All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
	dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
	"Pekka Paalanen" <ppaalanen@gmail.com>,
	"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>
Subject: Re: [PATCH 4/4] drm: rcar-du: kms: Configure the CLU
Date: Mon, 21 Dec 2020 14:13:57 +0000	[thread overview]
Message-ID: <6da58b9e-02e8-b77d-deff-8257924604fb@ideasonboard.com> (raw)
In-Reply-To: <20201221015730.28333-5-laurent.pinchart+renesas@ideasonboard.com>

Hi Laurent,

On 21/12/2020 01:57, Laurent Pinchart wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Link the DRM 3D-CLU configuration to the CMM setup configuration.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

And for the updates from my original patch (variable rename, and
property blob rework, and that ... obvious bug ... from my patch that's
now obviously gone :-D ...)

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 426b1870b3cb..5c77017084ed 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -484,19 +484,23 @@ static int rcar_du_cmm_check(struct drm_crtc *crtc,
>  			     struct drm_crtc_state *state)
>  {
>  	struct drm_property_blob *drm_lut = state->gamma_lut;
> +	struct drm_property_blob *drm_clu = state->cubic_lut;
>  	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
>  	struct device *dev = rcrtc->dev->dev;
>  
> -	if (!drm_lut)
> -		return 0;
> -
> -	/* We only accept fully populated LUT tables. */
> -	if (drm_color_lut_size(drm_lut) != CM2_LUT_SIZE) {
> +	/* We only accept fully populated LUTs. */
> +	if (drm_lut && drm_color_lut_size(drm_lut) != CM2_LUT_SIZE) {
>  		dev_err(dev, "invalid gamma lut size: %zu bytes\n",
>  			drm_lut->length);
>  		return -EINVAL;
>  	}
>  
> +	if (drm_clu && drm_color_lut_size(drm_clu) != CM2_CLU_SIZE) {
> +		dev_err(dev, "invalid cubic lut size: %zu bytes\n",
> +			drm_clu->length);
> +		return -EINVAL;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -518,6 +522,15 @@ static void rcar_du_cmm_setup(struct rcar_du_crtc *rcrtc,
>  				     ? new_state->gamma_lut->data : NULL;
>  	}
>  
> +	if (!old_state ||
> +	    !old_state->cubic_lut != !new_state->cubic_lut ||
> +	    (old_state->cubic_lut && new_state->cubic_lut &&
> +	     old_state->cubic_lut->base.id != new_state->cubic_lut->base.id)) {
> +		cmm_config.clu.update = true;
> +		cmm_config.clu.table = new_state->cubic_lut
> +				     ? new_state->cubic_lut->data : NULL;
> +	}
> +
>  	rcar_cmm_setup(rcrtc->cmm, &cmm_config);
>  }
>  
> 

-- 
Regards
--
Kieran

WARNING: multiple messages have this Message-ID (diff)
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
	dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Subject: Re: [PATCH 4/4] drm: rcar-du: kms: Configure the CLU
Date: Mon, 21 Dec 2020 14:13:57 +0000	[thread overview]
Message-ID: <6da58b9e-02e8-b77d-deff-8257924604fb@ideasonboard.com> (raw)
In-Reply-To: <20201221015730.28333-5-laurent.pinchart+renesas@ideasonboard.com>

Hi Laurent,

On 21/12/2020 01:57, Laurent Pinchart wrote:
> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Link the DRM 3D-CLU configuration to the CMM setup configuration.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

And for the updates from my original patch (variable rename, and
property blob rework, and that ... obvious bug ... from my patch that's
now obviously gone :-D ...)

