Jyri Sarha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=69f5b1481bd8b8a005b5d9142626f3529a0d71c7.1403807781.git.jsarha@ti.com \
    --to=jsarha@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=detheridge@ti.com \
    --cc=jyri.sarha@iki.fi \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.