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 426b1870b3cb..5c77017084ed 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -484,19 +484,23 @@ static int rcar_du_cmm_check(struct drm_crtc *crtc,
>  			     struct drm_crtc_state *state)
>  {
>  	struct drm_property_blob *drm_lut = state->gamma_lut;
> +	struct drm_property_blob *drm_clu = state->cubic_lut;
>  	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
>  	struct device *dev = rcrtc->dev->dev;
>  
> -	if (!drm_lut)
> -		return 0;
> -
> -	/* We only accept fully populated LUT tables. */
> -	if (drm_color_lut_size(drm_lut) != CM2_LUT_SIZE) {
> +	/* We only accept fully populated LUTs. */
> +	if (drm_lut && drm_color_lut_size(drm_lut) != CM2_LUT_SIZE) {
>  		dev_err(dev, "invalid gamma lut size: %zu bytes\n",
>  			drm_lut->length);
>  		return -EINVAL;
>  	}
>  
> +	if (drm_clu && drm_color_lut_size(drm_clu) != CM2_CLU_SIZE) {
> +		dev_err(dev, "invalid cubic lut size: %zu bytes\n",
> +			drm_clu->length);
> +		return -EINVAL;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -518,6 +522,15 @@ static void rcar_du_cmm_setup(struct rcar_du_crtc *rcrtc,
>  				     ? new_state->gamma_lut->data : NULL;
>  	}
>  
> +	if (!old_state ||
> +	    !old_state->cubic_lut != !new_state->cubic_lut ||
> +	    (old_state->cubic_lut && new_state->cubic_lut &&
> +	     old_state->cubic_lut->base.id != new_state->cubic_lut->base.id)) {
> +		cmm_config.clu.update = true;
> +		cmm_config.clu.table = new_state->cubic_lut
> +				     ? new_state->cubic_lut->data : NULL;
> +	}
> +
>  	rcar_cmm_setup(rcrtc->cmm, &cmm_config);
>  }
>  
> 

-- 
Regards
--
Kieran
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-12-21 14:14 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-21  1:57 [PATCH 0/4] drm: rcar-du: Add cubic LUT support Laurent Pinchart
2020-12-21  1:57 ` Laurent Pinchart
2020-12-21  1:57 ` [PATCH 1/4] drm: rcar-du: cmm: Refactor LUT configuration Laurent Pinchart
2020-12-21  1:57   ` Laurent Pinchart
2020-12-21 13:55   ` Kieran Bingham
2020-12-21 13:55     ` Kieran Bingham
2020-12-21  1:57 ` [PATCH 2/4] drm: rcar-du: cmm: Provide 3D-CLU support Laurent Pinchart
2020-12-21  1:57   ` Laurent Pinchart
2020-12-21 14:00   ` Kieran Bingham
2020-12-21 14:00     ` Kieran Bingham
2020-12-21  1:57 ` [PATCH 3/4] drm: Extend color correction to support 3D-CLU Laurent Pinchart
2020-12-21  1:57   ` Laurent Pinchart
2020-12-21 14:09   ` Kieran Bingham
2020-12-21 14:09     ` Kieran Bingham
2020-12-22  8:00     ` Laurent Pinchart
2020-12-22  8:00       ` Laurent Pinchart
2020-12-21 18:36   ` Daniel Vetter
2020-12-21 18:36     ` Daniel Vetter
2020-12-21 18:38     ` Laurent Pinchart
2020-12-21 18:38       ` Laurent Pinchart
2020-12-21 21:59       ` Daniel Vetter
2020-12-21 21:59         ` Daniel Vetter
2021-01-12 16:06   ` Ville Syrjälä
2021-01-12 16:06     ` Ville Syrjälä
2021-01-26  9:34   ` Sandy Huang
2021-01-26  9:53   ` Sandy Huang
2020-12-21  1:57 ` [PATCH 4/4] drm: rcar-du: kms: Configure the CLU Laurent Pinchart
2020-12-21  1:57   ` Laurent Pinchart
2020-12-21 14:13   ` Kieran Bingham [this message]
2020-12-21 14:13     ` Kieran Bingham
2020-12-21  8:53 ` [PATCH 0/4] drm: rcar-du: Add cubic LUT support Simon Ser
2020-12-21  8:53   ` Simon Ser
2021-01-12 11:50 ` Pekka Paalanen
2021-01-12 11:50   ` Pekka Paalanen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6da58b9e-02e8-b77d-deff-8257924604fb@ideasonboard.com \
    --to=kieran.bingham@ideasonboard.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=ppaalanen@gmail.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.